kocur

Members
  • Content Count

    4
  • Joined

  • Last visited

  1. I measured my psu and gives almost 5.3v on output and is stable during boot. Also tried before the "old" images and works well but without script.bin. When I copy script.bin to BOOT partition I have same issues as described in following page: http://www.orangepi.org/orangepibbsen/forum.php?mod=viewthread&tid=666 Now I am trying to compile armbian from sources with new commits after release and I let you know it will work.
  2. I connected my OPI PC to UART and got following error: U-Boot SPL 2016.09-armbian (Sep 15 2016 - 07:28:57) DRAM: 1024 MiB Trying to boot from MMC1 MMC: no card present spl: mmc init failed with error: -123 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### Maybe my OPI version is not compatibile with yours software? I've got Orange PI PC v.1.3
  3. Thank you for reply. I measured my official psu and it gives me 5.32v on output. I think it's enough for OPI. Also when I boot system from official OPI page its works well but without drivers (script.bin file). With script.bin it hanging on following log message: [ 4.270097] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=31. Of course I tested it with others psu: - official orginal samsung 5.3---2.0A - Xiaomi powerbank 5.1V---2A Still not works.
  4. I Installed the Armbian system who is dedicated for my OPI version: http://www.armbian.com/orange-pi-pc/ with instruction, formatted SD card with format size adjustment option ON. But when I want to boot it there is only still green light (steady all time). OPI not giving any boot information on screen. This issue is not caused by SD card becasue I tried two (which one is recommended): Kingston 32GB (class 10) and Samsung EVO+ 32GB. Has anyone had similar experience or have any idea how to solve this?