unmesh

@Werner
 
your point about not struggling through support issues is a good one and I will take a look at the units at your link. 
 
Thanks
 
P.S. The delayed response is because I'm new and am only allowed to make one post a day

Wanted to add that I purchased a HDMI to DVI cable and hooked up the T95 Mini to a 1920x1080 PC monitor after reversing the change to /boot/extlinux/extlinux.conf
 
Everything works fine now.
 
Hopefully this extract from dmesg output means the flash is eMMC and I don't have to open the box to check :-)
 
[    5.007627] mmc1: new high speed MMC card at address 0001
[    5.031035] mmcblk1: mmc1:0001 MAG2GC 14.6 GiB
[    5.035956] mmcblk1boot0: mmc1:0001 MAG2GC partition 1 4.00 MiB
[    5.042251] mmcblk1boot1: mmc1:0001 MAG2GC partition 2 4.00 MiB