plasta-blaster

I had a load of crap in the iptables which I have cleared out. and installed iptables-persistent which worked. I installed arno and ran it again but it failed on the reconfigure, it turns out arno adds a load of stuff and I cant be bothered to work it out so I guess its back to iptables persistent!

4.4.66-rockchip

Hey I just noticed that ufw is no longer running/enabled as above error. Is this likely to be fixed anytime soon? In the mean time Is there a firewall you guys are using that works? I tried arno but could not get it run properly. I guess Ill have to edit iptables manually:-(

I just wanted to say that I had accidentally left my Tinker on a stress test for about 4 days in the searing summer heat! I do have an over large heatsink but when I had realised it was on a stress test I looked at the temp_watch and is was down in the 50s. BUT the thing I want to point out :- Yes I am a idiot for forgetting about it, but I have so many boxes running stuff I have a excuse:-) In many ways this accidental test has made me very happy about this board as I have several different setups on different machines including offsite servers running the same jobs as this, but over the last 2 weeks these machines have had more issues than the Tinker. It have a load of cron jobs which basically run a multi-core docker job which I have been monitoring and I have to say even thou it was running a stress test full on for so long 'it never missed a beat on the docker multi-core jobs' I was asking it to do every few hours and I received more errors from the other under stressed systems Including droplets! Thanks Armbian, Rockchip and Asus!

seconde attemptde random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 2890 2853 10059 10153 8828 3774 102400 1024 49388 43091 54599 54656 54541 47202

no i think this good, I love this so much more than the PI. I have a 5V 3A thick PSu nd no problems running Armbian, thanks so much! I have question if I have a laptop with same processor can run armbian instead of that shit ArchArm? random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 2664 2869 10518 10463 10140 4648 102400 1024 23697 23682 56172 56190 56103 31487 Never went over 33 Degress at 600Mhz I have a 5V supply with xbox heat sink on it, no fan :

:-)

:-)

Wow I removed the sticky tape from the Asus supplied heat-sink and put down some Notchua thermal paste - no difference to using the tape I guess that means it throttling at 73-74 Degress C. Also I have the type -C processor can you add the 1.8Ghz to the tree please. thanks

Yer I saw that and Linus with his desktop aquarium build. I hammer the hell out of my machines, I had bought a Pi 3 for WOL for my servers but then wanted it to do more, unfortunately it could not keep up. I have this Rockchip in a little Asus Chromebook running Arch which I love for working in the garden etc so jumped on the Tinkerboard. But my Chromebook has a alu case as a heat-sink.

Yes I have a bid on a X-Box 360 which has a huge heat sink which I will utilise as a heat sink:- heatsink And Noctua are very quite I have them in my Desktop and servers, super 6 year guarantee, also lowest Db of any fan I could find, just need to turn 5v into 12v:-)

I ordered one of these : noiseless fan Just have to figure out how to control and mount it!

I think the max cpu clock is wrong unless we have the no -C version ie not 1.8 Ghz cpu clock. I have order a replacement to see if it is the type-C if not I will be ordering the HiKey960:-) (if it ever comes out with a Linux build)

It was maxing out at 73 degrees C on the temp. Can you help me get it running at max 1.8Ghz, I believe it related to the driver of the proc? I tried changing all sorts of files but it wont budge from 1.6GHZ although I read that there are 2 types of procs and only the C version is 1.8GHZ ouch! OUCH! This test is with the Heat-sink on, I dont have any thermal tape to put it back but I will order some! stress -c 4 -t 60 ; sysbench --test=cpu --cpu-max-prime=20000 run --num-threads=4 ; 7z b ; timeout 120 minerd --benchmark stress: info: [2765] dispatching hogs: 4 cpu, 0 io, 0 vm, 0 hdd stress: info: [2765] successful run completed in 60s sysbench 0.4.12: multi-threaded system evaluation benchmark Running the test with following options: Number of threads: 4 Doing CPU performance benchmark Threads started! Done. Maximum prime number checked in CPU test: 20000 Test execution summary: total time: 74.7377s total number of events: 10000 total time taken by event execution: 298.9201 per-request statistics: min: 28.41ms avg: 29.89ms max: 87.31ms approx. 95 percentile: 32.35ms Threads fairness: events (avg/stddev): 2500.0000/3.08 execution time (avg/stddev): 74.7300/0.01 7-Zip 9.20 Copyright (c) 1999-2010 Igor Pavlov 2010-11-18 p7zip Version 9.20 (locale=en_US.UTF-8,Utf16=on,HugeFiles=on,4 CPUs) RAM size: 2011 MB, # CPU hardware threads: 4 RAM usage: 850 MB, # Benchmark threads: 4 Dict Compressing | Decompressing Speed Usage R/U Rating | Speed Usage R/U Rating KB/s % MIPS MIPS | KB/s % MIPS MIPS 22: 2947 331 865 2866 | 70139 397 1592 6328 23: 2891 334 881 2946 | 65551 399 1502 5998 24: 2755 341 868 2963 | 58094 399 1350 5389 25: 2754 346 908 3144 | 64661 392 1551 6080 ---------------------------------------------------------------- Avr: 338 880 2980 397 1499 5949 Tot: 368 1190 4464 [2017-05-05 17:03:32] 4 miner threads started, using 'scrypt' algorithm. [2017-05-05 17:03:32] Binding thread 0 to cpu 0 [2017-05-05 17:03:32] Binding thread 2 to cpu 2 [2017-05-05 17:03:32] Binding thread 3 to cpu 3 [2017-05-05 17:03:32] Binding thread 1 to cpu 1 [2017-05-05 17:03:35] thread 2: 4098 hashes, 1.44 khash/s [2017-05-05 17:03:35] thread 3: 4098 hashes, 1.44 khash/s [2017-05-05 17:03:35] thread 0: 4098 hashes, 1.42 khash/s [2017-05-05 17:03:35] thread 1: 4098 hashes, 1.41 khash/s [2017-05-05 17:03:37] thread 3: 2880 hashes, 1.34 khash/s [2017-05-05 17:03:37] Total: 5.61 khash/s [2017-05-05 17:03:37] thread 0: 2844 hashes, 1.32 khash/s [2017-05-05 17:03:37] thread 1: 2814 hashes, 1.32 khash/s [2017-05-05 17:03:37] thread 2: 2880 hashes, 1.27 khash/s [2017-05-05 17:03:43] thread 2: 6342 hashes, 1.15 khash/s [2017-05-05 17:03:43] thread 3: 6720 hashes, 1.17 khash/s [2017-05-05 17:03:43] Total: 4.96 khash/s [2017-05-05 17:03:43] thread 0: 6612 hashes, 1.15 khash/s [2017-05-05 17:03:43] thread 1: 6609 hashes, 1.15 khash/s [2017-05-05 17:03:48] thread 2: 5757 hashes, 0.99 khash/s [2017-05-05 17:03:48] thread 0: 5769 hashes, 1.01 khash/s [2017-05-05 17:03:48] thread 1: 5736 hashes, 1.00 khash/s [2017-05-05 17:03:49] thread 3: 5838 hashes, 0.98 khash/s [2017-05-05 17:03:49] Total: 3.97 khash/s [2017-05-05 17:03:52] thread 3: 3906 hashes, 1.11 khash/s [2017-05-05 17:03:52] Total: 4.10 khash/s [2017-05-05 17:03:53] thread 0: 5034 hashes, 1.13 khash/s [2017-05-05 17:03:53] thread 2: 4938 hashes, 1.09 khash/s [2017-05-05 17:03:53] thread 1: 4986 hashes, 1.12 khash/s [2017-05-05 17:03:53] thread 3: 1113 hashes, 1.09 khash/s [2017-05-05 17:03:53] Total: 4.44 khash/s [2017-05-05 17:03:58] thread 2: 5451 hashes, 1.02 khash/s [2017-05-05 17:03:58] thread 0: 5673 hashes, 1.03 khash/s [2017-05-05 17:03:58] thread 3: 5472 hashes, 1.04 khash/s [2017-05-05 17:03:58] Total: 4.21 khash/s [2017-05-05 17:03:59] thread 1: 5589 hashes, 1.00 khash/s [2017-05-05 17:04:02] thread 1: 4005 hashes, 1.08 khash/s [2017-05-05 17:04:03] thread 2: 5124 hashes, 1.11 khash/s [2017-05-05 17:04:03] thread 0: 5145 hashes, 1.12 khash/s [2017-05-05 17:04:03] thread 3: 5181 hashes, 1.12 khash/s [2017-05-05 17:04:03] Total: 4.43 khash/s [2017-05-05 17:04:03] thread 1: 1080 hashes, 1.08 khash/s [2017-05-05 17:04:08] thread 2: 5565 hashes, 1.13 khash/s [2017-05-05 17:04:08] thread 0: 5607 hashes, 1.13 khash/s [2017-05-05 17:04:08] thread 3: 5577 hashes, 1.12 khash/s [2017-05-05 17:04:08] Total: 4.46 khash/s [2017-05-05 17:04:08] thread 1: 5394 hashes, 1.10 khash/s [2017-05-05 17:04:13] thread 2: 5649 hashes, 1.11 khash/s [2017-05-05 17:04:13] thread 0: 5652 hashes, 1.14 khash/s [2017-05-05 17:04:13] thread 1: 5502 hashes, 1.14 khash/s [2017-05-05 17:04:13] thread 3: 5616 hashes, 1.15 khash/s [2017-05-05 17:04:13] Total: 4.54 khash/s [2017-05-05 17:04:18] thread 2: 5535 hashes, 1.11 khash/s [2017-05-05 17:04:18] thread 0: 5694 hashes, 1.14 khash/s [2017-05-05 17:04:18] thread 1: 5712 hashes, 1.12 khash/s [2017-05-05 17:04:18] thread 3: 5748 hashes, 1.13 khash/s [2017-05-05 17:04:18] Total: 4.50 khash/s [2017-05-05 17:04:23] thread 2: 5544 hashes, 1.07 khash/s [2017-05-05 17:04:23] thread 0: 5682 hashes, 1.09 khash/s [2017-05-05 17:04:23] thread 1: 5622 hashes, 1.10 khash/s [2017-05-05 17:04:23] thread 3: 5637 hashes, 1.10 khash/s [2017-05-05 17:04:23] Total: 4.37 khash/s [2017-05-05 17:04:28] thread 2: 5376 hashes, 1.08 khash/s [2017-05-05 17:04:28] thread 0: 5469 hashes, 1.09 khash/s [2017-05-05 17:04:28] thread 1: 5508 hashes, 1.10 khash/s [2017-05-05 17:04:28] thread 3: 5523 hashes, 1.11 khash/s [2017-05-05 17:04:28] Total: 4.38 khash/s [2017-05-05 17:04:33] thread 0: 5469 hashes, 1.13 khash/s [2017-05-05 17:04:33] thread 2: 5382 hashes, 1.09 khash/s [2017-05-05 17:04:33] thread 1: 5520 hashes, 1.13 khash/s [2017-05-05 17:04:33] thread 3: 5550 hashes, 1.13 khash/s [2017-05-05 17:04:33] Total: 4.47 khash/s [2017-05-05 17:04:38] thread 2: 5454 hashes, 1.13 khash/s [2017-05-05 17:04:38] thread 1: 5631 hashes, 1.14 khash/s [2017-05-05 17:04:38] thread 3: 5649 hashes, 1.15 khash/s [2017-05-05 17:04:38] Total: 4.54 khash/s [2017-05-05 17:04:38] thread 0: 5640 hashes, 1.11 khash/s [2017-05-05 17:04:42] thread 2: 5637 hashes, 1.34 khash/s [2017-05-05 17:04:42] thread 1: 5709 hashes, 1.33 khash/s [2017-05-05 17:04:42] thread 3: 5730 hashes, 1.33 khash/s [2017-05-05 17:04:42] Total: 5.11 khash/s [2017-05-05 17:04:42] thread 0: 5568 hashes, 1.28 khash/s [2017-05-05 17:04:43] thread 2: 1341 hashes, 1.26 khash/s [2017-05-05 17:04:43] thread 1: 1332 hashes, 1.27 khash/s [2017-05-05 17:04:43] thread 3: 1332 hashes, 1.29 khash/s [2017-05-05 17:04:43] Total: 5.11 khash/s [2017-05-05 17:04:43] thread 0: 1284 hashes, 1.26 khash/s [2017-05-05 17:04:48] thread 2: 6300 hashes, 1.26 khash/s [2017-05-05 17:04:48] thread 1: 6351 hashes, 1.25 khash/s [2017-05-05 17:04:49] thread 0: 6309 hashes, 1.22 khash/s [2017-05-05 17:04:49] thread 3: 6471 hashes, 1.24 khash/s [2017-05-05 17:04:49] Total: 4.97 khash/s [2017-05-05 17:04:53] thread 0: 4902 hashes, 1.11 khash/s [2017-05-05 17:04:53] thread 3: 4971 hashes, 1.13 khash/s [2017-05-05 17:04:53] Total: 4.74 khash/s [2017-05-05 17:04:54] thread 2: 6291 hashes, 1.12 khash/s [2017-05-05 17:04:54] thread 1: 6231 hashes, 1.13 khash/s [2017-05-05 17:04:58] thread 2: 4479 hashes, 1.07 khash/s [2017-05-05 17:04:58] thread 3: 5643 hashes, 1.10 khash/s [2017-05-05 17:04:58] Total: 4.41 khash/s [2017-05-05 17:04:58] thread 0: 5541 hashes, 1.07 khash/s [2017-05-05 17:04:58] thread 1: 4521 hashes, 1.03 khash/s [2017-05-05 17:05:03] thread 2: 5355 hashes, 1.08 khash/s [2017-05-05 17:05:03] thread 1: 5175 hashes, 1.09 khash/s [2017-05-05 17:05:03] thread 0: 5331 hashes, 1.06 khash/s [2017-05-05 17:05:03] thread 3: 5508 hashes, 1.08 khash/s [2017-05-05 17:05:03] Total: 4.31 khash/s [2017-05-05 17:05:08] thread 2: 5406 hashes, 1.10 khash/s [2017-05-05 17:05:08] thread 3: 5397 hashes, 1.10 khash/s [2017-05-05 17:05:08] Total: 4.35 khash/s [2017-05-05 17:05:08] thread 1: 5433 hashes, 1.08 khash/s [2017-05-05 17:05:08] thread 0: 5307 hashes, 1.08 khash/s [2017-05-05 17:05:13] thread 2: 5478 hashes, 1.14 khash/s [2017-05-05 17:05:13] thread 0: 5379 hashes, 1.14 khash/s [2017-05-05 17:05:13] thread 3: 5517 hashes, 1.14 khash/s [2017-05-05 17:05:13] Total: 4.51 khash/s [2017-05-05 17:05:13] thread 1: 5421 hashes, 1.11 khash/s [2017-05-05 17:05:18] thread 2: 5721 hashes, 1.11 khash/s [2017-05-05 17:05:18] thread 0: 5715 hashes, 1.12 khash/s [2017-05-05 17:05:18] thread 1: 5553 hashes, 1.11 khash/s [2017-05-05 17:05:18] thread 3: 5685 hashes, 1.11 khash/s [2017-05-05 17:05:18] Total: 4.45 khash/s [2017-05-05 17:05:23] thread 2: 5535 hashes, 1.09 khash/s [2017-05-05 17:05:23] thread 1: 5547 hashes, 1.12 khash/s [2017-05-05 17:05:23] thread 0: 5622 hashes, 1.11 khash/s [2017-05-05 17:05:23] thread 3: 5571 hashes, 1.09 khash/s [2017-05-05 17:05:23] Total: 4.41 khash/s [2017-05-05 17:05:28] thread 2: 5454 hashes, 1.12 khash/s [2017-05-05 17:05:28] thread 1: 5589 hashes, 1.10 khash/s [2017-05-05 17:05:28] thread 0: 5547 hashes, 1.10 khash/s [2017-05-05 17:05:28] thread 3: 5469 hashes, 1.11 khash/s [2017-05-05 17:05:28] Total: 4.43 khash/s

