olivier-b

If that can help, I found the same error message ( spl: mmc init failed with error: -123 ) in the attached file (log1.txt) in this thread : http://forum.armbian.com/index.php/topic/1945-orange-pi-plus-2e/?p=15020 I remove linux-u-boot-orangepiplus-default package and upgrade. Now I can boot : Thank you very much Now I have two sdcard so if you want help to test new image, no problem, feel free to ask me

Same problem with a NEW Samsung EVO microSDHC UHS-I (48MB/s) and Armbian_5.20_Orangepiplus_Debian_jessie_3.4.112.img image : U-Boot SPL 2016.09-armbian (Sep 15 2016 - 07:58:09) DRAM: 1024 MiB Trying to boot from MMC1 MMC: no card present spl: mmc init failed with error: -123 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ###

to test, I will buy a 10 class and u1 sdcard.

I put the Armbian_5.20_Orangepiplus_Debian_jessie_3.4.112.img image on the card and I have the same problem I remember that in April after installing version 5.10, I had already done an apt-get upgrade (5.16 I think) and I couldn't boot either. A this time, I had to put back to V5.10 img without any upgrade possible. I thought that was version that was bugged. I remember too that after, none of the official xunlong image, wouldn't boot on my card (except the android on MMC memory).

I use the card sold by xunlong (8GB classe 10 Micro SD HC I without brand red and grey)

Here is the console messages when I boot with the sdcard v5.20 : I restored my backup image (v5.10), here is the serial console messages :

Thank you for your answers Goldfish_paris : Thank you for the advice, if I can't find the solution I will try it. Before I'd like to understand why upgrade doesn't work. Igor : I don't try serial console. I just received, from mail, a USB-TTL module (an xcsource usb to ttl ch340g 3.3v and 5v) to connect my esp8266 modules (I have Arduino UNO too if needed). I will test this week-end to connect it to my orangepi+ To connect it, I guess I have to use minicom. These documents are they OK ? TTL speed and serial parameter ? --> http://www.orangepi.org/Docs/LogintotheOrangePi.html#Using_TTL_serial_port UART location on orangepi+ ? --> http://linux-sunxi.org/File:Xunlong_Orange_Pi_Plus_uart.jpg UART documentation ? --> http://linux-sunxi.org/UART

Hi, I'm Olivier, french engineer, and i have bought an orangepi plus card in april. I use linux (x86) since 1994 Sorry for my bad english ... I was happy to find Armbian because linux images provided by xunlong have many security problems (example / and all system directory aren't owned by root but by orangepi user). Thank for your work on Armbian. My Orangepi + has been installed with a 5.10 armbian image (Armbian_5.10_Orangepiplus_Debian_jessie_3.4.112) and run perfectly. I wanted upgrade to 5.20 and since the card doesn't boot anymore. I can boot with the native android on NAND memory but I can't boot on SDcard. When I boot on sdcard, only green led is on (not red led) and I don't have any display on my HDMI screen. I can restore my sdcard image back up with v5.10 and boot again, the card is OK for me. I followed the upgrade documentation to pass from v5.10 to v5.20 : apt-get update apt-get upgrade apt-get install -f apt-get upgrade apt-get autoremove -y and i had an error message during first apt-get upgrade : /boot/initrd.img-3.4.112-sun8i does not exist. Cannot update. I can mount the sdcard on my linux box (an archlinux) and list directories without problem : on my sdcard image backup (v5.10), in /boot I have : Any idea ? here is the all message of upgrade process :