Jump to content

onsmike

Members
  • Posts

    5
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. hi, I just want to share my experience with running armbian with Tanix TX9S. I recently bought it from gearbest because it was the lowest-prices S912 device with 1Gbps ethernet. I intent to use it with armbian/Home Assistant. Note that TX9S does NOT have a BT. I also tried with meson-gxm-q200.dtb with both the desktop/cli version of debian buster. The ethernet works, but no wifi was detected. I then tried meson-gxm-q201.dtb. While it boots, either ethernet nor wifi was detected. While I intent to use my TX9S as a headless server, I nonetheless wonder if one can get wifi to work with armbian? I am willing to help in any way I can. regards,
  2. just a quick update. I've been using the same Microsoft/Nokia phone charger but changed the SD card to an 8gig ADATA class-10 microsd card and the system has been stable for the past 7-days. In the meantime, the usb PSU I ordered from Microsoft (the original 2.5A psu for RPI3) has arrived, which I'll be testing next.
  3. understood. I just ordered the official 2.5A usb PSU for RPI3 from Microsoft Store. Will report back once I receive it.
  4. Thanks to both of you who responded. My problem is that I cannot reach the armbien/orange pi zero via both ssh nor the webinterface (pi hole). I am using wired ethernet with DHCP, though it is static-DHCP so it always get the same private address. Given I have no video-output option, I have no way to confirm if it is indeed down or a DHCP lease issue. I am using a cell-phone charger (Microsoft/Nokia) as the PSU; the usb cable is part of the charger (i.e. not a separate cable). For the time-being, I am debugging by replacing the SD card but keeping the usb charger. The SD card I am using right now is a 8gb ADATA class-10 microsd. will report back in a few days,
  5. Greetings, I recently purchased an Orange Pi Zero for the purpose of Pi-Hole. I have been running Pi-Hole on a Raspberry Pi-1 under Jessie and the stability was great. I never had to worry about it. However, with Orange Pi Zero, running Armbian/Jessie as well, I get a maximum of 2 days of up-time. This is a standard armbian/jessie installation with only pi-hole installed. Since there is no video output (I did not purchase the extension board), I had to perform a power-off/on. Without ruling out the possibility of hardware fault (SD card or USB power supply), does anyone have stability problem of Armbian/Jessie on Orange Pi Zero? I'll attempt to use a different (newer) SD card and USB Power. Any thoughts on what might cause the problem is very appreciated,
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines