[OV5640 camera with Orange Pi]

I have  a nanopiM1 and the CAM500B

I have to make modification in script.bin , my nanopim1.fex part :

#
[csi0]
vip_used = 1
vip_mode = 0
vip_dev_qty = 1
vip_define_sensor_list = 0
vip_csi_pck = port:PE00<2><default><default><default>
vip_csi_mck = port:PE01<2><default><default><default>
vip_csi_hsync = port:PE02<2><default><default><default>
vip_csi_vsync = port:PE03<2><default><default><default>
vip_csi_d0 = port:PE04<2><default><default><default>
vip_csi_d1 = port:PE05<2><default><default><default>
vip_csi_d2 = port:PE06<2><default><default><default>
vip_csi_d3 = port:PE07<2><default><default><default>
vip_csi_d4 = port:PE08<2><default><default><default>
vip_csi_d5 = port:PE09<2><default><default><default>
vip_csi_d6 = port:PE10<2><default><default><default>
vip_csi_d7 = port:PE11<2><default><default><default>
vip_csi_sck = port:PE12<2><default><default><default>
vip_csi_sda = port:PE13<2><default><default><default>

vip_dev0_mname           = "ov5640"
vip_dev0_pos             = "rear"
vip_dev0_lane            = 2
vip_dev0_twi_id          = 2
vip_dev0_twi_addr        = 0x78
vip_dev0_isp_used        = 0
vip_dev0_fmt             = 0
vip_dev0_stby_mode       = 0
vip_dev0_vflip           = 0
vip_dev0_hflip           = 0
vip_dev0_iovdd           = ""
vip_dev0_iovdd_vol       = 2800000
vip_dev0_avdd            = ""
vip_dev0_avdd_vol        = 2800000
vip_dev0_dvdd            = ""
vip_dev0_dvdd_vol        = 1500000
vip_dev0_afvdd           = ""
vip_dev0_afvdd_vol       =
vip_dev0_power_en        =
vip_dev0_reset           = port:PE14<1><default><default><default>
vip_dev0_pwdn            = port:PE15<1><default><default><default>
vip_dev0_flash_en        =
vip_dev0_flash_mode      =
vip_dev0_af_pwdn         =

vip_dev0_act_used        = 0
vip_dev0_act_name        = "ad5820_act"
vip_dev0_act_slave       = 0x18
#FIN camera

then after fex2bin nanopim1.fex script.bin and a reboot, I have a /dev/video0 device

so i take https://github.com/avafinger/guvcview code

and after compilation i have a good image with guvcview :-)

I noticed that xawtv doesn't work

[Nanopi-neo, kernel: 3.4.112-sun8i, hostapd wont start]

in fact , it run :-)

my dnsmasq.conf and network/interfaces was wrong

then after all ( may be the apt-get update/upgrade are also important ) with driver=nl80211 it's ok

I have a captiv portal with nginx/php/dokuwiki to share information, data, etc   where i want  for 12$ .. cool

I 'll put documentation for that next week

[Nanopi-neo, kernel: 3.4.112-sun8i, hostapd wont start]

For me , after compiling hostapd with go.sh

( note ; add pkg-config into dependances and i'm not sure that the deb was made , i made a copie hostapd* by hands)

it's the same

hostapd run with wlan5 , it began to talk and crash the machine just before dnsmasq

i have an extern power for a usb hub and make tests with 3 differents usb WIFI

 

i notice that for me driver=rtl871xdrv make an error