Hi all,
after building several images for BananaPi and R1 with Igors lib and getting some insight to the great stuff he has done I have extended my "configuration.sh" with the following:
BPI-M2)#enabled
#description A31 quad core 1Gb SoC Wifi
#build 0
#--------------------------------------------------------------------------------------------------------------------------------
# Bananapi M2
#--------------------------------------------------------------------------------------------------------------------------------
REVISION="1.0"
BOOTLOADER="https://github.com/BPI-SINOVOIP/BPI-Mainline-uboot"
BOOTCONFIG="Bananapi_M2_defconfig"
BOOTSOURCE="u-boot-bpi-m2"
BOOTDEFAULT="master"
UBOOTTAG=""
MODULES="hci_uart gpio_sunxi rfcomm hidp sunxi-ir bonding spi_sun7i 8021q a20_tp"
MODULES_NEXT="brcmfmac"
LINUXFAMILY="banana"
;;
No other changes were made.
I successfully build images for trusty and jessie with mainline kernel (4.2.2).
Armbian is booting without issues as far as I can see.
I have tested ethernet and HDMI, both working, WLAN can be enabled and is up (only verified with "ifconfig", not connected to AP yet). "htop" shows all 4 cores. https://github.com/BPI-SINOVOIP/BPI-WiringPi can be build without issues and "gpio readall" shows all 40 pins. Further tests are ongoing as time permits.
Comments are welcome.