atula
-
Posts
46 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by atula
-
-
tested and works rkspi_loader-v20.11.2-trunk-v2.img
Kingston A2000 M.2 2280 PCIe NVMe
Gigabyte SSD M.2 2280 PCIe x2 Model:GP-GSM2NE8128GNTDKingston 240GB A1000 SSD = PHISON PS5008-E8-10
Samsung 250GB 970 EVO Plus SSD-levy, M.2 2280, PCIe 3.0 x4, NVMe, 3500/2300 MB/s
Intel SSD 660p Model:SSDPEKNW512GB
PNY 250GB XLR8 CS3030 M.2 NVMe SSD PCIe Gen3 x45.9.11
also old 4.4.213 boot from spi
-
Thank you for very nice work!
~# dd if=rkspi_loader-v20.11.2-trunk-v2.img of=/dev/mtdblock0 bs=4K
1016+0 records in
1016+0 records out
4161536 bytes (4.2 MB, 4.0 MiB) copied, 67.6658 s, 61.5 kB/s
Armbian 20.11.1 Buster ttyS2rockpi-4a login:
U-Boot TPL 2020.07-armbian (Dec 04 2020 - 22:10:39)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...U-Boot SPL 2020.07-armbian (Dec 04 2020 - 22:10:39 +0100)
Trying to boot from SPI
NOTICE: BL31: v1.3(debug):42583b6
NOTICE: BL31: Built : 07:55:13, Oct 15 2019
NOTICE: BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: If lpddr4 need support multi frequency,
INFO: please update loader!
INFO: Current ctl index[0] freq=400MHz
INFO: Current ctl index[1] freq=800MHz
INFO: plat_rockchip_pmu_init(1190): pd status 3e
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2020.07-armbian (Dec 04 2020 - 22:10:39 +0100)SoC: Rockchip rk3399
Reset cause: POR
Model: Radxa ROCK Pi 4B
DRAM: 3.9 GiB
PMIC: RK808
MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from SPI Flash... SF: Detected w25q64cv with page size 256 Bytes, erase size 4 KiB, total 8 MiB
*** Warning - bad CRC, using default environmentIn: serial
Out: serial
Err: serial
Model: Radxa ROCK Pi 4B
Net: eth0: ethernet@fe300000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3185 bytes read in 6 ms (517.6 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 1
251 bytes read in 4 ms (60.5 KiB/s)
13478362 bytes read in 574 ms (22.4 MiB/s)
27574784 bytes read in 1169 ms (22.5 MiB/s)
74167 bytes read in 12 ms (5.9 MiB/s)
1314 bytes read in 10 ms (127.9 KiB/s)
Applying kernel provided DT overlay rockchip-spi-jedec-nor.dtbo
2698 bytes read in 10 ms (262.7 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
## Loading init Ramdisk from Legacy Image at 06000000 ...
Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
Data Size: 13478298 Bytes = 12.9 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Ramdisk to f1237000, end f1f1199a ... OK
Loading Device Tree to 00000000f11bc000, end 00000000f1236fff ... OKStarting kernel ...
-
something väärin järjestelmissäni
root @ rockpi-4a: / boot # dd if = rkspi_loader-v20.11.2-trunk.img / = dev / mtdblock0 bs = 4K
1016 + 0 tietuetta
1016: ssa + 0 tietuetta
kopioitu 4161536 tavua (4,2 Mt, 4,0 Mt) , 70,186 s, 59,3 kB / sU-Boot SPL 2020.07-armbian (03.12.2020 - 21:19:03 +0100)
Käynnistysyritys MMC1-
kortilta ei vastannut jännitteen valintaan!
spl: mmc init epäonnistui virheellä: -95
Käynnistäminen MMC2-
kortilta ei vastannut jännitteen valintaan!
spl: mmc init epäonnistui virheellä: -95
SPL: käynnistys epäonnistui kaikilta käynnistyslaitteilta
### ERROR ### PALAUTA taulu ### -
-
-
Rockpi 4A v1.4
Armbian 20.11.1 Buster with Linux 5.9.11-rockchip64
Winbond 25Q64FVSIG...1516
-
U-Boot TPL 2020.07-armbian (Nov 30 2020 - 18:39:44)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...U-Boot SPL 2020.07-armbian (Nov 30 2020 - 18:39:44 +0100)
Trying to boot from MMC1
NOTICE: BL31: v1.3(debug):42583b6
NOTICE: BL31: Built : 07:55:13, Oct 15 2019
NOTICE: BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: If lpddr4 need support multi frequency,
INFO: please update loader!
INFO: Current ctl index[0] freq=400MHz
INFO: Current ctl index[1] freq=800MHz
INFO: plat_rockchip_pmu_init(1190): pd status 3e
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2020.07-armbian (Nov 30 2020 - 18:39:44 +0100)SoC: Rockchip rk3399
Reset cause: POR
Model: Radxa ROCK Pi 4B
DRAM: 3.9 GiB
PMIC: RK808
MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from SPI Flash... unrecognized JEDEC id bytes: ef, 40, 17
*** Warning - spi_flash_probe_bus_cs() failed, using default environmentIn: serial
Out: serial
Err: serial
Model: Radxa ROCK Pi 4B
Net: eth0: ethernet@fe300000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3185 bytes read in 6 ms (517.6 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 1
251 bytes read in 4 ms (60.5 KiB/s)
13480044 bytes read in 579 ms (22.2 MiB/s)
27574784 bytes read in 1173 ms (22.4 MiB/s)
74167 bytes read in 12 ms (5.9 MiB/s)
1314 bytes read in 8 ms (160.2 KiB/s)
Applying kernel provided DT overlay rockchip-spi-jedec-nor.dtbo
2698 bytes read in 8 ms (329.1 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
## Loading init Ramdisk from Legacy Image at 06000000 ...
Image Name: uInitrd
Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
Data Size: 13479980 Bytes = 12.9 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Ramdisk to f1237000, end f1f1202c ... OK
Loading Device Tree to 00000000f11bc000, end 00000000f1236fff ... OKStarting kernel ...
-
U-Boot SPL 2020.07-armbian (Nov 30 2020 - 18:39:44 +0100) Trying to boot from MMC1 Card did not respond to voltage select! spl: mmc init failed with error: -95 Trying to boot from MMC2 Card did not respond to voltage select! spl: mmc init failed with error: -95 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ###i try with 7 nvme, also sdcard not boot
-
Tested Rockpi4a v1.4 SPI U-Boot 2017.09-2686-g18c70dba63 (Dec 31 2019 - 12:33:07 +0000), Build: jenkins-linux-build-testing-2-136
this works, only flash img to nvme, do nothing armbianEnv.txt or boot.cmd, no sdcard
Intel 660p
Armbian_20.02.1_Rockpi-4a_buster_legacy_4.4.213.img
.......................
Hit key to stop autoboot('CTRL+C'): 0Device 0: RKPARM: Invalid parameter part table
Vendor: 0x8086 Rev: 002C Prod: BTNH90820C73512A
Type: Hard Disk
Capacity: 488386.3 MB = 476.9 GB (1000215216 x 512)
... is now current device
Scanning nvme 0:1...
Found U-Boot script /boot/boot.scr
2940 bytes read in 5 ms (574.2 KiB/s)
## Executing script at 00500000
Boot script loaded from nvme 0
189 bytes read in 6 ms (30.3 KiB/s)
6758686 bytes read in 67 ms (96.2 MiB/s)
19752968 bytes read in 171 ms (110.2 MiB/s)
93124 bytes read in 23 ms (3.9 MiB/s)
** File not found /boot/dtb/rockchip/overlay/rockchip-fixup.scr **
.............................Kingston 2000 and Gigabyte
this works, armbianEnv.txt add fdtfile=rockchip/rk3399-rock-pi-4.dtb
Armbian_20.02.7_Rockpi-4a_buster_current_5.4.28.img
.................
Hit key to stop autoboot('CTRL+C'): 0Device 0: RKPARM: Invalid parameter part table
Vendor: 0x2646 Rev: S5Z42102 Prod: 50026B72823F1B89
Type: Hard Disk
Capacity: 238475.1 MB = 232.8 GB (488397168 x 512)
... is now current device
Scanning nvme 0:1...
Found U-Boot script /boot/boot.scr
2940 bytes read in 4 ms (717.8 KiB/s)
## Executing script at 00500000
Boot script loaded from nvme 0
189 bytes read in 4 ms (45.9 KiB/s)
7287636 bytes read in 69 ms (100.7 MiB/s)
20787712 bytes read in 184 ms (107.7 MiB/s)
72736 bytes read in 11 ms (6.3 MiB/s)
2698 bytes read in 6 ms (438.5 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)................................................................................
These NVME not works, tested , many scripts, there is errors
kingston A1000
Armbian_20.02.7_Rockpi-4a_buster_current_5.4.28.img
.................
Hit key to stop autoboot('CTRL+C'): 0Device 0: RKPARM: Invalid parameter part table
Vendor: 0x2646 Rev: E8FK11.R Prod: 50026B76826C0418
Type: Hard Disk
Capacity: 228936.5 MB = 223.5 GB (468862128 x 512)
... is now current device
Scanning nvme 0:1...
Found U-Boot script /boot/boot.scr
2985 bytes read in 7 ms (416 KiB/s)
## Executing script at 00500000
Boot script loaded from nvme 0
189 bytes read in 5 ms (36.1 KiB/s)
ERROR: status = 13, phase = 1, head = 1
** fs_devread read error - block
ERROR: status = 13, phase = 0, head = 1
** fs_devread read error - block
72736 bytes read in 22 ms (3.2 MiB/s)
2698 bytes read in 10 ms (262.7 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
................PNY CS3030 250GB
.........................
Armbian_20.02.7_Rockpi-4a_buster_current_5.4.28.img
....................
Hit key to stop autoboot('CTRL+C'): 0Device 0: RKPARM: Invalid parameter part table
Vendor: 0x1987 Rev: CS303224 Prod: PNY35190025670102900
Type: Hard Disk
Capacity: 238475.1 MB = 232.8 GB (488397168 x 512)
... is now current device
Scanning nvme 0:1...
Found U-Boot script /boot/boot.scr
2940 bytes read in 6 ms (478.5 KiB/s)
## Executing script at 00500000
Boot script loaded from nvme 0
189 bytes read in 5 ms (36.1 KiB/s)
ERROR: status = 2013, phase = 1, head = 1
** fs_devread read error - block
ERROR: status = 2013, phase = 0, head = 1
** fs_devread read error - block
72736 bytes read in 13 ms (5.3 MiB/s)
2698 bytes read in 11 ms (239.3 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
...............................
Samsung 970 EVOPlus
Armbian_20.02.7_Rockpi-4a_buster_current_5.4.28.img
....................
Hit key to stop autoboot('CTRL+C'): 0Device 0: RKPARM: Invalid parameter part table
Vendor: 0x144d Rev: 1B2QEXM7 Prod: S4EUNG0M122756V
Type: Hard Disk
Capacity: 238475.1 MB = 232.8 GB (488397168 x 512)
... is now current device
Scanning nvme 0:1...
Found U-Boot script /boot/boot.scr
2940 bytes read in 5 ms (574.2 KiB/s)
## Executing script at 00500000
Boot script loaded from nvme 0
189 bytes read in 3 ms (61.5 KiB/s)
ERROR: status = 2013, phase = 1, head = 1
** fs_devread read error - block
ERROR: status = 2013, phase = 0, head = 1
** fs_devread read error - block
72736 bytes read in 15 ms (4.6 MiB/s)
2698 bytes read in 7 ms (376 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
................................. -
also
PNY 250GB XLR8 CS3030 M.2 NVMe SSD-levy, PCIe Gen3 x4, 3500/1050 (Hynix)
not start SPI
works well with SDcard with Armbian
-
can do many ways, here's one
- first flash spi u-boot https://forum.radxa.com/t/spi-nvme-booting-beta/1306
- flash Armbian img DL https://dl.armbian.com/rockpi-4b/archive/ and extracxt http://www.7-zip.org/ and flash it to sdcard https://www.etcher.io/
- connect pin 23 and 25 together, put sdcard to rocpi , root, passwd 1234
- apt update
- apt upgrade
- wget https://dl.armbian.com/rockpi-4b/archive/Armbian_19.11.3_Rockpi-4b_buster_legacy_4.4.198.7z
- 7z e armbian.com/rockpi-4b/archive/Armbian_19.11.3_Rockpi-4b_buster_legacy_4.4.198.7z
- dd if=Armbian_19.11.3_Rockpi-4b_buster_legacy_4.4.198.img of=/dev/nvme0n1 bs=1M
- e2fsck -f /dev/nvme0n1p1
reboot, wait 2-3 sek. and remove SDcard, when red led light
again in "root" and passwd "1234".................
- apt update
- apt upgrade
- nano /boot/armbianEnv.txt
- add "fdtfile=rockchip/rk3399-rockpi4b.dtb" if 4.4.198, if 5.x.x , add "fdtfile=rockchip/rk3399-rock-pi-4.dtb"
ctrl + x .....y
- remove connect pins 23, 25,
- remove SDcard
- reboot
sorry my bad english
what brand of nvme you have?
-
something new has come, great
Armbian_19.11.3_Rockpi-4b_buster_current_5.3.11.img and radxa official SPI 4b u-boot,
Kingston A2000 M.2 2280 PCIe NVMe
Gigabyte SSD M.2 2280 PCIe x2 Model:GP-GSM2NE8128GNTD
XPG GAMMIX S5 PCIe Gen3x4 M.2 2280 512Kingston 240GB A1000 SSD = PHISON PS5008-E8-10Samsung 250GB 970 EVO Plus SSD-levy, M.2 2280, PCIe 3.0 x4, NVMe, 3500/2300 MB/s
Intel SSD 660p Model:SSDPEKNW512GBboot with nvme without uSD and mmc
-
4A V1.4model not boot SPI with ..4a.......4.4.198....img,
....4b.....img and ...4b-u-boot....works well
all of them works fine with SDcard
tested Kinston A2000 nvme (not work Raxda official)
-
Yes, NEW Linux rockpi 4.4.198-rockchip64 boot fine SPI without SDcard
(Kingston A2000 NVME), also Gigabyte SSD M.2 2280 PCIe x2
-
-
try
/etc/udev/rules.d/99-tty-dialout.rules
SUBSYSTEM=="tty", KERNEL=="ttyUSB0", GROUP="dialout", MODE="0666"
or/etc/udev/rules.d/99-instruments.rules //new file
SUBSYSTEM=="tty", GROUP="dialout", MODE="0666"or like my i2c
/lib/udev/rules.d/60-i2c-tools.rules
SUBSYSTEM=="i2c-dev",KERNEL=="i2c-[0-9]*", GROUP="i2c", MODE="0660" //replace "0666" -
I tried this
https://github.com/ayufan-rock64/linux-build/blob/master/recipes/flash-spi.md
not boot without sdcard
edit
i haw tested 4 nwme, only one of them boot (Radxa official) SPI, Armbian doesn't recognize this disc ,
3 Armbian buster SD boot
-
Debian Buster with Armbian Linux 4.4.184-rockchip64
Kingston 240GB A1000 SSD,
Samsung 250GB 970 EVO Plus SSD-levy, M.2 2280, PCIe 3.0 x4, NVMe, 3500/2300 MB/s,
XPG GAMMIX S5 PCIe Gen3x4 M.2 2280 512 works
not support Intel 512GB 660P 1500/1000 MB/s -SSD- M.2, not find it
linaro-alip 4.4.154 works and boot Intel 512GB 660P 1500/1000 MB/s -SSD- M.2 from spi
XPG GAMMIX S5 PCIe Gen3x4 M.2 2280 512 boot also spi but not stabile
Samsung 250GB 970 EVO Plus SSD-, M.2 2280, PCIe 3.0 x4, NVMe, 3500/2300 MB/s,
Kingston 240GB A1000 SSD
not boot spi
-
can anyone help me how to use uart2 PB0,PB1 and uart3 PG10,PG11
uart0 works PB9, PB10
all serialpots is enabled in xxx.dtb "okay" but not work
edit:
all uarts works now
-
w1 works Armbian_5.83_Bananapim3_Debian_stretch_next_4.19.38.img
@nkahl
onewire@0 {
compatible = "w1-gpio";
gpios = <&pio 4 4 0>; /* PE4 */
status = "okay"; };
-
-
Debian Buster with Armbian Linux 4.4.184-rockchip64
dev/ttyS2 , dev/ttyS4 not works, only read
dev /ttyUSB0 woks fine
root@rockpi:~# digitemp_DS9097U -i -s /dev/ttyS4 -c digitemp.conf
DigiTemp v3.7.2 Copyright 1996-2018 by Brian C. Lane
GNU General Public License v2.0 - http://www.digitemp.com
Error 5: DS2480B Adapter Not Detected
Error 10: Read COM Failed
root@rockpi:~# digitemp_DS9097U -i -s /dev/ttyUSB0 -c digitemp.conf
DigiTemp v3.7.2 Copyright 1996-2018 by Brian C. Lane
GNU General Public License v2.0 - http://www.digitemp.com
Turning off all DS2409 Couplers
.
Searching the 1-Wire LAN
28208071030000A0 : DS18B20 Temperature Sensor
ROM #0 : 28208071030000A0owfs works i2c adapter but not serial DS2480B, digitemp also.......maybe old systems
passive readers works both ...ttyS2 and ....ttyS4
and onewire works also now
-
moved
-
Booting ROCK Pi 4(A/B/C) with mainline u-boot in SPI, NVMe and Armbian v20.11.x
in Rockchip
Posted · Edited by TRS-80
put moderate length output inside code block inside spoiler
And USB stick
Device 0: unknown device starting USB... Bus usb@fe380000: USB EHCI 1.00 Bus usb@fe3c0000: USB EHCI 1.00 Bus dwc3: usb maximum-speed not found Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.10 scanning bus usb@fe380000 for devices... 1 USB Device(s) found scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found scanning bus dwc3 for devices... 2 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Device 0: Vendor: Mass Rev: 1.00 Prod: Storage Device Type: Removable Hard Disk Capacity: 30436.5 MB = 29.7 GB (62333952 x 512) ... is now current device Scanning usb 0:1... Found U-Boot script /boot/boot.scr 3185 bytes read in 4 ms (777.3 KiB/s) ## Executing script at 00500000 Boot script loaded from usb 0 251 bytes read in 5 ms (48.8 KiB/s) 13478362 bytes read in 717 ms (17.9 MiB/s) 27574784 bytes read in 1457 ms (18 MiB/s) 74167 bytes read in 13 ms (5.4 MiB/s) 1314 bytes read in 9 ms (142.6 KiB/s) Applying kernel provided DT overlay rockchip-spi-jedec-nor.dtbo 2698 bytes read in 10 ms (262.7 KiB/s) Applying kernel provided DT fixup script (rockchip-fixup.scr) ## Executing script at 09000000 ## Loading init Ramdisk from Legacy Image at 06000000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 13478298 Bytes = 12.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Loading Ramdisk to f1237000, end f1f1199a ... OK Loading Device Tree to 00000000f11bc000, end 00000000f1236fff ... OK Starting kernel ... Armbian 20.11.1 Buster ttyS2 rockpi-4a login:its all what need.....SPI.....