Jump to content

KernelPanic

Members
  • Posts

    4
  • Joined

  • Last visited

Everything posted by KernelPanic

  1. Yes, I do: # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_VT_CONSOLE_SLEEP=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_UNIX98_PTYS=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=0 # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_N_GSM is not set # CONFIG_TRACE_SINK is not set CONFIG_DEVMEM=y # CONFIG_DEVKMEM is not set
  2. Dear Sirs and Madams! I am working on custom minimal image for NanoPi NEO and I've managed to solve majority of problems, however, if I observe boot process via /dev/ttyUSB0, I still get these two errors: HELLO! BOOT0 is starting! boot0 version : 4.0.0 boot0 commit : 1b3a1b587482affdd18aba923de7fe38eb7d5ee1 fel_flag = 0x00000000 rtc[0] value = 0x00000000 rtc[1] value = 0x00000000 rtc[2] value = 0x00000000 rtc[3] value = 0x00000000 rtc[4] value = 0x00000000 rtc[5] value = 0x00000000 rtc[6] value = 0x00000000 rtc[7] value = 0x00000000 DRAM DRIVE INFO: V1.3 the chip id is 0x00000081 the chip id is 0x00000081 the chip id is 0x00000081 the chip id is 0x00000081 the chip id is 0x00000081 READ DQS LCDL = 00222223 DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3) DRAM CLK = 576 MHz DRAM zq value: 003b3bfb DRAM dram para1: 10f20200 DRAM dram para2: 00000001 DRAM workmode1: 000009f4 DRAM SIZE =512 M odt delay dram size =512 card boot number = 0 card no is 0 sdcard 0 line count 4 [mmc]: mmc driver ver 2015-04-13 16:07:39 [mmc]: ***Try SD card 0*** [mmc]: SD/MMC Card: 4bit, capacity: 7386MB [mmc]: vendor: Man 0002544d Snr 4583d869 [mmc]: product: SA08G [mmc]: revision: 1.9 [mmc]: ***SD/MMC 0 init OK!!!*** sdcard 0 init ok The size of uboot is 000e4000. sum=168b7a54 src_sum=168b7a54 Succeed in loading uboot from sdmmc flash. Ready to disable icache. Jump to secend Boot. SUNXI_NORMAL_MODE [ 0.382]e mode U-Boot 2011.09-rc1-00000-g1b3a1b5-dirty (Dec 23 2016 - 20:03:28) [ 0.392]version: 1.1.0 [ 0.395]uboot commit : 1b3a1b587482affdd18aba923de7fe38eb7d5ee1 normal mode [ 0.406]pmbus: ready not set main pmu id axp_probe error gpio value=0x20000 [ 0.444]PMU: pll1 1008 Mhz,PLL6=600 Mhz AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz sid read already fel key new mode run key detect no key found no key input dram_para_set start dram_para_set end normal mode [ 0.475]DRAM: 512 MiB relocation Offset is: 15af2000 [box standby] read rtc = 0x0 [box_start_os] mag be start_type no use user_gpio config user_gpio ok gic: normal or no secure os mode workmode = 0 MMC: 0 [ 0.555][mmc]: mmc driver ver 2015-04-13 14:50:00 [ 0.560][mmc]: get sdc_phy_wipe fail. [ 0.564][mmc]: get sdc0 sdc_erase fail. [ 0.568][mmc]: get sdc_f_max fail,use default 50000000Hz [ 0.573][mmc]: get sdc_ex_dly_used fail,use default dly [ 0.579][mmc]: SUNXI SD/MMC: 0 [ 0.592][mmc]: *Try SD card 0* [ 0.625][mmc]: CID 0x2544d53 0x41303847 0x194583d8 0x690106bd [ 0.630][mmc]: mmc clk 50000000 [ 0.634][mmc]: SD/MMC Card: 4bit, capacity: 7386MB [ 0.638][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB [ 0.644][mmc]: ***SD/MMC 0 init OK!!!*** [ 0.648][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte [ 0.654][mmc]: secure_feature 0x0 [ 0.657][mmc]: secure_removal_type 0x0 [ 0.661]sunxi flash init ok script config pll_de to 864 Mhz Not Found clk pll_video1 in script script config pll_video to 297 Mhz script config pll_periph0 to 600 Mhz unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu] enable power vcc-hdmi-18, ret=-1 DRV_DISP_Init end [disk_read_fs] no the partition error: open tv_vdid.fex, maybe it is not exist [disk_read_fs] no the partition error: open disp_rsl.fex, maybe it is not exist [disk_read_fs] no the partition error: open disp_rsl.fex, maybe it is not exist boot_disp.auto_hpd=1 auto hpd check has 100 times! auto check no any connected, the output_type is 4 [ 2.036]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x0 try to read logic blk 0 without env partition *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial --------fastboot partitions-------- mbr not exist base bootcmd=run setargs_mmc boot_normal bootcmd set setargs_mmc key 0 cant find rcvy value cant find fstbt value no misc partition is found to be run cmd=run setargs_mmc boot_normal [ 2.085][mmc]: MMC Device 2 not found [ 2.089][mmc]: Can not find mmc dev [ 2.092][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1854 sunxi_secstorage_read fail get secure storage map err check user data form private the private part isn't exist WORK_MODE_BOOT adver not need show sunxi_bmp_logo_display ** Unable to read "bootlogo.bmp" from mmc 0:1 ** sunxi bmp info error : unable to open logo file bootlogo.bmp [ 2.126]Hit any key to stop autoboot: 0 ## Booting kernel from Legacy Image at 40007800 ... Image Name: Linux-3.4.39-h3 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4736568 Bytes = 4.5 MiB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK [ 4.613][mmc]: MMC Device 2 not found [ 4.617][mmc]: mmc not find,so not exit [ 4.621] Starting kernel ... [sun8i_fixup]: From boot, get meminfo: Start: 0x40000000 Size: 512MB ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1 ion_reserve_select: ion chipid [0x2c00081! ion_reserve_common: ion reserve: [0x56000000, 0x60000000]! [ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.39-h3 (testuser@work002) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #9 SMP PREEMPT Sun Dec 25 05:37:06 CET 2016 [ 0.000000] cma: CMA: reserved 160 MiB at 56000000 [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0fc7000 s11840 r8192 d12736 u32768 [ 0.000000] Kernel command line: console=ttyS0,115200 console=tty0 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait init=/sbin/init storage_type=1 fb_base=0x40000000 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 512MB = 512MB total [ 0.000000] Memory: 342160k/342160k available, 182128k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0910624 (9250 kB) [ 0.000000] .init : 0xc0911000 - 0xc0962e40 ( 328 kB) [ 0.000000] .data : 0xc0964000 - 0xc0a156f8 ( 710 kB) [ 0.000000] .bss : 0xc0a15eac - 0xc0b35b48 (1152 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:544 [ 0.000000] Architected local timer running at 24.00MHz. [ 0.000000] Switching to timer-based delay loop [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000996] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000) [ 0.001064] pid_max: default: 32768 minimum: 301 [ 0.001439] Mount-cache hash table entries: 512 [ 0.002510] Initializing cgroup subsys cpuacct [ 0.002553] Initializing cgroup subsys memory [ 0.002624] Initializing cgroup subsys devices [ 0.002656] Initializing cgroup subsys freezer [ 0.002685] Initializing cgroup subsys blkio [ 0.002728] Initializing cgroup subsys perf_event [ 0.002808] CPU: Testing write buffer coherency: ok [ 0.002885] ftrace: allocating 24837 entries in 73 pages [ 0.040323] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.040371] [sunxi_smp_prepare_cpus] enter [ 0.040428] Setting up static identity map for 0x40663670 - 0x406636c8 [ 0.041476] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.041611] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.041611] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.050225] Brought up 4 CPUs [ 0.050307] SMP: Total of 4 processors activated (19200.00 BogoMIPS). [ 0.051054] devtmpfs: initialized [ 0.054009] wakeup src cnt is : 2. [ 0.054107] sunxi pm init [ 0.054257] pinctrl core: initialized pinctrl subsystem [ 0.064426] NET: Registered protocol family 16 [ 0.065333] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.065333] script_sysfs_init success [ 0.065333] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl [ 0.065333] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver [ 0.065333] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.065333] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.065333] script config pll_video to 297 Mhz [ 0.065333] script config pll_de to 864 Mhz [ 0.065333] script config pll_ve to 402 Mhz [ 0.073438] bio: create slab <bio-0> at 