@lex Thank you very much for your work.
Bluetooth, GbE, WiFi and eMMC are working fine.
Sometimes it does not boot. Neither from eMMC or SD. It seems to depend on the USB Devices. If I do have a USB Mouse and Keyboard connected it does not boot in most cases. The monitor turns into standby. Capslock / Numlock not working, not reachable via SSH.
When holding down the uboot button it works most of the time. Without the mouse it seems to work always. Powersupply has 3A.
The Network LEDs seem not to work correctly. One is flashing yellow in regular interval. I guess one should flash depending on traffic and the other one should be on steady to show link.
But the switch shows 1000M.
With help of your Image I managed to install ArchLinuxARM to the eMMC. I had to copy /lib/firmware/ap6212 from your image as it is not part of the ArchLinuxARM firmware package. Additionally I had to copy the modules.conf to /etc/modules-load.d.
The only thing not working with ArchLinuxARM is bluetooth.
Somehow "hciattach /dev/ttyS1 any" is running in your image but I have not found in which config file this is configured. If I run this command manually with my ArchLinuxARM image it does add a hci0 device but does not find any bluetooth devices and MAC is AA:AA:AA:AA:AA:AA.
I did also try to use the mainline kernel, as it works fine on Lamobo-R1, and it contains a dtbs for the BPi-M64. But it seems that the Kernel-Image has a different format (file command shows msdos executable) so I guess I would need some tweaks to uboot?
