AVD

Wow! It works! Thanks! And instruction is good, so it worked on the first try.

Just downloaded armbian, but there is no wlan0. Looks like there is some mess with driver versions... Am I rigth? Can you update img file? Or I shell compile it by myself? > ifconfig bond0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 UP BROADCAST MASTER MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 TX bytes:0 (0.0 eth0 Link encap:Ethernet HWaddr 02:07:07:43:22:60 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 TX bytes:0 (0.0 Interrupt:87 Base address:0xc000 eth1 Link encap:Ethernet HWaddr 02:07:07:43:22:60 inet6 addr: fe80::7:7ff:fe43:2260/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 TX bytes:600 (600.0 Interrupt:117 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 TX bytes:0 (0.0 > dmesg | grep 8192 [ 0.000000] PERCPU: Embedded 8 pages/cpu @d0808000 s8256 r8192 d16320 u32768 [ 0.000000] pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096 [ 9.692020] 8192cu: disagrees about version of symbol module_layout > modprobe -v 8192cu insmod /lib/modules/3.4.112-sun7i/kernel/net/wireless/8192cu.ko modprobe: ERROR: could not insert '8192cu': Exec format error >dmesg [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.112-sun7i (root@xenial) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.1) ) #5 SMP PREEMPT Wed Sep 14 19:41:56 CEST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: sun7i [ 0.000000] Memory Reserved: [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB) [ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB) [ 0.000000] G2D : 0x49000000 - 0x49ffffff ( 16 MB) [ 0.000000] LCD : 0x4a000000 - 0x4bffffff ( 32 MB) [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected. [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c0a89440, node_mem_map d0000000 [ 0.000000] DMA zone: 512 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 65024 pages, LIFO batch:15 [ 0.000000] Normal zone: 1008 pages used for memmap [ 0.000000] Normal zone: 128016 pages, LIFO batch:31 [ 0.000000] HighMem zone: 528 pages used for memmap [ 0.000000] HighMem zone: 67056 pages, LIFO batch:15 [ 0.000000] PERCPU: Embedded 8 pages/cpu @d0808000 s8256 r8192 d16320 u32768 [ 0.000000] pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 cgroup_enable=memory swapaccount=1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 2097152 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 1024MB = 1024MB total [ 0.000000] Memory: 890044k/890044k available, 158532k reserved, 270336K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc09dfe90 (10080 kB) [ 0.000000] .init : 0xc09e0000 - 0xc0a18040 ( 225 kB) [ 0.000000] .data : 0xc0a1a000 - 0xc0a91d68 ( 480 kB) [ 0.000000] .bss : 0xc0a91d8c - 0xc0c66f78 (1877 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:192 [ 0.000000] Architected local timer running at 24.00MHz. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] start_kernel(): bug: interrupts were enabled early [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty1] enabled [ 0.013301] Calibrating delay loop... 1816.98 BogoMIPS (lpj=9084928) [ 0.076003] pid_max: default: 32768 minimum: 301 [ 0.079658] Mount-cache hash table entries: 512 [ 0.083857] Initializing cgroup subsys cpuacct [ 0.087176] Initializing cgroup subsys memory [ 0.090598] Initializing cgroup subsys devices [ 0.094033] Initializing cgroup subsys freezer [ 0.097259] Initializing cgroup subsys blkio [ 0.100932] Initializing cgroup subsys perf_event [ 0.104511] CPU: Testing write buffer coherency: ok [ 0.109714] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.116817] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available [ 0.122358] Setting up static identity map for 0x40724978 - 0x407249d0 [ 0.239014] CPU1: Booted secondary processor [ 0.297259] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.299266] Brought up 2 CPUs [ 0.304576] SMP: Total of 2 processors activated (3640.52 BogoMIPS). [ 0.307801] devtmpfs: initialized [ 0.313508] dummy: [ 0.317191] NET: Registered protocol family 16 [ 0.323533] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.331340] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.336153] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.339305] [ccu-inf] aw clock manager init [ 0.341577] [ccu-inf] aw_ccu_init [ 0.345547] [ccu-inf] script config pll3 to 297MHz [ 0.349298] [ccu-inf] script config pll4 to 300MHz [ 0.353045] [ccu-inf] script config pll6 to 600MHz [ 0.356806] [ccu-inf] script config pll7 to 297MHz [ 0.360553] [ccu-inf] script config pll8 to 336MHz [ 0.363315] Init eGon pin module V2.0 [ 0.372772] bio: create slab <bio-0> at 0 [ 0.376354] sunxi_gpio driver init ver 1.3 [ 0.382205] gpiochip_add: registered GPIOs 1 to 25 on device: A1X_GPIO [ 0.385370] SCSI subsystem initialized [ 0.388226] libata version 3.00 loaded. [ 0.392922] usbcore: registered new interface driver usbfs [ 0.397256] usbcore: registered new interface driver hub [ 0.401432] usbcore: registered new device driver usb [ 0.404546] Linux media interface: v0.10 [ 0.408154] Linux video capture interface: v2.00 [ 0.413790] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.419230] Switching to clocksource arch_sys_counter [ 0.421311] FS-Cache: Loaded [ 0.423489] CacheFiles: Loaded [ 0.433710] cfg80211: Calling CRDA to update world regulatory domain [ 0.439762] [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG [ 0.443544] [sw_hcd0]: usb host driver initialize........ [ 0.447632] [sw_udc]: udc_init: version 20080411 [ 0.451015] [sw_udc]: usb_vbase = 0xf1c13000 [ 0.454079] [sw_udc]: sram_vbase = 0xf1c00000 [ 0.457169] [sw_udc]: open_usb_clock [ 0.482356] udc->driver is null, udc is need not stop [ 0.486262] NET: Registered protocol family 2 [ 0.502800] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.509741] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.517296] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 0.524051] TCP: Hash tables configured (established 131072 bind 65536) [ 0.526256] TCP: reno registered [ 0.531133] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.536484] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.540074] NET: Registered protocol family 1 [ 0.545374] RPC: Registered named UNIX socket transport module. [ 0.549035] RPC: Registered udp transport module. [ 0.552692] RPC: Registered tcp transport module. [ 0.558159] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.562748] Trying to unpack rootfs image as initramfs... [ 0.810901] Freeing initrd memory: 3556K [ 0.816436] audit: initializing netlink socket (disabled) [ 0.820144] type=2000 audit(0.810:1): initialized [ 0.824597] highmem bounce pool size: 64 pages [ 0.836422] VFS: Disk quotas dquot_6.5.2 [ 0.841902] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.849276] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.854867] NFS: Registering the id_resolver key type [ 0.859370] NTFS driver 2.1.30 [Flags: R/W]. [ 0.862679] fuse init (API version 7.18) [ 0.867274] JFS: nTxBlock = 6981, nTxLock = 55850 [ 0.884773] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 0.889150] Btrfs loaded [ 0.891968] msgmni has been set to 1217 [ 0.899641] alg: No test for stdrng (krng) [ 0.906369] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.909259] io scheduler noop registered [ 0.912483] io scheduler deadline registered [ 0.916221] io scheduler cfq registered (default) [ 0.921060] sunxi disp driver loaded (/dev/disp api 1.0) [ 0.926630] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.931256] [uart]: used uart info.: 0x05 [ 0.935974] [uart]: serial probe 0 irq 33 mapbase 0x01c28000 [ 0.962243] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A [ 0.964831] console [ttyS0] enabled [ 0.969705] [uart]: serial probe 2 irq 35 mapbase 0x01c28800 [ 0.995932] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A [ 0.998522] G2D: drv_g2d_init [ 1.003224] G2D: g2dmem: g2d_start=49000000, g2d_size=1000000 [ 1.006485] G2D: head:c9000000,tail:ca000000 [ 1.009824] G2D: Module initialized.major:250 [ 1.018977] brd: module loaded [ 1.024978] loop: module loaded [ 1.028328] [NAND] nand driver version: 0x2 0x9 [ 1.083383] Dev Sunxi softw311 nand magic does not match for MBR 1: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff [ 1.089451] Dev Sunxi softw311 nand magic does not match for MBR 2: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff [ 1.095470] Dev Sunxi softw311 nand magic does not match for MBR 3: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff [ 1.101472] Dev Sunxi softw311 nand magic does not match for MBR 4: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff [ 1.109219] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present. [ 1.115242] Dev Sunxi