L Jumadi

Exploring further my box, seems it using NAND type memory as cant detected by my current armbian.. read on forum it seems best way is to forget about it, no problem at least can run on sdcard fast enough and can use it than only for tv box :) Maybe just need to seek better sdcard as my last sdcard failed and the new one is same brand and size as old one :D

Greatt, after I recompile and write to new card (old one just not recognize in any device again) its offer to search Wifi hotspot after boot and can connect without copying your firmware files.. I guess its already there but need patch on your build cause I read it fixed on Rockchip forum by @jock thanks to all tv box supporter

Sure but Im not sure which one is wifi chip as not known like "brcm or rtl" maybe all clone Strange error -200 when uploaded photo, so I just read on IC I suspect as Wifi.. its written: LG642 and try to google it its ever mention on armbian forum as clone

Thanks @Nick A I already try it wifi still no detected, try to link to *transpeed-8k616-t also on it and on brcmfmac43342-sdio all still same error. I already check again dram para still missing 1 dram_tpr6 = <0x39808080> so I try rebuild with correct parameter first and try again later, thanks

Success build on WSL with ./compile.sh build BOARD=transpeed-8k618-t BRANCH=edge BUILD_DESKTOP=no BUILD_MINIMAL=no KERNEL_CONFIGURE=no RELEASE=jammy Using DRAM Defconfig as follow: +CONFIG_DRAM_SUN50I_H616_DX_ODT=0x0c0c0c0c +CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e +CONFIG_DRAM_SUN50I_H616_CA_DRI=0x0e0b +CONFIG_DRAM_SUN50I_H616_ODT_EN=0xffffeeee +# CONFIG_DRAM_SUN50I_H616_TPR0=0xc0001305 +CONFIG_DRAM_SUN50I_H616_TPR10=0x402f6663 +CONFIG_DRAM_SUN50I_H616_TPR11=0x31313031 +CONFIG_DRAM_SUN50I_H616_TPR12=0xd0d0c0e +CONFIG_MACH_SUN50I_H616=y +CONFIG_SUNXI_DRAM_H616_LPDDR4=y +# CONFIG_SUNXI_DRAM_H616_DDR3_1333=y +CONFIG_DRAM_CLK=696 I'm watching info on HDMI so sure HDMI works, asked for locales timezone, etc make root passwod and user.. ethernet network eth0 works, already connect to my lan, but Wifi error with dmesg error: brcmfac: brcmf_fw_alloc_request: Unknown chip BCM43342/1 brcmfac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 brcmfac: brcmf_ops_sdio_probe: F2 error, probe failed -19... not yet check my dts what wifi used, not yet try to copy to emmc too.. still happy with the result

Hi @Nick A just trying to update my status.. I already try to make my patch but I still cant figure it right :) so I try edit your config patch with LPDDR4 (guess its 2nd DRAM setup) .. then got error previously applied patch on Ethernet.patch so I just move the patch out and until now still building the images (6hours already) and still not finish yet but my friend's office closed soon so maybe the day after tomorrow I continue and test :) Then I just realized that I still include +CONFIG_DRAM_SUN50I_H616_TPR0=0xc0001305 that may be not needed.. later I try to fix and try again then

Hi @Nick A I manage extract dts using Android Image Kitchen, its named dtb. I already try to read using dtc -O dts dtb and found complete info about my hardware but still confuse with next move where to put setting or compiling uboot or image. Hope its using generic driver already have in armbian dtb

@Nick A thanks, I wrong thought I already passed DRAM problem, will try to provide the info soon when Im ready

Hi, I have Tx3 mini-A (seems tanix clone as I not found officially same spec) that have H616 chip. i already open and setting serial cable to see serial message, I try with vontar miniarch it say DRAM not supported. When I try normal boot serial screen show DRAM Type = 8 (LPDDR4) so I try with Orange Pi3 setup it can boot but seems stuck, I try with HDMI screen it show 3 penguin there. Still dont know next move, I include screen shoot on original android serial and on Orangepi3 miniarch. Sure want armbian can manage my box with wifi