Jump to content

miha

Members
  • Posts

    9
  • Joined

  • Last visited

Posts posted by miha

  1. Installed Welcome to ARMBIAN 5.37.180110 nightly Debian GNU/Linux 9 (stretch) 4.14.13-sunxi

     

    Now trying to get bluetooth working, have two RuuviTags to connect

     

    root@nanopiair:~# systemctl status ap6212-bluetooth
    ● ap6212-bluetooth.service - LSB: Patch firmware for ap6212 adapter
       Loaded: loaded (/etc/init.d/ap6212-bluetooth; generated; vendor preset: enabled)
       Active: failed (Result: exit-code) since Thu 2018-01-11 16:31:55 UTC; 7min ago
         Docs: man:systemd-sysv-generator(8)
      Process: 464 ExecStart=/etc/init.d/ap6212-bluetooth start (code=exited, status=1/FAILURE)

    Jan 11 16:31:55 nanopiair systemd[1]: Starting LSB: Patch firmware for ap6212 adapter...
    Jan 11 16:31:55 nanopiair ap6212-bluetooth[464]: sh: echo: I/O error
    Jan 11 16:31:55 nanopiair ap6212-bluetooth[464]: Can't get port settings: Input/output error
    Jan 11 16:31:55 nanopiair ap6212-bluetooth[464]: Can't initialize device: Input/output error
    Jan 11 16:31:55 nanopiair ap6212-bluetooth[464]: Can't get device info: No such device
    Jan 11 16:31:55 nanopiair systemd[1]: ap6212-bluetooth.service: Control process exited, code=exited status=1
    Jan 11 16:31:55 nanopiair systemd[1]: Failed to start LSB: Patch firmware for ap6212 adapter.
    Jan 11 16:31:55 nanopiair systemd[1]: ap6212-bluetooth.service: Unit entered failed state.
    Jan 11 16:31:55 nanopiair systemd[1]: ap6212-bluetooth.service: Failed with result 'exit-code'.
     

     

  2. Added following line to /etc/rc.local, just above the exit 0:

    nmcli dev wifi connect "mySSID" password "mypwd"

     

    And device connects to wifi automatically after reboot. More elegant solution is needed but this is good for now. I need to figure out also how to connect two different wifi's, depending on location home/work automatically. Plan is to use nanopi with batteries as movable air quality measuring station. Thank Igor for you help!

  3. Well, still no success. Added to /etc/cron.d/armbian-updates line

    @reboot root /root/script.sh

     

    And script has permissions 755 and content:

    #!/bin/bash
    touch /root/file
    df >> /root/file
    ifconfig -a >> /root/file
    ls -R / >>/root/file
    cat /proc/cpuinfo >>/root/file
    cat /proc/meminfo >>/root/file
    lsusb -vvv >>/root/file

     

    Booted nanopi up with sdcard and I let nanopi running  hours before switching power off. The file is not created.

     

    is it so that crond is not enabled on 1st boot? I'll need to check this. I may need to test with another sdcard although I think that it's not the problem because opi+2 and raspi3 boots up w/o issues on that card.

     

    EDIT:

    Changed script to:

     

    #!/bin/bash
    /bin/touch /root/file
    /bin/df >> /root/file
    /sbin/ifconfig -a >> /root/file
    /bin/ls -R / >>/root/file
    /bin/cat /proc/cpuinfo >>/root/file
    /bin/cat /proc/meminfo >>/root/file
    /usr/bin/lsusb -vvv >>/root/file

  4. I have problem, I am not able to get console working to access my nanopi neo air. PSU is not issue, opi+2 runs with same power w/o issues. Sdcard is not problem either. Tested with more than one image and based on how onboard leds behaves, i believe that system boots up ok. Now the question: How to modify image on sdcard so that it connects to my WIFi (WPA2-PSK) on boot automatically making ssh to nano working? Or should I mount image, before writing to sdcard, and do the needed changes inside mounted image? What and how? Thanks!

  5. Hi,

     

    I wrote Armbian_5.25_Cubietruck_Ubuntu_xenial_default_3.4.113.img to sd-card and booted my cubietruck from the card.  ssh in and user creation followed by reboot (rootfs resize) After that i performed apt get update&upgrade and started nand-sata-install.

     

    I have SSD hooked to CubieTruck and my goal is boot system from onboard memory (with 3.4-kernel nand is available but not with 4.9...) and roots to /dev/sda1. This was how previous setup was. sd-card slot is broken, I need to use tape to keep card on the reader, another reason why boot from nand would be nice.

     

    However, when i start and-sata-install, following is displayed on console:

    [  112.701170] Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
    [  112.710146] Dev Sunxi softw311 nand magic does not match for MBR 2:         
    [  112.719450] Dev Sunxi softw311 nand magic does not match for MBR 3:         
    [  112.725528] Dev Sunxi softw311 nand magic does not match for MBR 4:         
    [  112.733262] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
    [  112.743553] Dev Sunxi softw411 nand: part 1, start 65536, size 65536
    [  112.749216] Dev Sunxi softw411 nand: part 2, start 131072, size 14909440
    [  112.751266]  nand: nand1 nand2
    [  112.764254] Dev Sunxi softw311 nand magic does not match for MBR 1: softw411
    [  112.770268] Dev Sunxi softw311 nand magic does not match for MBR 2:         
    [  112.776448] Dev Sunxi softw311 nand magic does not match for MBR 3:         
    [  112.782522] Dev Sunxi softw311 nand magic does not match for MBR 4:         
    [  112.790258] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present.
    [  112.800339] Dev Sunxi softw411 nand: part 1, start 65536, size 65536
    [  112.806096] Dev Sunxi softw411 nand: part 2, start 131072, size 14909440
    [  112.808112]  nand: nand1 nand2

    It's clear that my CubieTruck fails to boot from nand.  I have searched around the web and conclusion is that i should install old ubuntu-server and flash with LiveSuite (which is not working with my MacOSsierra...)

    Is there any other possibilities to get system booting from /den/nand?

     

    Br

    miha

×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines