kokosz887

I have an ASUS RT-AC57U router and a USB drive is connected to it. I would like to use my X96 MINI to copy some files from this drive. I turned on SAMBA (in armbian config) in the ARMBIAN settings. On the monitor in the device manager, under the address 192.168.1.1, I can see all the folders created on the router's disk. Unfortunately, when I try to connect to the terminal, nothing works. When I use smbclient, it says "command not found". In addition, I also tried the commands: smbclient //192.168.1.1/folder/ --user user% pass sudo mount -t cifs -o username = user, password = pass //192.168.1.1/folder/ / media / share / open 'smb: //192.168.1.1/folder/' But nothing works. Does anyone know if something can be done about it?

I was able to install ARMBIAN. I named the file uboot.ext which was a mistake as it should be u-boot.ext. After this change, everything was installed.

Hello I have a TV BOX X96 MINI (S905W 2/16GB). I prepared the SD card thanks to the image: Armbian_20.10_Arm-64_focal_current_5.9.0_desktop.img.xz and also: - changed the name of the corresponding u-boot-s905x-s912 file to uboot.ext - I edited the extlinux.conf file, below is an excerpt about the S905W processor: # aml s9xxx FDT /dtb/amlogic/meson-gxl-s905w-p281.dtb #FDT /dtb/amlogic/meson-gxl-s905x-p212.dtb #FDT /dtb/amlogic/meson-gxm-q200.dtb #FDT /dtb/amlogic/meson-g12a-x96-max.dtb #FDT /dtb/amlogic/meson-g12b-odroid-n2.dtb APPEND root = LABEL = ROOTFS rootflags = data = writeback rw console = ttyAML0,115200n8 console = tty0 no_console_suspend consoleblank = 0 fsck.fix = yes fsck.repair = yes net.ifnames = 0 Unfortunately, when I try to launch ARMBIAN with a toothpick, the screen shown in the picture below appears. Then after a while the signal disappears and nothing happens. After reboot, the same happens from the beginning. I even replaced the .dtb file with the one from the thread below, but that didn't help either. Can someone please help me?