softw411 nand magic does not match for MBR 1: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff [ 1.123222] Dev Sunxi softw411 nand magic does not match for MBR 2: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff [ 1.131171] Dev Sunxi softw411 nand magic does not match for MBR 3: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff [ 1.139105] Dev Sunxi softw411 nand magic does not match for MBR 4: \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff\xffffffff [ 1.146840] Dev Sunxi softw411 nand header bad for all MBR copies, MBR corrupted or not present. [ 1.149915] nand: unknown partition table [ 1.152365] [NAND]nand driver, ok. [ 1.158743] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP [ 1.163222] ahci: SSS flag set, parallel bus scan disabled [ 1.170689] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.177584] sw_ahci sw_ahci.0: flags: ncq sntf stag pm led clo only pio slum part ccc [ 1.180988] scsi0 : sw_ahci_platform [ 1.188254] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.192725] [spi-inf] Found 2 spi devices in config files [ 1.199547] [spi-inf] boards num modalias max_spd_hz bus_num cs mode [ 1.203318] [spi-inf] spi_board0 irq gpio not used [ 1.210272] [spi-inf] 0 spidev 12000000 0 0 0x3 [ 1.214055] [spi-inf] spi_board1 irq gpio not used [ 1.221009] [spi-inf] 1 spidev 12000000 2 0 0x0 [ 1.225193] [spi-inf] sun7i_spi_probe: sun7i spi probe [ 1.229817] [spi-inf] sun7i_spi_probe: spi0 dma type: normal [ 1.233416] [spi-inf] bus num = 0, spi used = 1 [ 1.237854] [spi-inf] sun7i_spi_probe: spi0 cs bitmap: 0x1 [ 1.246416] [spi-inf] sun7i_spi_set_mclk: spi0 source = sdram_pll_p, src_clk = 480000000, mclk 96000000 [ 1.252330] sun7i-spi sun7i-spi.0: master is unqueued, this is deprecated [ 1.258460] [spi-inf] sun7i_spi_setup: enter, bpw: 8, mshz: 12000000, mode: 3 [ 1.267240] [spi-inf] sun7i_spi_probe: reuuimlla's SoC SPI Driver loaded for Bus SPI0 with 2 Slaves at most [ 1.276642] [spi-inf] sun7i_spi_probe: spi0 driver probe succeed, base f0518000, irq 42, dma_id_rx 24, dma_id_tx 24 [ 1.280595] [spi-inf] sun7i_spi_probe: sun7i spi probe [ 1.285237] [spi-inf] sun7i_spi_probe: spi2 dma type: normal [ 1.288811] [spi-inf] bus num = 2, spi used = 1 [ 1.293249] [spi-inf] sun7i_spi_probe: spi2 cs bitmap: 0x1 [ 1.301792] [spi-inf] sun7i_spi_set_mclk: spi2 source = sdram_pll_p, src_clk = 480000000, mclk 96000000 [ 1.307687] sun7i-spi sun7i-spi.2: master is unqueued, this is deprecated [ 1.313789] [spi-inf] sun7i_spi_setup: enter, bpw: 8, mshz: 12000000, mode: 0 [ 1.322577] [spi-inf] sun7i_spi_probe: reuuimlla's SoC SPI Driver loaded for Bus SPI2 with 2 Slaves at most [ 1.331977] [spi-inf] sun7i_spi_probe: spi2 driver probe succeed, base f051a000, irq 44, dma_id_rx 26, dma_id_tx 26 [ 1.338127] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 1.342900] Fixed MDIO Bus: probed [ 1.346222] sunxi_emac Using mii phy on PortA [ 1.360997] sunxi_emac Using MAC from SID: 02:07:07:43:22:60 [ 1.366506] gmac: use mac address from chipid [ 1.370604] gmac: device MAC address 02:07:07:43:22:60 [ 1.376250] [gmac]: sun6i_gmac platform driver registration completed [ 1.379510] PPP generic driver version 2.4.2 [ 1.383472] PPP BSD Compression module registered [ 1.387478] PPP Deflate Compression module registered [ 1.394745] PPP MPPE Compression module registered [ 1.398155] NET: Registered protocol family 24 [ 1.404022] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.409270] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.411771] [sw-ehci1]: open clock [ 1.434489] [sw-ehci1]: Set USB Power ON [ 1.440928] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.447215] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1 [ 1.451614] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000 [ 1.473648] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00 [ 1.476274] ehci_irq: port change detect [ 1.479500] hub 1-0:1.0: USB hub found [ 1.482434] hub 1-0:1.0: 1 port detected [ 1.485062] [sw-ohci1]: open clock [ 1.511217] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.517482] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2 [ 1.521787] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400 [ 1.533669] ata1: SATA link down (SStatus 0 SControl 300) [ 1.586709] hub 2-0:1.0: USB hub found [ 1.589617] hub 2-0:1.0: 1 port detected [ 1.592291] [sw-ehci2]: open clock [ 