Kaju666

ofcourse i tried this but somehow it not works, instruction from github works.

Ok i make this working It's easier that described here First i downloaded latest armbian 5.20 and installed image to sdcard and connected LAN cable(do not plug wifi adpater). Then after login i made commands below: sudo apt-get update sudo apt-get upgrade sudo apt-get install git build-essential dkms network-manager git clone https://github.com/pvaret/rtl8192cu-fixes.git sudo dkms add ./rtl8192cu-fixes sudo dkms install 8192cu/1.10 sudo depmod -a sudo cp ./rtl8192cu-fixes/blacklist-native-rtl8192.conf /etc/modprobe.d/ sudo reboot Then i plug in my NETIS adapter (RTL8188CUS) and typed: nmcli -a d wifi connect Connected to my WIFI, unplugged LAN, and hardreset device. Thats it

Both without any wlan0. https://screenpresso.com/=SmUSd https://screenpresso.com/=W1OHd

Hello i have some problems and i don't know why i don't see wlan0 in interfaces. i make everything like in instruction + downloaded 8192cu bin driver and put in lib/firmware/rtlwifi dmesg: Other commands: