ahl

Thank you, Igor, that fixed it! eMMC is now accessible:

@tkaiser: Thank you for the hint. boot.cmd now reads as follows. I compiled it via mkimage. The device is still recognized as SolidRun Cubox-i Dual/Quad. Parts of the boot log: mmc0 = SD card functional. mmc1 = eMMC (?) shows up in the log but not availabe under /dev/disks @Igor: I will report the issue in the SR forum.

Dear all, I'm just trying to get a HummingBoard-Edge (i.MX6 Quad, 2GB) working with Armbian_5.20_Cubox-i_Ubuntu_xenial_4.7.3. Unfortunately, the board is recognized as CuBox-i, U-Boot loads the wrong dtb file (imx6q-cubox-i.dtb) and I have no access to the internal eMMC card (mmcblk1). By the way, it's the same issue with ArchLinuxArm. Do I have to somehow modify the U-Boot environment variables to get the board being recognized as Hummingoard2? Do you have any other ideas? Thank you very much for your help! Best regards Andreas