gepeto

I have a nanopiM1 and the CAM500B I have to make modification in script.bin , my nanopim1.fex part : # [csi0] vip_used = 1 vip_mode = 0 vip_dev_qty = 1 vip_define_sensor_list = 0 vip_csi_pck = port:PE00<2><default><default><default> vip_csi_mck = port:PE01<2><default><default><default> vip_csi_hsync = port:PE02<2><default><default><default> vip_csi_vsync = port:PE03<2><default><default><default> vip_csi_d0 = port:PE04<2><default><default><default> vip_csi_d1 = port:PE05<2><default><default><default> vip_csi_d2 = port:PE06<2><default><default><default> vip_csi_d3 = port:PE07<2><default><default><default> vip_csi_d4 = port:PE08<2><default><default><default> vip_csi_d5 = port:PE09<2><default><default><default> vip_csi_d6 = port:PE10<2><default><default><default> vip_csi_d7 = port:PE11<2><default><default><default> vip_csi_sck = port:PE12<2><default><default><default> vip_csi_sda = port:PE13<2><default><default><default> vip_dev0_mname = "ov5640" vip_dev0_pos = "rear" vip_dev0_lane = 2 vip_dev0_twi_id = 2 vip_dev0_twi_addr = 0x78 vip_dev0_isp_used = 0 vip_dev0_fmt = 0 vip_dev0_stby_mode = 0 vip_dev0_vflip = 0 vip_dev0_hflip = 0 vip_dev0_iovdd = "" vip_dev0_iovdd_vol = 2800000 vip_dev0_avdd = "" vip_dev0_avdd_vol = 2800000 vip_dev0_dvdd = "" vip_dev0_dvdd_vol = 1500000 vip_dev0_afvdd = "" vip_dev0_afvdd_vol = vip_dev0_power_en = vip_dev0_reset = port:PE14<1><default><default><default> vip_dev0_pwdn = port:PE15<1><default><default><default> vip_dev0_flash_en = vip_dev0_flash_mode = vip_dev0_af_pwdn = vip_dev0_act_used = 0 vip_dev0_act_name = "ad5820_act" vip_dev0_act_slave = 0x18 #FIN camera then after fex2bin nanopim1.fex script.bin and a reboot, I have a /dev/video0 device so i take https://github.com/avafinger/guvcview code and after compilation i have a good image with guvcview :-) I noticed that xawtv doesn't work

in fact , it run :-) my dnsmasq.conf and network/interfaces was wrong then after all ( may be the apt-get update/upgrade are also important ) with driver=nl80211 it's ok I have a captiv portal with nginx/php/dokuwiki to share information, data, etc where i want for 12$ .. cool I 'll put documentation for that next week

For me , after compiling hostapd with go.sh ( note ; add pkg-config into dependances and i'm not sure that the deb was made , i made a copie hostapd* by hands) it's the same hostapd run with wlan5 , it began to talk and crash the machine just before dnsmasq i have an extern power for a usb hub and make tests with 3 differents usb WIFI i notice that for me driver=rtl871xdrv make an error