1.614968] [sw-ehci2]: Set USB Power ON [ 1.621403] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.627657] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3 [ 1.632050] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000 [ 1.653647] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00 [ 1.656270] ehci_irq: port change detect [ 1.659606] hub 3-0:1.0: USB hub found [ 1.662532] hub 3-0:1.0: 1 port detected [ 1.665163] [sw-ohci2]: open clock [ 1.691305] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.697603] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4 [ 1.701903] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400 [ 1.766647] hub 4-0:1.0: USB hub found [ 1.769541] hub 4-0:1.0: 1 port detected [ 1.773819] Initializing USB Mass Storage driver... [ 1.778931] usbcore: registered new interface driver usb-storage [ 1.782502] USB Mass Storage support registered. [ 1.787448] usbcore: registered new interface driver ums-alauda [ 1.792450] usbcore: registered new interface driver ums-cypress [ 1.797469] usbcore: registered new interface driver ums-datafab [ 1.802654] usbcore: registered new interface driver ums_eneub6250 [ 1.807676] usbcore: registered new interface driver ums-freecom [ 1.812588] usbcore: registered new interface driver ums-isd200 [ 1.818030] usb 1-1: new high-speed USB device number 2 using sw-ehci [ 1.823074] usbcore: registered new interface driver ums-jumpshot [ 1.827916] usbcore: registered new interface driver ums-karma [ 1.833014] usbcore: registered new interface driver ums-onetouch [ 1.838052] usbcore: registered new interface driver ums-realtek [ 1.842975] usbcore: registered new interface driver ums-sddr09 [ 1.847905] usbcore: registered new interface driver ums-sddr55 [ 1.852741] usbcore: registered new interface driver ums-usbat [ 1.857511] mousedev: PS/2 mouse device common for all mice [ 1.863164] ===========================hv_keypad_init===================== [ 1.866579] ========HV Inital =================== [ 1.870504] tkey_fetch_sysconfig_para: tkey_unused. [ 1.877770] hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0 [ 1.882861] sunxi-rtc sunxi-rtc: Warning: RTC time is wrong! [ 1.888170] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0 [ 1.890683] i2c /dev entries driver [ 1.894505] config i2c gpio with gpio_config api [ 1.900127] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected [ 1.905970] axp_mfd 0-0034: AXP internal temperature monitoring enabled [ 1.910617] i2c i2c-0: Invalid probe address 0x00 [ 1.913712] I2C: i2c-0: AW16XX I2C adapter [ 1.917097] config i2c gpio with gpio_config api [ 1.921097] i2c i2c-1: Invalid probe address 0x00 [ 1.924179] I2C: i2c-1: AW16XX I2C adapter [ 1.927554] config i2c gpio with gpio_config api [ 1.931506] i2c i2c-2: Invalid probe address 0x00 [ 1.934584] I2C: i2c-2: AW16XX I2C adapter [ 1.937329] [cedar dev]: install start!!! [ 1.940312] [cedar dev]: install end!!! [ 1.943747] [tt]----- avs_dev driver load... ---- [ 1.947358] [tt]----- register iomem ---- [ 1.950157] Cannot reserve region for ccmu [ 1.953839] [tt]--- avs_dev driver load ok!! ----- [ 1.955592] [ace_drv] start!!! [ 1.957967] [ace_drv] init end!!! [ 1.959635] [pa_drv] start!!! [ 1.961927] [pa_drv] init end!!! [ 1.964303] axp20_ldo1: 1300 mV [ 1.969521] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV [ 1.975270] axp20_ldo3: 700 <--> 3500 mV at 2800 mV [ 1.977978] hub 1-1:1.0: USB hub found [ 1.981163] hub 1-1:1.0: 4 ports detected [ 1.986428] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV [ 1.991636] axp20_buck2: 700 <--> 2275 mV at 1400 mV [ 1.998225] somebody is trying to set dcdc3 range to (1250000, 1250000) uV [ 2.003250] but we keep dcdc3 = 1250000 uV from the bootloader [ 2.007538] axp20_buck3: 700 <--> 3500 mV at 1250 mV [ 2.012464] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV [ 2.022097] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input0 [ 2.040277] axp20_ldo2: Failed to create debugfs directory [ 2.043514] incomplete xfer (0x20) [ 2.045768] incomplete xfer (0x20) [ 2.048016] incomplete xfer (0x20) [ 2.050262] incomplete xfer (0x20) [ 2.052550] incomplete xfer (0x20) [ 2.054802] incomplete xfer (0x20) [ 2.057051] incomplete xfer (0x20) [ 2.059300] incomplete xfer (0x20) [ 2.061565] incomplete xfer (0x20) [ 2.063904] incomplete xfer (0x20) [ 2.066237] incomplete xfer (0x20) [ 2.068570] incomplete xfer (0x20) [ 2.070903] incomplete xfer (0x20) [ 2.073248] incomplete xfer (0x20) [ 2.075578] incomplete xfer (0x20) [ 2.077908] incomplete xfer (0x20) [ 2.080239] incomplete xfer (0x20) [ 2.082701] incomplete xfer (0x20) [ 2.085114] incomplete xfer (0x20) [ 2.087477] incomplete xfer (0x20) [ 2.089811] incomplete xfer (0x20) [ 2.092170] incomplete xfer (0x20) [ 2.094501] incomplete xfer (0x20) [ 2.096832] incomplete xfer (0x20) [ 2.099161] incomplete xfer (0x20) [ 2.104725] usb 3-1: new high-speed USB device number 2 using sw-ehci [ 2.106822] incomplete xfer (0x20) [ 2.109157] incomplete xfer (0x20) [ 2.113215] device-mapper: uevent: version 1.0.3 [ 2.121015] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.125973] device-mapper: multipath: version 1.3.2 loaded [ 2.131458] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.137060] device-mapper: multipath queue-length: version 0.1.0 loaded [ 2.142627] device-mapper: multipath service-time: version 0.2.0 loaded [ 2.146092] cpuidle: using governor ladder [ 2.148973] cpuidle: using governor menu [ 2.151300] [mmc-msg] sw_mci_init [ 2.157061] [mmc-msg] MMC host used card: 0x1, boot card: 0x0, io_card 0 [ 2.162314] [mmc-msg] sdc0 set round clock 400000, src 24000000 [ 2.170604] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 2.178809] [mmc-msg] sdc0 Probe: base:0xf0576000 irq:64 sg_cpu:f0578000(4fc00000) ret 0. [ 2.183382] [mmc_pm]: failed to fetch sdio card configuration! [ 2.185923] sunxi_leds driver init [ 2.191492] sunxi leds can't find script data '[leds_para]' 'leds_used' [ 2.196493] ledtrig-cpu: registered to indicate activity on CPUs [ 2.201723] usbcore: registered new interface driver usbhid [ 2.204547] usbhid: USB HID core driver [ 2.207273] ashmem: initialized [ 2.210906] logger: created 256K log 'log_main' [ 2.214748] logger: created 256K log 'log_events' [ 2.218465] logger: created 256K log 'log_radio' [ 2.222244] logger: created 256K log 'log_system' [ 2.229076] [sPDIF] [spdif_para] isn't defined or spdif_used=0 [ 2.231876] [i2S-0] Entered sunxi_i2s_init [ 2.239672] [i2S-0] sunxi-i2s cannot find any using configuration for controllers, return directly! [ 2.247419] [i2S-0] sndi2s cannot find any using configuration for controllers, return directly! [ 2.250475] [i2S-0] Entered sunxi_sndi2s_init [ 2.254004] IPv4 over IPv4 tunneling driver [ 2.256935] TCP: bic registered [ 2.259235] TCP: cubic registered [ 2.261859] TCP: westwood registered [ 2.264659] TCP: highspeed registered [ 2.266953] TCP: hybla registered [ 2.269137] TCP: htcp registered [ 2.271407] TCP: vegas registered [ 2.273624] TCP: veno registered [ 2.276163] TCP: scalable registered [ 2.278172] TCP: lp registered [ 2.280355] TCP: yeah registered [ 2.282946] TCP: illinois registered [ 2.286190] Initializing XFRM netlink socket [ 2.290243] NET: Registered protocol family 10 [ 2.295009] NET: Registered protocol family 17 [ 2.298444] NET: Registered protocol family 15 [ 2.303113] [mmc_pm]: No sdio card, please check your config !! [ 2.306879] Registering the dns_resolver key type [ 2.309035] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 2.317617] Registering SWP/SWPB emulation handler [ 2.322239] axp20_buck2: Failed to create debugfs directory [ 2.328434] [cpu_freq] INF:-------------------V-F Table------------------- [ 2.333483] [cpu_freq] INF: voltage = 1450mv frequency = 1008MHz [ 2.338548] [cpu_freq] INF: voltage = 1400mv frequency = 912MHz [ 2.343594] [cpu_freq] INF: voltage = 1300mv frequency = 864MHz [ 2.349079] usb 1-1.3: new low-speed USB device number 3 using sw-ehci [ 2.354137] [cpu_freq] INF: voltage = 1250mv frequency = 792MHz [ 2.359324] [cpu_freq] INF: voltage = 1200mv frequency = 720MHz [ 2.364416] [cpu_freq] INF: voltage = 1150mv frequency = 624MHz [ 2.369462] [cpu_freq] INF: voltage = 1100mv frequency = 528MHz [ 2.374520] [cpu_freq] INF: voltage = 1050mv frequency = 312MHz [ 2.379566] [cpu_freq] INF: voltage = 1000mv frequency = 0MHz [ 2.385456] [cpu_freq] INF:----------------------------------------------- [ 2.395134] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 60MHz [ 2.399098] registered taskstats version 1 [ 2.403730] I2C: i2c-3: HDMI I2C adapter [ 2.430520] ParseEDID [ 2.447535] EDID version: 1.3 [ 2.453801] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP [ 2.457654] Using above mode as preferred EDID mode [ 