Jump to content

sandwern

Members
  • Posts

    2
  • Joined

  • Last visited

  1. Problem solved by installation of firmware-ralink package (dmesg helped to solve the issue)!
  2. Hi and Happy new year! I'm not so fluent in English, so please excuse me. I have Lamobo R-1 with HW mod (RT5572) and the main problem is that hostapd is giving error message at start: root@lamobo-r1:~# hostapd -d /etc/hostapd/hostapd.conf random: Trying to read entropy from /dev/random Configuration file: /etc/hostapd/hostapd.conf rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0 nl80211: Supported cipher 00-0f-ac:1 nl80211: Supported cipher 00-0f-ac:5 nl80211: Supported cipher 00-0f-ac:2 nl80211: Supported cipher 00-0f-ac:4 nl80211: Supported cipher 00-0f-ac:10 nl80211: Supported cipher 00-0f-ac:8 nl80211: Supported cipher 00-0f-ac:9 nl80211: Using driver-based off-channel TX nl80211: interface wlan0 in phy phy0 nl80211: Set mode ifindex 3 iftype 3 (AP) nl80211: Setup AP(wlan0) - device_ap_sme=0 use_monitor=0 nl80211: Subscribe to mgmt frames with AP handle 0x7f6c58d0 nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0x7f6c58d0 match= nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ) nl_handle=0x7f6c58d0 match= nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ) nl_handle=0x7f6c58d0 match= nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC) nl_handle=0x7f6c58d0 match= nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH) nl_handle=0x7f6c58d0 match= nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7f6c58d0 match= nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x7f6c58d0 match= Could not set interface wlan0 flags (UP): Resource temporarily unavailable nl80211: Could not set interface 'wlan0' UP nl80211: deinit ifname=wlan0 disabled_11b_rates=0 nl80211: Remove monitor interface: refcount=0 nl80211: Remove beacon (ifindex=3) netlink: Operstate: ifindex=3 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP) nl80211: Set mode ifindex 3 iftype 2 (STATION) nl80211: Teardown AP(wlan0) - device_ap_sme=0 use_monitor=0 nl80211: Unsubscribe mgmt frames handle 0xf7e4d059 (AP teardown) nl80211 driver initialization failed. hostapd_interface_deinit_free(0x7f6c42d8) hostapd_interface_deinit_free: num_bss=1 conf->num_bss=1 hostapd_interface_deinit(0x7f6c42d8) wlan0: interface state UNINITIALIZED->DISABLED hostapd_bss_deinit: deinit bss wlan0 wlan0: AP-DISABLED hostapd_cleanup(hapd=0x7f6c4e98 (wlan0)) hostapd_free_hapd_data: Interface wlan0 wasn't started hostapd_interface_deinit_free: driver=(nil) drv_priv=(nil) -> hapd_deinit hostapd_interface_free(0x7f6c42d8) hostapd_interface_free: free hapd 0x7f6c4e98 hostapd_cleanup_iface(0x7f6c42d8) hostapd_cleanup_iface_partial(0x7f6c42d8) hostapd_cleanup_iface: free iface=0x7f6c42d8 uname -aLinux lamobo-r1 4.7.3-sunxi #26 SMP Wed Sep 14 19:50:18 CEST 2016 armv7l GNU/Linux (this is Armbian_5.20_Lamobo-r1_Debian_jessie_4.7.3.img) Thank you very much for any information how to solve this issue!
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines