Hi
I have a problem with USB tethering on my Armbian device (Nanopi Neo). It has static IP assigned to eth0 and I connect to it via ssh from another computer.
My /etc/network/interfaces file is:
auto eth0
allow-hotplug eth0
iface eth0 inet static
address 192.168.0.170
netmask 255.255.255.0
gateway 192.168.0.1
dns-nameservers 192.168.0.1
When I connect android tethering device to the USB on Armbian and run ifconfig -a I get
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.170 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fe80::f819:6eff:fe30:1a04 prefixlen 64 scopeid 0x20<link>
ether fa:19:6e:30:1a:04 txqueuelen 1000 (Ethernet)
RX packets 1930 bytes 168366 (164.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1895 bytes 247095 (241.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 38
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 140 bytes 14942 (14.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 140 bytes 14942 (14.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
usb0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.182.135 netmask 255.255.255.0 broadcast 192.168.182.255
inet6 fe80::9c58:5c52:4522:6467 prefixlen 64 scopeid 0x20<link>
ether 66:d5:8c:d4:03:e9 txqueuelen 1000 (Ethernet)
RX packets 30 bytes 3021 (2.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 35 bytes 4580 (4.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
It discovers usb0 but it assigns 192.168.182.135 and I have no internet access. Probably my interface settings are wrong. I'll be grateful for any help.