2.468163] Unimplemented SVD code 2 [ 2.470781] Unimplemented SVD code 22 [ 2.473425] Unimplemented SVD code 31 [ 2.475746] Reserved SVD code 101 [ 2.478386] Unimplemented SVD code 12 [ 2.484256] disp_clk: Could not find a matching pll-freq for 74200000 pclk [ 2.490137] disp_clk: Could not find a matching pll-freq for 25150000 pclk [ 2.496009] disp_clk: Could not find a matching pll-freq for 53900000 pclk [ 2.501958] disp_clk: Could not find a matching pll-freq for 172900000 pclk [ 2.507931] disp_clk: Could not find a matching pll-freq for 118650000 pclk [ 2.513793] disp_clk: Could not find a matching pll-freq for 78800000 pclk [ 2.519695] disp_clk: Could not find a matching pll-freq for 26150000 pclk [ 2.524191] Parse_VideoData_Block: VIC 16 (native) support [ 2.527795] Parse_VideoData_Block: VIC 5 support [ 2.536914] input: PIXART USB OPTICAL MOUSE as /devices/platform/sw-ehci.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input1 [ 2.540515] Parse_VideoData_Block: VIC 4 support [ 2.551372] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-sw-ehci-1.3/input0 [ 2.555016] Parse_VideoData_Block: VIC 3 support [ 2.558627] Parse_VideoData_Block: VIC 2 support [ 2.562224] Parse_VideoData_Block: VIC 7 support [ 2.565902] Parse_VideoData_Block: VIC 22 support [ 2.569473] Parse_VideoData_Block: VIC 1 support [ 2.573179] Parse_VideoData_Block: VIC 20 support [ 2.576837] Parse_VideoData_Block: VIC 31 support [ 2.580493] Parse_VideoData_Block: VIC 18 support [ 2.584162] Parse_VideoData_Block: VIC 19 support [ 2.587637] Find HDMI Vendor Specific DataBlock [ 2.593902] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP [ 2.599803] PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP [ 2.605673] PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP [ 2.611158] PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN [ 2.617857] disp clks: lcd 148500000 pre_scale 1 hdmi 148500000 pll 297000000 2x 0 [ 2.664784] usb 1-1.4: new low-speed USB device number 4 using sw-ehci [ 2.808674] input: SIGMACHIP USB Keyboard as /devices/platform/sw-ehci.1/usb1/1-1/1-1.4/1-1.4:1.0/input/input2 [ 2.820297] generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [sIGMACHIP USB Keyboard] on usb-sw-ehci-1.4/input0 [ 2.833040] input: SIGMACHIP USB Keyboard as /devices/platform/sw-ehci.1/usb1/1-1/1-1.4/1-1.4:1.1/input/input3 [ 2.844306] generic-usb 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [sIGMACHIP USB Keyboard] on usb-sw-ehci-1.4/input1 [ 3.168211] [mmc-msg] mmc 0 detect change, present 1 [ 3.667263] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 3.669721] [mmc-msg] sdc0 power on [ 3.697681] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 3.702604] [mmc-msg] sdc0 set round clock 400000, src 24000000 [ 3.774980] [mmc-err] smc 0 err, cmd 52, RTO [ 3.779139] [mmc-err] smc 0 err, cmd 52, RTO [ 3.787515] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 3.798306] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 3.803705] [mmc-err] smc 0 err, cmd 5, RTO [ 3.807775] [mmc-err] smc 0 err, cmd 5, RTO [ 3.811839] [mmc-err] smc 0 err, cmd 5, RTO [ 3.815930] [mmc-err] smc 0 err, cmd 5, RTO [ 3.824965] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 3.833350] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 3.844124] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 3.880016] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 3.888506] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 3.893686] [mmc-msg] sdc0 set round clock 42857143, src 600000000 [ 3.957250] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 3.961743] mmc0: new high speed SDHC card at address b368 [ 3.965908] mmcblk0: mmc0:b368 NCard 7.48 GiB [ 3.969673] mmcblk0: p1 [ 4.071594] Console: switching to colour frame buffer device 240x67 [ 4.138254] axp20_buck3: incomplete constraints, leaving on [ 4.143055] axp20_buck2: incomplete constraints, leaving on [ 4.147825] axp20_ldo4: incomplete constraints, leaving on [ 4.152537] axp20_ldo3: incomplete constraints, leaving on [ 4.157274] axp20_ldo2: incomplete constraints, leaving on [ 4.161984] axp20_ldo1: incomplete constraints, leaving on [ 4.165088] console [netcon0] enabled [ 4.168580] netconsole: network logging started [ 4.172765] otg_wakelock_init: No USB transceiver found [ 4.174890] ALSA device list: [ 4.177941] #0: sunxi-CODEC Audio Codec [ 4.181273] Freeing init memory: 224K [ 4.267520] systemd-udevd[94]: starting version 215 [ 5.428376] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) [ 5.914250] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 5.918946] systemd[1]: Detected architecture 'arm'. [ 5.938088] systemd[1]: Set hostname to <pcduino3>. [ 6.495978] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 6.508369] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 6.515702] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.520607] systemd[1]: Expecting device dev-ttyS0.device... [ 6.526367] systemd[1]: Starting Remote File Systems (Pre). [ 6.532341] systemd[1]: Reached target Remote File Systems (Pre). [ 6.539679] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 6.547163] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 6.550179] systemd[1]: Starting Paths. [ 6.554431] systemd[1]: Reached target Paths. [ 6.558489] systemd[1]: Starting Encrypted Volumes. [ 6.563691] systemd[1]: Reached target Encrypted Volumes. [ 6.571773] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 6.582052] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.585625] systemd[1]: Starting Root Slice. [ 6.590336] systemd[1]: Created slice Root Slice. [ 6.594887] systemd[1]: Starting User and Session Slice. [ 6.600832] systemd[1]: Created slice User and Session Slice. [ 6.605503] systemd[1]: Starting Delayed Shutdown Socket. [ 6.611393] systemd[1]: Listening on Delayed Shutdown Socket. [ 6.617319] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 6.624439] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 6.629256] systemd[1]: Starting Journal Socket (/dev/log). [ 6.635357] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.639637] systemd[1]: Starting udev Control Socket. [ 6.645115] systemd[1]: Listening on udev Control Socket. [ 6.649288] systemd[1]: Starting udev Kernel Socket. [ 6.654598] systemd[1]: Listening on udev Kernel Socket. [ 6.658437] systemd[1]: Starting Journal Socket. [ 6.663517] systemd[1]: Listening on Journal Socket. [ 6.667272] systemd[1]: Starting System Slice. [ 6.672297] systemd[1]: Created slice System Slice. [ 6.677749] systemd[1]: Started File System Check on Root Device. [ 6.681864] systemd[1]: Starting system-getty.slice. [ 6.687655] systemd[1]: Created slice system-getty.slice. [ 6.692667] systemd[1]: Starting system-serial\x2dgetty.slice. [ 6.699332] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 6.704954] systemd[1]: Starting Increase datagram queue length... [ 6.816252] systemd[1]: Starting Restore / save the current clock... [ 6.838078] systemd[1]: Mounting POSIX Message Queue File System... [ 6.868156] systemd[1]: Started Set Up Additional Binary Formats. [ 6.872847] systemd[1]: Mounted Huge Pages File System. [ 6.896393] systemd[1]: Starting Load Kernel Modules... [ 6.919840] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 6.948685] systemd[1]: Mounting Debug File System... [ 6.975301] systemd[1]: Starting udev Coldplug all Devices... [ 6.998222] Bluetooth: Core ver 2.16 [ 7.001739] NET: Registered protocol family 31 [ 7.007166] Bluetooth: HCI device and connection manager initialized [ 7.011014] Bluetooth: HCI socket layer initialized [ 7.015083] Bluetooth: L2CAP socket layer initialized [ 7.018961] Bluetooth: SCO socket layer initialized [ 7.024587] systemd[1]: Starting LSB: Set keymap... [ 7.035374] Bluetooth: HCI UART driver ver 2.2 [ 7.039262] Bluetooth: HCI H4 protocol initialized [ 7.045717] Bluetooth: HCI BCSP protocol initialized [ 7.049473] Bluetooth: HCILL protocol initialized [ 7.053628] Bluetooth: HCIATH3K protocol initialized [ 7.056625] systemd[1]: Starting Slices. [ 7.074079] systemd[1]: Reached target Slices. [ 7.087073] systemd[1]: Mounted Debug File System. [ 7.094316] systemd[1]: Mounted POSIX Message Queue File System. [ 7.101955] Bluetooth: RFCOMM TTY layer initialized [ 7.106315] Bluetooth: RFCOMM socket layer initialized [ 7.109057] Bluetooth: RFCOMM ver 1.11 [ 7.122691] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 7.129363] systemd[1]: Started Increase datagram queue length. [ 7.151558] input: sunxi-ir as /devices/virtual/input/input4 [ 7.158597] systemd[1]: Started Restore / save the current clock. [ 7.161587] IR Initial OK [ 7.175046] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 7.180446] UMP<2>: Inserting UMP device driver. Compiled: Sep 14 2016, time: 19:40:32 [ 7.188090] UMP<2>: dma_set_mask_and_coherent calling [ 7.191972] UMP<2>: dma_set_mask_and_coherent result=-5 [ 7.195925] UMP<2>: dma_set_mask_and_coherent failed [ 7.199627] UMP<2>: Using CMA memory backend, allocation limit: 134217728 [ 7.204958] UMP: UMP device driver loaded [ 7.235417] Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x4A000000, size=33554432) [ 7.248320] systemd[1]: Started LSB: Set keymap. [ 7.252257] mali: use config clk_div 1 [ 7.254054] mali: clk_div 1 [ 7.254612] Mali: mali clock set completed, clock is 312000000 Hz [ 7.271002] systemd[1]: Time has been changed [ 7.274098] mali: use config clk_div 1 [ 7.275879] mali: clk_div 1 [ 7.276440] Mali: mali clock set completed, clock is 312000000 Hz [ 7.288259] systemd[1]: Starting Create Static Device Nodes in /dev... [ 7.299424] Mali: Mali device driver loaded [ 7.340462] systemd[1]: Starting Syslog Socket. [ 7.349521] systemd[1]: Listening on Syslog Socket. [ 7.368862] systemd[1]: Starting Journal Service... [ 7.393330] systemd[1]: Started Journal Service. [ 7.715885] systemd-udevd[177]: starting version 215 [ 9.692020] 8192cu: disagrees about version of symbol module_layout [ 10.463434] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 10.863808] Adding 131068k swap on /var/swap. Priority:-1 extents:1 across:131068k SS [ 11.560451] systemd-journald[173]: Received request to flush runtime journal from PID 1 [ 16.973488] sunxi_emac sunxi_emac.0: eth0: link down [ 16.980421] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.978169] Warning: this sunxi disp driver will see significant redesign. [ 19.982965] Applications using /dev/disp directly will break. [ 20.005733] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver [ 20.009041] [DISP] layer allocated: 0,101 [ 20.114830] [drm] Initialized drm 1.1.0 20060810 [ 20.127079] Mali DRM initialize, driver name: mali_drm, version 2.1 [ 20.149396] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0 [ 20.155197] Mali DRM initialize, driver name: mali_drm, version 2.1 [ 20.164745] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1 [ 20.196118] UMP<2>: New session opened [ 21.821387] ADDRCONF(NETDEV_UP): bond0: link is not ready [ 21.978120] sunxi_gmac: probed [ 21.983526] eth1: PHY ID 001cc915 at 0 IRQ 0 (sunxi_gmac-0:00) active [ 21.991104] eth1: PHY ID 001cc915 at 1 IRQ 0 (sunxi_gmac-0:01) [ 28.037440] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.041660] Bluetooth: BNEP filters: protocol multicast [ 83.104990] usb 1-1.2: new high-speed USB device number 5 using sw-ehci [ 83.241214] scsi1 : usb-storage 1-1.2:1.0 [ 84.867208] scsi 1:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 4 [ 84.875700] sd 1:0:0:0: [sda] 31703040 512-byte logical blocks: (16.2 GB/15.1 GiB) [ 84.881077] sd 1:0:0:0: [sda] Write Protect is off [ 84.885952] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 84.892251] sd 1:0:0:0: [sda] No Caching mode page found [ 84.896522] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 84.901858] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 84.910843] sd 1:0:0:0: [sda] No Caching mode page found [ 84.916027] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 84.918470] sda: sda1 [ 84.926464] sd 1:0:0:0: [sda] No Caching mode page found [ 84.931516] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 84.936022] sd 1:0:0:0: [sda] Attached SCSI removable disk [ 110.769693] usb 1-1.2: USB disconnect, device number 5 [ 146.844924] usb 1-1.2: new high-speed USB device number 6 using sw-ehci [ 146.958472] scsi2 : usb-storage 1-1.2:1.0 [ 148.583819] scsi 2:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 4 [ 148.594333] sd 2:0:0:0: [sda] 31703040 512-byte logical blocks: (16.2 GB/15.1 GiB) [ 148.599880] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 148.609422] sd 2:0:0:0: [sda] Write Protect is off [ 148.613613] sd 2:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 148.621063] sd 2:0:0:0: [sda] No Caching mode page found [ 148.626192] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 148.635475] sd 2:0:0:0: [sda] No Caching mode page found [ 148.640527] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 148.642962] sda: sda1 [ 148.655992] sd 2:0:0:0: [sda] No Caching mode page found [ 148.661073] sd 2:0:0:0: [sda] Assuming drive cache: write through [ 148.665791] sd 2:0:0:0: [sda] Attached SCSI removable disk