Fred Munden

I would like to setup NTPD with PPS but seems GPIO PPS is not yet supported. Anyone working on this?

install linux-u-boot-bananapipro-next and now sata is working $ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 477G 0 disk └─sda1 8:1 0 477G 0 part mmcblk0 179:0 0 7.4G 0 disk └─mmcblk0p1 179:1 0 7.3G 0 part / Thanks to all who sorted this out. Fred

I installed bananian and the sata was deteched, using the same setup wrt to power supply and sata drive, interesting. uname -a Linux bananapi 3.4.111-bananian #5 SMP PREEMPT Fri Mar 25 17:24:42 UTC 2016 armv7l GNU/Linux # dmesg | grep scsi [ 1.695948] scsi0 : sw_ahci_platform [ 3.755632] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 EXM0 PQ : 0 ANSI: 5 [ 15.887345] sd 0:0:0:0: Attached scsi generic sg0 type 0 # lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 477G 0 disk └─sda1 8:1 0 477G 0 part mmcblk0 179:0 0 1.9G 0 disk ├─mmcblk0p1 179:1 0 20M 0 part └─mmcblk0p2 179:2 0 1.8G 0 part / not sure this is a power supply issue. Thanks Fred

sata port does not work, seeing the following error in dmesg [ 3.901254] ahci-sunxi 1c18000.sata: PHY power up failed. [ 3.901313] ahci-sunxi: probe of 1c18000.sata failed with error -5 $ uname -a Linux madmax 4.9.5-sunxi #1 SMP Fri Jan 20 22:01:51 CET 2017 armv7l GNU/Linux using a 2.4 amp power supply and supplied sata cable. Thanks for any help Fred