0 [ 0.073438] [ARISC] :sunxi-arisc driver v1.04 [ 0.088634] [ARISC] :arisc version: [v0.1.58] [ 0.175990] [ARISC] :sunxi-arisc driver v1.04 startup succeeded [ 0.176118] pwm module init! [ 0.181681] SCSI subsystem initialized [ 0.181681] usbcore: registered new interface driver usbfs [ 0.181681] usbcore: registered new interface driver hub [ 0.181681] usbcore: registered new device driver usb [ 0.181681] Linux media interface: v0.10 [ 0.181681] Linux video capture interface: v2.00 [ 0.181681] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.181681] Bluetooth: Core ver 2.16 [ 0.181681] NET: Registered protocol family 31 [ 0.181681] Bluetooth: HCI device and connection manager initialized [ 0.181681] Bluetooth: HCI socket layer initialized [ 0.181681] Bluetooth: L2CAP socket layer initialized [ 0.181681] Bluetooth: SCO socket layer initialized [ 0.181681] Switching to clocksource arch_sys_counter [ 0.203579] FS-Cache: Loaded [ 0.203920] CacheFiles: Loaded [ 0.215748] NET: Registered protocol family 2 [ 0.216064] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.216646] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.216936] TCP bind hash table entries: 16384 (order: 5, 196608 bytes) [ 0.217197] TCP: Hash tables configured (established 16384 bind 16384) [ 0.217226] TCP: reno registered [ 0.217249] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.217290] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.217597] NET: Registered protocol family 1 [ 0.217998] RPC: Registered named UNIX socket transport module. [ 0.218031] RPC: Registered udp transport module. [ 0.218052] RPC: Registered tcp transport module. [ 0.218074] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.218664] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available [ 0.218799] sunxi_reg_init enter [ 0.219482] audit: initializing netlink socket (disabled) [ 0.219543] type=2000 audit(0.210:1): initialized [ 0.222020] NTFS driver 2.1.30 [Flags: R/W]. [ 0.222337] fuse init (API version 7.18) [ 0.222704] msgmni has been set to 988 [ 0.224141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.224197] io scheduler noop registered [ 0.224218] io scheduler deadline registered [ 0.224290] io scheduler cfq registered (default) [ 0.224766] [DISP]disp_module_init [ 0.225089] cmdline,init_disp= [ 0.225132] cmdline,disp= [ 0.235328] [DISP] Fb_map_kernel_logo,line:939:this is not a bmp picture [ 0.250541] Console: switching to colour frame buffer device 160x45 [ 0.266915] [DISP]disp_module_init finish [ 0.267262] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator. [ 0.267442] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator. [ 0.267617] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator. [ 0.267790] sw_uart_get_devinfo()1503 - uart3 has no uart_regulator. [ 0.268543] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI [ 0.268713] sw_uart_pm()890 - uart0 clk is already enable [ 0.268868] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n [ 0.376733] console [ttyS0] enabled [ 1.310478] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI [ 1.448733] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI [ 1.460128] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI [ 1.472032] [drm] Initialized drm 1.1.0 20060810 [ 1.485687] loop: module loaded [ 1.493791] sunxi_spi_chan_cfg()1383 - [spi-0] has no spi_regulator. [ 1.505335] sunxi_spi_chan_cfg()1383 - [spi-1] has no spi_regulator. [ 1.517389] spi spi0: master is unqueued, this is deprecated [ 1.528397] tun: Universal TUN/TAP device driver, 1.6 [ 1.538353] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.550532] PPP generic driver version 2.4.2 [ 1.559774] PPP BSD Compression module registered [ 1.569280] PPP Deflate Compression module registered [ 1.580030] PPP MPPE Compression module registered [ 1.589604] NET: Registered protocol family 24 [ 1.598762] PPTP driver version 0.8.5 [ 1.607246] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.638932] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.652340] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1 [ 1.665889] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000 [ 1.690050] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00 [ 1.701640] hub 1-0:1.0: USB hub found [ 1.710104] hub 1-0:1.0: 1 port detected [ 1.739102] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.752404] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2 [ 1.765732] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000 [ 1.790034] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00 [ 1.801555] hub 2-0:1.0: USB hub found [ 1.809963] hub 2-0:1.0: 1 port detected [ 1.839037] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.852408] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3 [ 1.865798] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000 [ 1.890044] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00 [ 1.901646] hub 3-0:1.0: USB hub found [ 1.910317] hub 3-0:1.0: 1 port detected [ 1.939371] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.952767] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4 [ 1.966139] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000 [ 1.990039] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00 [ 2.001685] hub 4-0:1.0: USB hub found [ 2.010515] hub 4-0:1.0: 1 port detected [ 2.019762] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.051280] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 2.064440] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5 [ 2.077447] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400 [ 2.144574] hub 5-0:1.0: USB hub found [ 2.153308] hub 5-0:1.0: 1 port detected [ 2.182608] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 2.195828] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 6 [ 2.208971] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400 [ 2.284561] hub 6-0:1.0: USB hub found [ 2.293434] hub 6-0:1.0: 1 port detected [ 2.322774] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 2.336046] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7 [ 2.349215] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400 [ 2.424579] hub 7-0:1.0: USB hub found [ 2.433430] hub 7-0:1.0: 1 port detected [ 2.462785] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 2.476090] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8 [ 2.489325] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400 [ 2.564570] hub 8-0:1.0: USB hub found [ 2.573458] hub 8-0:1.0: 1 port detected [ 2.582823] Initializing USB Mass Storage driver... [ 2.593074] usbcore: registered new interface driver usb-storage [ 2.604387] USB Mass Storage support registered. [ 2.614237] usbcore: registered new interface driver ums-alauda [ 2.625555] usbcore: registered new interface driver ums-cypress [ 2.636955] usbcore: registered new interface driver ums-datafab [ 2.648220] usbcore: registered new interface driver ums_eneub6250 [ 2.659597] usbcore: registered new interface driver ums-freecom [ 2.670724] usbcore: registered new interface driver ums-isd200 [ 2.681770] usbcore: registered new interface driver ums-jumpshot [ 2.692886] usbcore: registered new interface driver ums-karma [ 2.703695] usbcore: registered new interface driver ums-onetouch [ 2.714693] usbcore: registered new interface driver ums-realtek [ 2.725491] usbcore: registered new interface driver ums-sddr09 [ 2.736116] usbcore: registered new interface driver ums-sddr55 [ 2.746706] usbcore: registered new interface driver ums-usbat [ 2.757179] usbcore: registered new interface driver usbserial [ 2.767517] usbserial: USB Serial Driver core [ 2.776172] usbcore: registered new interface driver option [ 2.786184] USB Serial support registered for GSM modem (1-port) [ 2.797311] file system registered [ 2.806559] android_usb gadget: Mass Storage Function, version: 2009/09/11 [ 2.818136] android_usb gadget: Number of LUNs=3 [ 2.827163] lun0: LUN: removable file: (no medium) [ 2.836455] lun1: LUN: removable file: (no medium) [ 2.845612] lun2: LUN: removable file: (no medium) [ 2.855037] android_usb gadget: android_usb ready [ 2.864797] mousedev: PS/2 mouse device common for all mice [ 2.875687] ls_fetch_sysconfig_para: ls_unused. [ 2.884819] [RTC] WARNING: Rtc time will be wrong!! [ 2.893888] [RTC] WARNING: use *internal OSC* as clock source [ 2.904172] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0 [ 2.915259] i2c /dev entries driver [ 2.923179] IR RC5(x) protocol handler initialized [ 2.946164] tscdev_init: tsc driver is disabled [ 2.955398] Driver for 1-wire Dallas network protocol. [ 2.964872] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0 [ 2.975787] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf [ 2.987390] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0) [ 3.002493] wdt_enable, write reg 0xf1c20cb8 val 0x00000000 [ 3.012555] timeout_to_interv, line 167 [ 3.020638] interv_to_timeout, line 189 [ 3.028656] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec [ 3.041847] device-mapper: uevent: version 1.0.3 [ 3.051209] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 3.064736] Bluetooth: HCI UART driver ver 2.2 [ 3.073733] Bluetooth: HCI H4 protocol initialized [ 3.083055] Bluetooth: HCI BCSP protocol initialized [ 3.092523] Bluetooth: HCILL protocol initialized [ 3.101732] Bluetooth: HCIATH3K protocol initialized [ 3.111395] Bluetooth: MSM Sleep Mode Driver Ver 1.2 [ 3.121046] Bluetooth: init no bt used in configuration [ 3.121052] [ 3.136836] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq [ 3.152870] no red_led, ignore it! [ 3.163113] usbcore: registered new interface driver usbhid [ 3.173851] usbhid: USB HID core driver [ 3.184005] script_get_item audio_pa_ctrl not found [ 3.197597] asoc: sndcodec <-> sunxi-codec mapping ok [ 3.213087] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok [ 3.223269] mmc0: new high speed SDHC card at address 1234 [ 3.235040] mmcblk0: mmc0:1234 SA08G 7.21 GiB [ 3.236190] oprofile: using arm/armv7-ca7 [ 3.254118] u32 classifier [ 3.255572] mmcblk0: p1 p2 [ 3.269650] Actions configured [ 3.278035] Netfilter messages via NETLINK v0.30. [ 3.287961] nf_conntrack version 0.5.0 (7906 buckets, 31624 max) [ 3.299763] ctnetlink v0.93: registering with nfnetlink. [ 3.310511] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 3.323174] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 3.334982] xt_time: kernel timezone is -0000 [ 3.344901] IPv4 over IPv4 tunneling driver [ 3.354937] gre: GRE over IPv4 demultiplexor driver [ 3.365265] ip_gre: GRE over IPv4 tunneling driver [ 3.375396] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.385587] arp_tables: (C) 2002 David S. Miller [ 3.394822] TCP: cubic registered [ 3.402518] Initializing XFRM netlink socket [ 3.411471] NET: Registered protocol family 10 [ 3.421543] Mobile IPv6 [ 3.428244] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.438359] IPv6 over IPv4 tunneling driver [ 3.447867] NET: Registered protocol family 17 [ 3.456657] NET: Registered protocol family 15 [ 3.465535] Bluetooth: RFCOMM TTY layer initialized [ 3.474746] Bluetooth: RFCOMM socket layer initialized [ 3.484148] Bluetooth: RFCOMM ver 1.11 [ 3.491899] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.501359] Bluetooth: BNEP filters: protocol multicast [ 3.510638] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.520806] L2TP core driver, V2.0 [ 3.528087] PPPoL2TP kernel driver, V2.0 [ 3.535995] L2TP IP encapsulation support (L2TPv3) [ 3.544926] L2TP netlink interface [ 3.552258] L2TP ethernet pseudowire support (L2TPv3) [ 3.561697] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 3.573886] ThumbEE CPU extension supported. [ 3.582222] Registering SWP/SWPB emulation handler [ 3.591979] cmdline,disp= [ 3.629487] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-02 15:57:33 UTC (143853) [ 3.642264] ths_fetch_sysconfig_para: type err device_used = 1. [ 3.653962] CPU Budget:Register notifier [ 3.661996] CPU Budget:register Success [ 3.669821] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0 [ 3.686496] ALSA device list: [ 3.693559] #0: audiocodec [ 3.700455] #1: sndhdmi [ 4.230061] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=5 [ 7.401281] EXT4-fs (mmcblk0p2): recovery complete [ 7.414302] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 7.427375] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 7.438365] Freeing init memory: 324K [ 7.918278] init: Failed to create pty - disabling logging for job [ 7.929502] init: Temporary process spawn error: No such file or directory [ 7.969205] init: Failed to create pty - disabling logging for job [ 7.981261] init: Temporary process spawn error: No such file or directory [ 8.076671] init: Failed to create pty - disabling logging for job [ 8.088742] init: Temporary process spawn error: No such file or directory [ 8.103885] init: Failed to create pty - disabling logging for job [ 8.116079] init: Temporary process spawn error: No such file or directory [ 8.131416] init: Failed to create pty - disabling logging for job [ 8.143639] init: Temporary process spawn error: No such file or directory [ 8.369951] init: Failed to create pty - disabling logging for job [ 8.381849] init: Temporary process spawn error: No such file or directory [ 8.405900] init: Failed to create pty - disabling logging for job [ 8.417942] init: Temporary process spawn error: No such file or directory [ 8.438212] init: Failed to create pty - disabling logging for job [ 8.454745] init: Temporary process spawn error: No such file or directory [ 8.476736] init: Failed to create pty - disabling logging for job [ 8.489585] init: Temporary process spawn error: No such file or directory [ 8.505562] init: Failed to create pty - disabling logging for job [ 8.523290] init: Failed to create pty - disabling logging for job [ 8.552596] init: Failed to create pty - disabling logging for job [ 8.583415] init: Failed to create pty - disabling logging for job [ 8.599026] init: Failed to create pty - disabling logging for job [ 8.613592] init: Failed to create pty - disabling logging for job [ 8.718529] init: Failed to create pty - disabling logging for job [ 8.746995] init: Failed to create pty - disabling logging for job [ 8.777812] init: Failed to create pty - disabling logging for job [ 8.795384] init: Failed to create pty - disabling logging for job [ 8.814510] init: Failed to create pty - disabling logging for job [ 9.069827] init: Failed to create pty - disabling logging for job [ 9.088864] init: Failed to create pty - disabling logging for job [ 9.208412] init: Failed to create pty - disabling logging for job [ 9.224610] init: Failed to create pty - disabling logging for job [ 9.269189] init: Failed to create pty - disabling logging for job [ 9.284793] init: Failed to create pty - disabling logging for job [ 9.301157] init: Failed to create pty - disabling logging for job [ 9.325083] init: Failed to create pty - disabling logging for job [ 9.344112] init: Failed to create pty - disabling logging for job [ 9.358476] init: Failed to create pty - disabling logging for job [ 9.372694] init: Failed to create pty - disabling logging for job [ 9.394145] init: Failed to create pty - disabling logging for job [ 9.408119] init: Failed to create pty - disabling logging for job What am I still doing wrong, any clues/hints, because no login shell is not shown? Sincerely, Marko
  3. This is all ok, I've created new image, however it is too big and full of things which I do not need. I need minimal low latency (realtime) kernel with full ALSA support and (for testing purposes) ssh so I can test image via LAN. Otherwise, superb script you have written!
  4. Dear Sirs and Madams! I am trying to reconfigure https://github.com/friendlyarm/h3_lichee BSP's kernel via make menuconfig which is producing following .config file: However, If I try to rebuild kernel with instructions taken from wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO#Get_Image_Files, I get following error(s): What did I forgot to include in kernel configuration process? Sincerely, Marko
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines