for1133

Linux cubietruck 3.4.113-sun7i version. The touchscreen doesn't work. Information on a touchscreen. Response to the command "dmesg": ... [ 12.190584] input: Touch Touch Device T1 as /devices/platform/sw-ehci.2/usb4/4-1/4-1.3/4-1.3:1.0/input/input2 [ 12.205405] hid-multitouch 0003:1FF7:0013.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [Touch Touch Device T1] on usb-sw-ehci-1.3/input0 [ 12.211921] usbcore: registered new interface driver eucr [ 12.232911] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 12.237727] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 12.298823] input: Touch Touch Device T1 as /devices/platform/sw-ehci.2/usb4/4-1/4-1.3/4-1.3:1.1/input/input3 [ 12.351571] hid-multitouch 0003:1FF7:0013.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Touch Touch Device T1] on usb-sw-ehci-1.3/input1 ... [ 3052.626051] hid-multitouch 0003:1FF7:0013.0001: can't reset device, sw-ehci-1.3/input0, status -71 [ 3052.648371] hid-multitouch 0003:1FF7:0013.0001: can't reset device, sw-ehci-1.3/input0, status -71 [ 3052.670734] hid-multitouch 0003:1FF7:0013.0001: can't reset device, sw-ehci-1.3/input0, status -71 [ 3052.692970] hid-multitouch 0003:1FF7:0013.0001: can't reset device, sw-ehci-1.3/input0, status -71 [ 3052.706853] usb 4-1.3: USB disconnect, device number 4 [ 3053.053445] usb 4-1.3: new full-speed USB device number 6 using sw-ehci [ 3053.205528] input: Touch Touch Device T1 as /devices/platform/sw-ehci.2/usb4/4-1/4-1.3/4-1.3:1.0/input/input4 [ 3053.219532] hid-multitouch 0003:1FF7:0013.0003: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [Touch Touch Device T1] on usb-sw-ehci-1.3/input0 [ 3053.236939] input: Touch Touch Device T1 as /devices/platform/sw-ehci.2/usb4/4-1/4-1.3/4-1.3:1.1/input/input5 [ 3053.251759] hid-multitouch 0003:1FF7:0013.0004: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Touch Touch Device T1] on usb-sw-ehci-1.3/input1 [ 3176.434287] hid-multitouch 0003:1FF7:0013.0003: can't reset device, sw-ehci-1.3/input0, status -71 ... [15061.406646] input: Touch Touch Device T1 as /devices/platform/sw-ehci.2/usb4/4-1/4-1.3/4-1.3:1.1/input/input25 [15061.419502] hid-multitouch 0003:1FF7:0013.0018: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Touch Touch Device T1] on usb-sw-ehci-1.3/input1 Response to the command "lsusb -tv": /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=sw-ohci/1p, 12M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=sw-ehci/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 480M |__ Port 3: Dev 15, If 0, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 3: Dev 15, If 1, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 4: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=sw-ohci/1p, 12M |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=sw-ehci/1p, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=sw_hcd_host0/1p, 480M Response to the command "lsusb -v": ... Bus 004 Device 015: ID 1ff7:0013 CVT Electronics.Co.,Ltd CVTouch Screen (HID) ... Response to the command "lsmod": Module Size Used by bnep 14360 2 cpufreq_userspace 3540 0 sg 23918 0 keucr 58671 0 hid_multitouch 7719 0 mali 112222 0 ump 61778 1 mali ap6210 623704 0 sunxi_ir 4044 0 hidp 17740 0 rfcomm 58820 2 hci_uart 25074 1 bluetooth 265449 27 bnep,hidp,hci_uart,rfcomm ++++++++++++++++++++++++++++++++++++++ Linux cubietruck 4.9.11-sunxi version. The touchscreen works. Information on a touchscreen. Response to the command "dmesg": ... [ 5.595234] usb 2-1.3: Product: Touch Device T1 [ 5.595240] usb 2-1.3: Manufacturer: Touch [ 5.595245] usb 2-1.3: SerialNumber: WГїnq\xffffffc2\xffffff84WH2g28 [ 5.617178] input: Touch Touch Device T1 as /devices/platform/soc@01c00000/1c1c000.usb/usb2/2-1/2-1.3/2-1.3:1.1/0003:1FF7:0013.0004/input/input3 [ 5.623122] hid-generic 0003:1FF7:0013.0004: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Touch Touch Device T1] on usb-1c1c000.usb-1.3/input1 ... [ 11.903343] input: Touch Touch Device T1 as /devices/platform/soc@01c00000/1c1c000.usb/usb2/2-1/2-1.3/2-1.3:1.0/0003:1FF7:0013.0003/input/input5 [ 11.932020] hid-multitouch 0003:1FF7:0013.0003: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Touch Touch Device T1] on usb-1c1c000.usb-1.3/input0 ... Response to the command "lsusb -tv": /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=musb-hdrc/1p, 480M /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M |__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 480M |__ Port 3: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 3: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M |__ Port 4: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M Response to the command "lsusb -v": ... Bus 002 Device 004: ID 1ff7:0013 CVT Electronics.Co.,Ltd CVTouch Screen (HID) Response to the command "lsmod": Module Size Used by fuse 62777 3 ir_xmp_decoder 2583 0 ir_mce_kbd_decoder 3454 0 ir_sharp_decoder 1921 0 ir_sanyo_decoder 2113 0 ir_sony_decoder 1938 0 ir_jvc_decoder 1936 0 ir_rc6_decoder 2429 0 ir_nec_decoder 2365 0 ir_rc5_decoder 2064 0 bnep 8221 2 hci_uart 13285 1 snd_soc_simple_card 4330 1 snd_soc_simple_card_utils 2374 1 snd_soc_simple_card snd_soc_spdif_tx 1936 1 sun4i_codec 10104 3 sun4i_spdif 4004 2 hid_multitouch 8053 0 ir_lirc_codec 4088 0 lirc_dev 6245 1 ir_lirc_codec snd_soc_core 97876 5 snd_soc_spdif_tx,sun4i_codec,snd_soc_simple_card_utils,sun4i_spdif,snd_soc_simple_card snd_pcm_dmaengine 2770 1 snd_soc_core snd_pcm 57757 2 snd_pcm_dmaengine,snd_soc_core pwm_sun4i 4180 0 snd_timer 14809 1 snd_pcm sunxi_cir 3159 0 nvmem_sunxi_sid 1967 0 snd 35783 9 snd_timer,snd_soc_core,snd_pcm soundcore 858 1 snd nvmem_core 7158 1 nvmem_sunxi_sid sun4i_ts 3414 0 evdev 9412 8 input_leds 2292 0 sun4i_ss 13213 0 cpufreq_dt 2920 0 uio_pdrv_genirq 2780 0 uio 6272 1 uio_pdrv_genirq bonding 82855 0 hidp 10350 0 rfcomm 25650 14 bluetooth 247788 39 hidp,hci_uart,bnep,rfcomm brcmfmac 144129 0 brcmutil 4189 1 brcmfmac cfg80211 337391 1 brcmfmac rfkill 8383 6 bluetooth,cfg80211 uas 10265 0 pwrseq_simple 2066 1 realtek 2583 0 From this information it is visible that the touchscreen in system is defined. The system tries to drop it, but can't. Obviously in a kernel the necessary modules aren't set.

USB-touchscreen doesn't work with Cubietruck 3.4.113. The touchscreen well works with versions 4.9.xxx, but doesn't work with 3.4.xxx. I connected the monitor 1920*1080 and a touchscreen to Cubietruck. Cubietruck smartly works in video browse mode, but the mouse and the keypad aren't always convenient for control. Especially at night, too loud clicks. I pasted a touchscreen on the monitor. It works with versions 4.xxx, but video doesn't work. And with versions 3.xxx on the contrary. What I should make that the touchscreen worked with version 3.4.113?