I tried running but the monitor does not pick up the temp reading is there somewhere I can set it to read /sys/class/thermal/thermal_zone1/temp

Thanks I will have a look at the Banana Pi M2+ The heatsink is a stick-on type, but I can keep the heatsink on and use the fan as well, just bought a header extender to clear the tall heat sink, I guess I just need to install the python gpio module and maybe change the code a bit. This kit says it has a heat sink but the Asus one is good just tall hense the header extender and I will have to raise the pillar mounts somehow. kit I have a question about the clock speed, the chip is said to be 1.8GHz but mine is limited to 1.6. $ more /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq 1608000 $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies 126000 216000 408000 600000 696000 816000 1008000 1200000 1416000 1512000 1608000 Do I have to change some file to get the stated max clock speed and obviously increased temps:-) $ cpufreq-info cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: cpufreq-dt CPUs which run at the same hardware frequency: 0 1 2 3 CPUs which need to have their frequency coordinated by software: 0 1 2 3 maximum transition latency: 115 us. hardware limits: 126 MHz - 1.61 GHz available frequency steps: 126 MHz, 216 MHz, 408 MHz, 600 MHz, 696 MHz, 816 MHz, 1.01 GHz, 1.20 GHz, 1.42 GHz, 1.51 GHz, 1.61 GHz available cpufreq governors: interactive, conservative, ondemand, userspace, powersave, performance, sched current policy: frequency should be within 600 MHz and 1.61 GHz. The governor "performance" may decide which speed to use within this range. current CPU frequency is 1.61 GHz. cpufreq stats: 126 MHz:4.39%, 216 MHz:0.00%, 408 MHz:0.00%, 600 MHz:0.00%, 696 MHz:0.00%, 816 MHz:0.00%, 1.01 GHz:0.00%, 1.20 GHz:0.00%, 1.42 GHz:0.00%, 1.51 GHz:0.00%, 1.61 GHz:95.61% (3) Thanks!

Welcome to ARMBIAN 5.27 stable Ubuntu 16.04.2 LTS 4.4.64-rockchip The heat is coming from the processor, when I was installing and compiling packages on it the first night it was running 70 degress and when I run a stress test on all cores for 10 mins, I am getting 70 degrees, which may not be bad after watching these videos, where he getting 79 degrees Or this one where she is getting low temps I need a case and this kit looks good if it will work but I am unsure as not done anything ever with GPIO pins etc. case kit

Hey My Tinker board is my first dev board and it runs damn hot, I saw this and it says its for the PI, can somebody in the know tell me if It would work on the Tinker Board please. I am running Armbian Ubuntu server temp fan control Thanks!

Ran the command in the first post on 2 cards on the Tinker Board running Ubuntu server. The Pro does seem faster in real life but appears to be throttled according to these results. SanDisk EXTREME PRO 32G microsd 102400 4 2940 2979 12358 12454 11854 5106 102400 16 9973 10193 27494 27136 26774 14460 102400 512 50169 45212 54768 54786 54759 43162 102400 1024 51667 50141 55535 55509 55527 51758 102400 16384 56494 57656 62516 62519 62515 54816 SanDisk EXTREME 32G microsd 102400 4 3295 3386 12895 12944 11334 5094 102400 16 10249 10594 28429 28444 28299 12279 102400 512 46567 46915 54335 54433 54405 38604 102400 1024 52560 52806 55081 55182 55168 46654 102400 16384 54682 55071 62509 62525 62522 55492