Jump to content

scargill

Members
  • Posts

    34
  • Joined

  • Last visited

Everything posted by scargill

  1. Not sure what's to get excited about with the R4S until we get Armbian so we can run OpenMediaVault on the board - or am I missing something. https://tech.scargill.net/friendlyarm-nanopi-r4s-sbc/
  2. including setup of serial port and i2c on that first armbian-config menu item??
  3. Hi Brand new (stretch) setup - armbian-config does not seem to want to change keyboard or allow hardware setup for i2c etc. I recall in the past using this board with Armian and having no issues. grabbed latest armbian-config update - that didnt improve things. Under system and wireless options in armbian-config - toggle hardware configuration is empty - ie nothing on left or right. Ideas anyone?
  4. scargill

    scargill

  5. I may be being thick but when I went here... https://www.armbian.com/orange-pi-plus-2e/ All I'm seeing is 2 large "legacy" buttons so I assumed that is all there is for this board.
  6. Sorry about the delay - sleep (UK) Linux plus2e 4.11.5-sun8i #11 SMP Fri Jun 23 20:03:23 CEST 2017 armv7l armv7l armv7l GNU/Linux
  7. Ok, I got it - all on one line... overlays=uart1 uart2 uart3 i2c0 i2c1 Even the unused UU has disappeared - and all is well.
  8. Groan... but now the serial doesn't work any more (write error despite permissions being fine)... I think altering the FEL file might've done that as the serial overlays are still there... permissions look ok too.
  9. HOWEVER Adding these following your earlier example overlays=i2c1 overlays=i2c0 Has moved an ugly UU entry to i2c1 - and my device now appears on i2c0 - - and..... the display WORKS - Wheeeeeeee. Thanks!
  10. [twi0_para] twi0_used = 1 twi0_scl = port:PB00<2><default><default><default> twi0_sda = port:PB01<2><default><default><default> Also one for twi1_para - and a twi_para - I set all 3 to 1 - recompiled - rebooted - no difference whatsoever... still - at least now i know how to manipulate that file... I don't think it has done anything though... the script.bin file has definitely been updated...
  11. Hi there - no it is not appearing - but usually I use I2c1 - and there you have hit my limit - I have NO idea how to use that FEX - indeed I found an editor in the config and now I can't find that - but no I have not enabled them in FEX - it would be nice to enable i2c1 - ????
  12. Erm I wonder if I can push my luck - the Serial is all working now... but when I come to look at I2c - (i2cdetect) only I2c 0 is there... and that appears to be pins 3 and 5 on the 40 way connector - but taking my SSD1306 display (I put them on all my boards with a little Python driver) - and plugging it in - nothing is showing on port 3c.... unusual... any thoughts?
  13. Thank you... Well I clicked on LEGACY for this board as that's the only one I could find on the Armbian site (Orange Pi Plus 2E) - please point me elsewhere if I picked the wrong one - however - your fixes worked. I had already had a go with the FEL editor - not having a clue what I was doing - simply setting the current 0 setting for the 3 serial ports to 1 - but that didn't work (it did result in a WHOLE boatload of serial ports however, appearing in DEV) But just adding in the setting you both provided - works a treat - all 3 ports work and I can forget about the debug port - though it really would be good to know how to turn that debug off on port 0 - utterly wasted for me, once I'm up and running.
  14. Hi Can someone help. I have the current "legacy" ubuntu for Orange Pi Plus 2E - installed this morning. Everything seems fine except - I cannot figure out how to enable the serial port ttyS0 for general use - the console keeps grabbing it - I tried altering the boot cmd from console=both to console=tty1 - and I recompiled that as per the instructions - no difference - I can see on boot up that it is setting up ttys0 for debugging - and when I try to enable and then use it in Node-Red - it works at first - then some debug info comes in - and Node-Red loses control of the serial port. Can anyone help - also - SURELY there is more than one serial port on this board? The connector suggests at least 3 - but only ttyS0 is showing up in /dev - ideas? (without recompiling the entire operating system)?
  15. Erm ho wants A64 for IOT? Don't underestimate people's ability to go further than you might imagine. I do a LOT of stuff with Node-Red and the Pi at times shows it's lack of power. I'm hoping the Odroid will prove to be better but simple benchmarks for that A64 unit suggest it will go further.
  16. Well, my A64 turned up today. There are no holes next to the fan - indeed I can't find a 2-way connector anywhere on the board...odd as they supplied a fan! I blindly thought that the Armbian for the Pin64 might work but with nothing to lose I tried it.... it doesn't do anything other than the little green indicator light - just a black screen. That leaves a stripped down operating system with god knows what's missing or Ubuntu mate, both off their site - as there is nothing on the DietPi site either. Oh well, I wouldn't care but their downloads are very slow - the 896meg file is going to take 8 hours.. Time for an early night I guess.
  17. For clarity - I have just created a new SD - this time using the legacy JESSIE. sudo ifconfig shows this... wlan0 Link encap:Ethernet HWaddr 98:a6:91:6c:5e:80 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 TX bytes:0 (0.0 After nmtui creation and seamless activation.. wlan0 Link encap:Ethernet HWaddr 98:a6:91:6c:5e:80 inet addr:192.168.0.158 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::9aa6:91ff:fe6c:5e80/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:87 errors:0 dropped:0 overruns:0 frame:0 TX packets:25 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10047 (9.8 KiB) TX bytes:4057 (3.9 KiB) Disconnect power - disconnect ETHERNET - reconnect power - wait...and wait..... Nothing. A quick system scan shows nothing... disconnect - back to ETHERNET... wlan0 Link encap:Ethernet HWaddr 98:a6:91:6c:5e:80 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 TX bytes:0 (0.0 sudo nmtui The WIFI is there - but needs activating - this time it wants a password!!?? Connection takes several seconds this time. wlan0 Link encap:Ethernet HWaddr 98:a6:91:6c:5e:80 inet addr:192.168.0.158 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::9aa6:91ff:fe6c:5e80/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:83 errors:0 dropped:0 overruns:0 frame:0 TX packets:17 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9099 (8.8 KiB) TX bytes:2956 (2.8 KiB) Clearly something there. I figured I'd try a reboot and leave the ETHERNET connected (last time was actual power off) Sudo reboot. No Ethernet (correct as WIFI should take precidence). Sure enough - WIFI working. Working but slow and stuttering - the very reason I went for the latest build in the first place (I'm 3ft from the access point in a small non-metal office). Power off - disconnect Ethernet - power on. This time it works - but slowly. At this point, from earlier advice from TKaiser - sudo h3consumption -w off Please be patient, external requirements are to be installed. Aborted fex2bin/bin2fex not found and unable to install. Exiting Aborted Writing script.bin went wrong. Nothing changed. Tried again - same thing. So - I tried the sudo armbianmonitor -u command.. ICMP Host Unreachable from 192.168.0.130 for ICMP Echo sent to sprunge.us (216.2 39.36.21) ICMP Host Unreachable from 192.168.0.130 for ICMP Echo sent to sprunge.us (216.2 39.36.21) ICMP Host Unreachable from 192.168.0.130 for ICMP Echo sent to sprunge.us (216.2 39.36.21) ICMP Host Unreachable from 192.168.0.130 for ICMP Echo sent to sprunge.us (216.2 39.36.21) Network/firewall problem detected. Please fix this or upload /var/log/armhwinfo. log manually. /var/log/armhwinfo.log has been uploaded to curl: (7) Failed to connect to sprun ge.us port 80: Network is unreachable gzip: /var/log/armhwinfo.log.1.gz: No such file or directory Please post the URL in the Armbian forum where you've been asked for. pi@orangepizero:~$ Before anyone says that sounds like a connection issue - that has been my constant complaint about earlier WIFI on the Pi Zero. pi@orangepizero:~$ ping www.bbc.co.uk PING www.bbc.net.uk (212.58.246.54) 56(84) bytes of data. From orangepizero (192.168.0.130) icmp_seq=1 Destination Host Unreachable From orangepizero (192.168.0.130) icmp_seq=2 Destination Host Unreachable From orangepizero (192.168.0.130) icmp_seq=3 Destination Host Unreachable Note that the first ping went through. I think it is fair to say that the hardware WORKS?
  18. No the original worked - just not that well (it might have been DietPi that worked - but one of them did - absolutely)
  19. IWCONFIG says: eth0 no wireless extensions lo nowireless extensions.. Thewireless network I put into nmtui is there - but nothing when you go to activate - just nothing there at all in the menu to activate.
  20. Hi there The "firmware" subfolder did not exist at all - so I created it and put those files in. I then rebooted the board. I deleted the WIFI connection and recreated it. Still nothing - no Activate. I tried sudo modprobe and then nmtui again - no difference. I tried iwlist wlan0 scan - still - wlan0 interface doesn't support scanning. Here is the latest log output - http://sprunge.us/YFJF Somewhat different message now xradio_wlan: unknown parameter 'macaddr' ignored Anything I've missed?
  21. The info above was from a completely clean install from the nightly build.. only changed the root password and created (forced to create) a new user - nothing else - this was all done on ETHERNET.
  22. As per request - the log is here... http://sprunge.us/VWZB This line stood out from the crowd... xradio_wlan mmc1:0001:1: Direct firmware load for xr819/sdd_xr819.bin failed with error -2 As did these later on [ 12.031511] xradio_wlan mmc1:0001:1: Direct firmware load for xr819/sdd_xr819.bin failed with error -2 [ 12.031532] xradio_wlan mmc1:0001:1: Falling back to user helper Standing out is one thing of course - I've no idea what to do about it.
  23. I've been experimenting and getting no-where - so to be safe I'll reload the operating system then send the logs. .(zador.blood.stained - I had no idea about this logging -not everyone has the same level of knowledge of Armbian)
  24. Hi there iwlist wlan0 scan wlan0 Interface doesn't support scanning What version operating system and release did you use? I used the latest nightly build as an earlier version was unreliable (but actually worked)
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines