3645_59*

I don't have brcm40183 on the cubietruck, what can i do ? When i'm testing a lot of things which i have see on the internet, i have doing the command "hciattach /dev/ttyS2 any" and after the command "hciconfig -a" which give me the result : hci0: Type: BR/EDR Bus: UART BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 DOWN INIT RUNNING RX bytes:0 acl:0 sco:0 events:0 errors:0 TX bytes:8 acl:0 sco:0 commands:2 errors:0 Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Packet type: DM1 DH1 HV1 Link policy: Link mode: SLAVE ACCEPT But with "hcitool dev", i don't have any device. How can i have the device ready ? Maybe it's because the bt hci0 don't have BD ADRESS

Many many thanks for this help. I have an another problem with the bluetooth always with the same configuration. When i start the cubietruck : root@cubietruck:~# systemctl status bluetooth ◠bluetooth.service - Bluetooth service Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled) Active: inactive (dead) Docs: man:bluetoothd(8) After that i restart the bluetooth with "/etc/init.d/bluetooth restart" And after when i check the status : ◠bluetooth.service - Bluetooth service Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled) Active: active (running) since Sat 2017-01-21 00:25:47 CET; 2s ago Docs: man:bluetoothd(8) Main PID: 1893 (bluetoothd) Status: "Running" CGroup: /system.slice/bluetooth.service └─1893 /usr/lib/bluetooth/bluetoothd But when i do "hcitool dev", i don't have any device Can you help me again please ?

Hi, I run a Linux Armbian_5.24_Cubietruck_Debian_jessie_4.8.15 on a Cubietruck with the kernel on version 4.8.15-sunxi. When i want to enable the wifi module, this don't work. I have see a response on https://forum.armbian.com/index.php/topic/252-cubietrack-wifi-bug-hostapd-bcmdhd/ so i do "modprobe brcmfmac" which return any message. But after that, i can't use the wifi. When i do an ifconfig, i see only eth0, bond0 an lo butno wlan0. Can you help me to use the wifi on my cubietruck ? PS : Sorry for that bad english, i'm a french user which don't speak english very well.