Jump to content

joeatx

  • Posts

    2
  • Joined

  • Last visited

  1. Hi jilossoju and Igor, Many thanks for the tips, I'll try it next weekend and with success I will report
  2. Hi all, i have the A38X MicroSom with emmc (yes bad idea) with ClearFog Base, and buy me an 64GB M.2 SSD for i Think easy way to dd a img on emmc. I have wait a long time for my Hardware and now musst be more time invest for my first boot up. I've been asking for concrete: on http://wiki.solid-run.com/doku.php?id=products:a38x:software:development:u-boo it is written: What is my toolchain prefix, this: arm-none-linux-gnueabi- ? I have my host linux pc, with debian x86 / amd64, ARM compatible? if so which packages are required for it, with add Architecture armhf? Is the right packages for the cross-compiler: gcc-arm-linux-gnueabihf? And in which repository do I find it? make u-boot.sata Is clear to me. the bootdevice can be chosen by using the DIP switch, Is clear to me to. dd if=u-boot.sata of=/dev/sdX bs=512 seek=1 or must be set another seek for my M.2 SSD? Please Please help me for my first boot Many Thanks Edit: I have now more information, this i'will try it and give a answer it if work Edit2: I have copy this with dd if=Armbian_5.25_Clearfogbase_Debian_jessie_default_4.4.45.img of=/dev/sdc bs=4M; sync but not work , this is my output: This is my SSD: What is the problem and how i can fix it? Edit3 I have read a lot more and have come to the conclusion that the only one is the hard way see this at last post from "Pontus Jon Jensen Karlsson" in this Thread
×
×
  • Create New...