Jump to content

pille

Members
  • Posts

    11
  • Joined

  • Last visited

  1. Okay, there is light at the end of the tunnel. Had to manually set the output with a10disp. Fortunately that worked over ssh and it remembers the last setting.
  2. Hello! Now it seems to work. Had to flash Android. Over that I had to flash the ct-lubuntu image and then the nand-sata-install succeeded. After wards I had to repair the file system. I installed twice and had both times a corrupt filesystem. But now it works.
  3. I think that LiveSuit for Mac is crap. I used a Windows PC and I could flash the Android image. Then it booted from nand. I set up an Ubuntu VM and created the Armbian image from your repo. Nice so far. Had no problems. Then I put the image on a sd card and it booted. I startet the nand-sata-install script, waited for it to complete, removed the sd card and powered back up. Black screen, nothing happens. I'll try the lubuntu way next.
  4. It is an older 5:4 VGA monitor with a 1280x1024 resolution. The board is powered over the power plug next to the ethernet port. Network cable is attached and a DHCP server is running. I am still waiting. I just leave the monitor on. It says that the signal is out of range. I also tried a 16:9 VGA Monitor with 1920x1080 and a 16:9 HDMI monitor with 1680x900.
  5. I should add, that everything worked with the preinstalled android image. And it worked with the main line. While I want to use the nand to boot from, I cannot use the main line.
  6. I can't even flash that image. Neither with the LiveSuit nor with dd. Commenting out formatnand doesn't help either. I can see it being written on the nand when I mount the devices, but it does not boot. But that shouldn't be your problem. It is the manufacturers problem for the inconsistent information. Now I will try to create my own image. Maybe I have more luck with that.
  7. No chance. "Image file invalid" It is the LiveSuit 3.05 for Mac.
  8. Okay. I tried it with the ct-lubuntu-server-nand-v2.0.img. I hope that was right. "Image file invalid". I'll try the desktop image.
  9. Sorry for hijacking this thread, but although I changed the script and nand1 is written now, it won't boot from nand. It is just sitting there with the power led on. No video output or led activity.
  10. Hello! I wrote the legacy image to a sd card and put it into the card slot. I can see something like diagnostic message and then "starting kernel". After that there is no video output. Neither over VGA nor over HDMI. Is that wanted? I tried 3 different monitors, but no chance. I can connect via ssh after a few minutes, but using a monitor and a screen would help, when there is no network. What am I doing wrong? Greetings, Pille
  11. pille

    Forum upgrade

    Hello! The upgrade was just in that moment done, when I tried to sign up. Now the signup, except for the Facebook method, does not work. The security thingy does not show up.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines