cippo

Members
  • Content Count

    4
  • Joined

  • Last visited

 Content Type 

Forums

Member Map

Store

Crowdfunding

Raffles

Applications

Everything posted by cippo

  1. Cool! I did not think about it.. now my hostapd works, thank you!
  2. Hello, I try to use the Armbian build framework to generate a debian package with modified kernel, generated packages.deb works fine, but the compiled kernel is everytime the default and not mine. I use: ./compile.sh KERNEL_CONFIGURE=yes KERNEL_KEEP_CONFIG=no and then load my kernel_config but the result is everytime the default kernel, the .config become change then my .config I also try to bypass the problem by adding immutable attribute to my personalized .config (chattr +i ./.config) but the script crash: │ /home/maxi/sources/linux-sun8i/sun8i/scripts/kconfig/Makefile:33: recipe for target 'silentoldconfig' failed │ │ make[2]: *** [silentoldconfig] Error 1 │ │ /home/maxi/sources/linux-sun8i/sun8i/Makefile:493: recipe for target 'silentoldconfig' failed │ │ make[1]: *** [silentoldconfig] Error 2 │ │ make: *** No rule to make target 'include/config/auto.conf', needed by 'include/config/kernel.release'. Stop. Thankyou for your support (and sorry for my bad english)
  3. With a distro downloaded from orangepi.org (originary for opiplus) hostapd work fine.. It use an older kernel version without "new" module mac80211 root@orangepiplus:~# uname -a Linux orangepiplus 3.4.39 #29 SMP PREEMPT Mon Nov 7 11:15:11 CST 2016 armv7l GNU/Linux root@orangepiplus:~# lsmod Module Size Used by xradio_wlan 230792 0 root@orangepiplus:~# modinfo /lib/modules/3.4.39/xradio_wlan.ko filename: /lib/modules/3.4.39/xradio_wlan.ko alias: xradio_core license: GPL description: XRadioTech WLAN driver core author: XRadioTech srcversion: EE504CDAD99C9B5CF34A68C depends: intree: Y vermagic: 3.4.39 SMP preempt mod_unload modversions ARMv7 p2v8 parm: macaddr:First MAC address (charp) root@orangepiplus:~# hostapd /etc/hostapd/hostapd.conf Configuration file: /etc/hostapd/hostapd.conf Using interface wlan1 with hwaddr 48:eb:26:65:8f:47 and ssid "test" wlan1: interface state UNINITIALIZED->ENABLED wlan1: AP-ENABLED ^Croot@orangepiplus:~# root@orangepiplus:~# hostapd /etc/hostapd/hostapd.conf & [1] 2017 root@orangepiplus:~# Configuration file: /etc/hostapd/hostapd.conf Using interface wlan1 with hwaddr 48:eb:26:65:8f:47 and ssid "test" wlan1: interface state UNINITIALIZED->ENABLED wlan1: AP-ENABLED root@orangepiplus:~# iwconfig gre0 no wireless extensions. lo no wireless extensions. tunl0 no wireless extensions. wlan1 IEEE 802.11bgn Mode:Master Frequency:2.412 GHz Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on sit0 no wireless extensions. eth0 no wireless extensions. ip6tnl0 no wireless extensions. p2p0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on This orangepi.org distros are full of problems and board become very hot.. I want to try to use armbian, but I don't understand what is the problem with hostapd, any ideas?
  4. Hello, I have a OPI zero, I want to use it as access point, but when I start hostapd appears this message: root@orangepizero:~# hostapd /etc/hostapd/hostapd.conf -dd random: Trying to read entropy from /dev/random Configuration file: /etc/hostapd/hostapd.conf nl80211: Could not add multicast membership for vendor events: -2 (No such file or directory) rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 nl80211: Supported cipher 00-0f-ac:1 nl80211: Supported cipher 00-0f-ac:5 nl80211: Supported cipher 00-0f-ac:2 nl80211: Supported cipher 00-0f-ac:4 nl80211: Using driver-based off-channel TX nl80211: Supports Probe Response offload in AP mode nl80211: Use separate P2P group interface (driver advertised support) nl80211: interface wlan0 in phy phy1 nl80211: Set mode ifindex 4 iftype 3 (AP) nl80211: Setup AP(wlan0) - device_ap_sme=0 use_monitor=0 nl80211: Subscribe to mgmt frames with AP handle 0xb7ba98d8 nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0xb7ba98d8 match= nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ) nl_handle=0xb7ba98d8 match= nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ) nl_handle=0xb7ba98d8 match= nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC) nl_handle=0xb7ba98d8 match= nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH) nl_handle=0xb7ba98d8 match= nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0xb7ba98d8 match= nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress) nl80211: Register frame match - hexdump(len=0): [NULL] nl80211: Could not configure driver mode nl80211: deinit ifname=wlan0 disabled_11b_rates=0 nl80211: Remove monitor interface: refcount=0 nl80211: Remove beacon (ifindex=4) netlink: Operstate: ifindex=4 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) nl80211: Set mode ifindex 4 iftype 2 (STATION) nl80211: Teardown AP(wlan0) - device_ap_sme=0 use_monitor=0 nl80211 driver initialization failed. hostapd_interface_deinit_free(0xb7ba82d8) hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1 hostapd_interface_deinit(0xb7ba82d8) wlan0: interface state UNINITIALIZED->DISABLED hostapd_bss_deinit: deinit bss wlan0 wlan0: AP-DISABLED hostapd_cleanup(hapd=0xb7ba8e60 (wlan0)) hostapd_free_hapd_data: Interface wlan0 wasn't started hostapd_interface_deinit_free: driver=(nil) drv_priv=(nil) -> hapd_deinit hostapd_interface_free(0xb7ba82d8) hostapd_interface_free: free hapd 0xb7ba8e60 hostapd_cleanup_iface(0xb7ba82d8) hostapd_cleanup_iface_partial(0xb7ba82d8) hostapd_cleanup_iface: free iface=0xb7ba82d8 I use a simple config file like this: root@orangepizero:~# cat /etc/hostapd/hostapd.conf # Wireless interface interface=wlan0 driver=nl80211 ssid=test channel=1 I use: Armbian_5.24_Orangepizero_Debian_jessie_3.4.113 with hostapd v2.5