CursedPotato

2x - PiHole DNS servers 1x - Octoprint 3d Printer server, but I'm going to migrate to an orange pi PC as it has more native usb lcd support. 1x - Portable Wifi to Lan Bridge with MAC address cloning or randomizer 1x - Cups print server.

Raspberry Pi Zero's operating temp range is 0°C to 70°C The H2/H3 has the same safe operating range. My Zero's are running around 50C in an open case with a heatsink on. If I use an enclosed case it jumps to 57C for a high load (webcam server/octoprint) If you're worried about it add a fan, but it's a safe temperature.

Anyone know why I cant get serial out of those three pins? Is it not enabled by default? Running Armbian_5.24_Orangepizero_Ubuntu_xenial_3.4.113 Below is my dmesg output. dmesg | grep tty [ 0.000000] Kernel command line: root=UUID=7dd0c931-6f7e-4fbd-83f6-544d0e1b2765 rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 cgroup_enable=memory swapaccount=1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=7 ubootpart=4f870cf7-01 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 [ 0.000000] console [tty1] enabled [ 0.994431] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI [ 1.131383] console [ttyS0] enabled [ 2.681640] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI [ 2.697283] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI [ 10.071093] systemd[1]: Created slice system-serial\x2dgetty.slice.

Does this mean we can use SPI based LCD's? or is that something else