Jump to content

fcc123

Members
  • Posts

    6
  • Joined

  • Last visited

  1. Ok. Solved I needed to go back to 4.4 kernel (next). And i forgot to install linux-stretch-root-next-udoo. 4.14 kernel is not working for me.
  2. I upgrade Jessie to Stretch and installed (from armbian stretch) linux-image-dev-udoo linux-headers-dev-udoo linux-dtb-dev-udoo linux-u-boot-udoo-dev Unfortunately the kernel is not booting any more from sata: U-Boot SPL 2015.10-armbian (Nov 22 2017 - 17:21:35) U-Boot 2015.10-armbian (Nov 22 2017 - 17:21:35 +0100) CPU: Freescale i.MX6Q rev1.2 at 792 MHz Reset cause: POR Board: UDOO Quad DRAM: 1 GiB MMC: FSL_SDHC: 0 No panel detected: default to HDMI Display: HDMI (1280x720) In: serial Out: serial Err: serial Net: using phy at 6 FEC [PRIME] Hit any key to stop autoboot: 0 ** Bad device size - sata 0 ** AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part SATA Device Info: S/N: B645560128 Product model number: TS256GSSD370 Firmware version: 20140516 Capacity: 500118192 sectors Booting from sata ... 37690 bytes read in 391 ms (93.8 KiB/s) 7120160 bytes read in 164 ms (41.4 MiB/s) Kernel image @ 0x12000000 [ 0x000000 - 0x6ca520 ] ## Flattened Device Tree blob at 18000000 Booting using the fdt blob at 0x18000000 Using Device Tree in place at 18000000, end 1800c339 Starting kernel ... Booting Linux on physical CPU 0x0 Linux version 4.14.0-udoo (root@armbian) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4)) #18 SMP Wed Nov 23:35 CET 2017 CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt: Machine model: Udoo i.MX6 Quad Board Memory policy: Data cache writealloc cma: Reserved 256 MiB at 0x40000000 random: fast init done percpu: Embedded 17 pages/cpu @af61a000 s40396 r8192 d21044 u69632 Built 1 zonelists, mobility grouping on. Total pages: 259840 Kernel command line: console=ttymxc1,115200 root=/dev/sda1 rootwait rw fbmem=24M video=mxcfb0:dev=hdmi,1920x1080M@60,bpp=32 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 759876K/1048576K available (10240K kernel code, 744K rwdata, 2340K rodata, 1024K init, 456K bss, 26556K reserved, 262ma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xc0800000 - 0xff800000 (1008 MB) lowmem : 0x80000000 - 0xc0000000 (1024 MB) pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) modules : 0x7f000000 - 0x7fe00000 ( 14 MB) .text : 0x80008000 - 0x80b00000 (11232 kB) .init : 0x80e00000 - 0x80f00000 (1024 kB) .data : 0x80f00000 - 0x80fba2fc ( 745 kB) .bss : 0x80fc4e74 - 0x8103723c ( 457 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 L2C-310 errata 752271 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 16 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 16 ways, 1024 kB L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001 Switching to timer-based delay loop, resolution 333ns sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x10100000 - 0x10100060 Hierarchical SRCU implementation. smp: Bringing up secondary CPUs ... CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 smp: Brought up 1 node, 4 CPUs SMP: Total of 4 processors activated (24.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 1024 (order: 4, 65536 bytes) xor: measuring software checksum speed arm4regs : 1221.200 MB/sec 8regs : 951.200 MB/sec 32regs : 987.200 MB/sec neon : 894.400 MB/sec xor: using function: arm4regs (1221.200 MB/sec) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 2048 KiB pool for atomic coherent allocations cpuidle: using governor ladder cpuidle: using governor menu CPU identified as i.MX6Q, silicon rev 1.2 vdd1p1: supplied by regulator-dummy vdd3p0: supplied by regulator-dummy vdd2p5: supplied by regulator-dummy vddarm: supplied by regulator-dummy vddpu: supplied by regulator-dummy vddsoc: supplied by regulator-dummy hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. imx6q-pinctrl 20e0000.iomuxc: no fsl,pins and pins property in node /soc/aips-bus@02000000/iomuxc@020e0000/imx6q-udoo/pwm4grp imx6q-pinctrl 20e0000.iomuxc: no fsl,pins and pins property in node /soc/aips-bus@02000000/iomuxc@020e0000/imx6q-udoo/pwm3grp imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver raid6: int32x1 gen() 106 MB/s raid6: int32x1 xor() 151 MB/s raid6: int32x2 gen() 165 MB/s raid6: int32x2 xor() 171 MB/s raid6: int32x4 gen() 181 MB/s raid6: int32x4 xor() 166 MB/s raid6: int32x8 gen() 205 MB/s raid6: int32x8 xor() 152 MB/s raid6: neonx1 gen() 616 MB/s raid6: neonx1 xor() 572 MB/s raid6: neonx2 gen() 658 MB/s raid6: neonx2 xor() 666 MB/s raid6: neonx4 gen() 678 MB/s raid6: neonx4 xor() 700 MB/s raid6: neonx8 gen() 560 MB/s raid6: neonx8 xor() 532 MB/s raid6: using algorithm neonx4 gen() 678 MB/s raid6: .... xor() 700 MB/s, rmw enabled raid6: using neon recovery algorithm mxs-dma 110000.dma-apbh: initialized SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usb_phy_generic 2000000.aips-bus:usbphy_nop1: 2000000.aips-bus:usbphy_nop1 supply vcc not found, using dummy regulator usb_phy_generic 2000000.aips-bus:usbphy_nop2: 2000000.aips-bus:usbphy_nop2 supply vcc not found, using dummy regulator i2c i2c-0: IMX I2C adapter registered i2c i2c-0: can't use DMA, using PIO instead. i2c i2c-1: IMX I2C adapter registered i2c i2c-1: can't use DMA, using PIO instead. i2c i2c-2: IMX I2C adapter registered i2c i2c-2: can't use DMA, using PIO instead. media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource mxc_timer1 VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) FS-Cache: Loaded CacheFiles: Loaded NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. hw perfevents: no interrupt-affinity property for /soc/pmu, guessing. hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available Initialise system trusted keyrings workingset: timestamp_bits=14 max_order=18 bucket_order=4 zbud: loaded FS-Cache: Netfs 'nfs' registered for caching NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered nfs4filelayout_init: NFSv4 File Layout Driver Registering... fuse init (API version 7.26) Key type asymmetric registered Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) io scheduler mq-deadline registered io scheduler kyber registered imx-weim 21b8000.weim: Driver registered. imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2 imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 70, base_baud = 5000000) is a IMX console [ttymxc1] enabled 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 71, base_baud = 5000000) is a IMX brd: module loaded loop: module loaded ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024 ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480 ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000 ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst scsi host0: ahci-imx ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 81 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator pps pps0: new PPS source ptp0 libphy: fec_enet_mii_bus: probed fec 2188000.ethernet eth0: registered PHC device 0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-mxc: Freescale On-Chip EHCI Host driver usbcore: registered new interface driver usb-storage Has anybody an idea? I tried also booting 4.4 kernel. Same result.... Is this an u-boot issue? Thanks. kind regards Claus
  3. My udoo quad is the most important machine at home Sent from my Redmi Note 4 using Tapatalk
  4. Solved with installing flash-kernel from here https://packages.debian.org/sid/armhf/flash-kernel/download
  5. I migrated my system from Wheezy from udoo.org which installed long ago to Armbian Jessie. The main stuff is working and i also manged to boot the new kernel (u-boot config). When i do apt-get upgrade the system always want to upgrade the initrd file. I get the following error messages: update-initramfs: Generating /boot/initrd.img-4.4.51-udoo Warning: root device rootfs does not exist Press Ctrl-C to abort build, or Enter to continue Warning: /sbin/fsck.rootfs doesn't exist, can't install to initramfs, ignoring. update-initramfs: Converting to u-boot format Unsupported platform. run-parts: /etc/initramfs/post-update.d//flash-kernel exited with return code 1 Does anybody has an idea why is says Unsupported platform?
×
×
  • Create New...