Homoran

Members
  • Content Count

    19
  • Joined

  • Last visited

About Homoran

  • Rank
    Member

Recent Profile Visitors

536 profile views
  1. I have the same problem I cannot resize the fs to the larger SD card neither the command update-rc.d firstrun defaults works, it returns update-rc.d: error: unable to read /etc/init.d/firstrun nor the above mentioned resite2fs, it retirnes the above mentioned "Nothing to do!" Thanks for any help Rainer
  2. In the meanwhile something happens. we do not know what and why but.... a lot of reboots and tries later it works (at both installations) many times I did a reboot and immediately looked into /proc/filesystems -> no cifs. tried to install cifs-utils -> already latest version trying to mount with mount -t cifs -o user=meinUser,password=meinPasswort,rw,file_mode=0777,dir_mode=0777,vers=1.0 //192.168.178.123/Backups/ioBroker/Rock01 /opt/iobroker/backups always failed. Changing mod and ver no success. But suddenly it worked. looking into /proc/filesystems -> cifs included at the last row. And all went well On the OPi install a try to change the smb package via armbian-config at 3.-Party-Software didn't help. the apt purge cifs-utils and apt install cifs-utils again helped. At that point all went well again. Thank you for your help. I personally do not like healing by speaking a spell - I would like to know what went wrong. In the next days I will look at my Installations whether I can find another System with this Issue. My yesterday newly installed OPi+2e with ARMBIAN 5.38 stable Debian GNU/Linux 9 (stretch) 4.14.18-sunxi went well. Or will it make sense to try to find anything in the (now working) Installation? Greetings Rainer
  3. Hi TK, thanks for the fast response! I'm not knowing what I'm doing http://ix.io/1kLX Is this what you wanted to have??? Greetz Rainer
  4. I'm not sure whether this is the correct place. Sorry if it isn't and please move it to where it belongs - thanks! The problem is: in our community (forum.iobroker.net) came up problems with mounting to a nas by cifs. ioBroker is a smart home management, and a new module ("adapter") has been designed to provide automated backups to a nas. in most cases this works fine, but on some platforms with armbian it fails with the message: cifs filesystem not supported by the system I'm not that linux crack, but i tried to find out what could cause this, I found at this site https://www.linuxquestions.org/question ... 175593855/ some help. In all versions the message mentioned above occured /proc/filesystems didn't contain cifs in the versions the backup worked, cifs was included. At the moment we have confirmed it at orangePi plus2e (ARMBIAN 5.38 stable Ubuntu 16.04.5 LTS 4.14.4-sunxi) and I could reproduce it on a Rock64 (nightly Ubuntu 16.04.5 LTS 4.4.131-rk3328) ( I know it's nighly!!) The platforms will have different age of images, and the users will not have updated/upgraded It seems that the problem occurs only at Ubuntu based images (cifs-utils already installed and at newest version), not at Debian based. on A Tinkerboard Ubuntu image (Ubuntu 16.04.5 LTS 4.4.120-rockchip) all is ok, so it is not at all ubuntu images. calling: sudo modprobe cifs on my rock64 installation, the response was modprobe: ERROR: ../libkmod/libkmod.c:586 kmod_search_moddep() could not open moddep file '/lib/modules/4.4.131-rk3328/modules.dep.bin' modprobe: FATAL: Module cifs not found in directory /lib/modules/4.4.131-rk3328 Is this a common issue and known? And the more imortant question: What can be done? thanks for every help in advance Rainer
  5. Hi Igor, Thank you, in Armbian_5.43.180415_Rock64_Debian_stretch_dev_4.16.0-rc6.img it works again! Greetz Rainer
  6. Hi Igor, I can confirm this issue. last week I had to reinstall armbian and it won't start. After installing to eMMC from an SD card via armbian-config, removing the card and rebooting - there was apparently nothing. A ping to the Rock64 was possible, but nothing else. I tried a lot, even some more images I had downloaded earlier. The first one (out of my downloads) that worked was Armbian_5.32.170919_Rock64_Ubuntu_xenial_default_4.4.77.img armbian-config wasn't supplied, but was automatically installed when calling the command sudo armbian-config After moving to eMMC and removing the SD-Card all worked well, even all updates and upgrades. Hope this may help a little on searching (and finding) the reason for it. EDIT: I was told that installing the image directly to the eMMC using an USB-to-eMMC Adapter will produce a bootable Armbian Greets Rainer
  7. Hi Igor, The command update-rc.d firstrun defaults seems not to work anymore I have tried several times on a tinkerboard image, but it doesn't start at reboot. there is the following output after entering the command: root@tinkerboard:~# update-rc.d firstrun defaults insserv: warning: current start runlevel(s) (empty) of script `firstrun' overrides LSB defaults (2 3 4 5). insserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `firstrun' overrides LSB defaults (0 1 6). btw, did you think about to add this options (resize fs; change passwd etc.) to the armbian-config tool? Greetz Rainer
  8. Just to ask, is there a solution in sight. Thanks again Rainer
  9. No Problem! So I will revert this by doingt apt-get update && apt-get-upgrade again? Or will I have to do something else? Greets Rainer
  10. Hello Igor, As Zador.blood.stained mentioned. I didn't do any such things ;-)
  11. Hi to all, sorry if it is already described anywhere. I found some similar issues but no solution, except ...has to be modified.. or anything similar. Two days ago I updated my Armbian Jessie server on may Cubietruck with apt-get update && apt-get upgrade After that my homeautomation didn't show the SoC temperature any more. first I looked for an error in the software, then after a lot of reboots I noticed the temperature also missing in the armbian startscreen. The command cat /sys/devices/virtual/thermal/thermal_zone0/temp was responsed by cat: /sys/devices/virtual/thermal/thermal_zone0/temp: Invalid argument a commit of tkaiser I found at github (Adjust thermal readouts) but it didn't really help me even the Armbianmonitor says: cubie@ioBroker-Cubie:~$ sudo armbianmonitor -m Stop monitoring using [ctrl]-[c] Time CPU load %cpu %sys %usr %nice %io %irq CPU 18:25:43: 864MHz 2.75 34% 4% 22% 0% 6% 0%/usr/bin/armbianmonitor: line 274: read: read error: 0: Invalid argument /usr/bin/armbianmonitor: line 275: [: -ge: unary operator expected It was working fine for months: Thanks for any help Rainer
  12. Thanks again, it works very fine! The reaction of the first user testing it: The most important things: "great work" "works like a charm" "perfect" Thanks again. And you're right concerning the image size. But it's a method I can handle and it's almost near to 2GB and empty space will be "eliminated" by zipping. Kind Regards Rainer
  13. THANKS! I will test it this evening Regards Rainer
  14. Hi Igor thanks for your prompt answer. I don't think it's strange - it's due to my little knowledge no I don't ( I even do not have any idea how to do) I really can't build an image like I guess you would do it. I install your image - that works great out of the box! Then I install all packages of ioBroker - take the card out of the (Banana/Cubie/Cubox) - read the SD card with win32diskimager - zip the file This is what I call "Image" It is possible to work with it but limited to the file size of the image. That's really true, but how can I start this in my "Image" Thanks again and sorry for the trouble Rainer