Hello,
I am new here, writing this post from my orange pi prime.
sorry for my terrible English.
The wire eth0 work, but the wifi not, the armbian not see the wifi hardware.
using the orange pi prime img from site, ubuntu or debian (the img that just work in 1280x720) the wifi work, and work fine, the best reception that i see in my live. for idea, my raspberry pi 3 get 53% of signal in wavemon, and the orange pi prime 85% in the same place!!! but with armbian just the wire network is working here. the wifi the system note see the wlan0.
ice@orangepiprime:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 02:01:7c:9b:c9:7c
inet addr:192.168.xxx.xxx Bcast:192.168.xxx.xxx Mask:255.255.255.0
inet6 addr: fe80::e9d4:5387:4761:295b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:69931 errors:0 dropped:0 overruns:0 frame:0
TX packets:46501 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:65169073 (65.1 MB) TX bytes:6066878 (6.0 MB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:33 errors:0 dropped:0 overruns:0 frame:0
TX packets:33 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2325 (2.3 KB) TX bytes:2325 (2.3 KB)
ice@orangepiprime:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
ice@orangepiprime:~$ lsusb
Bus 008 Device 002: ID 413c:2107 Dell Computer Corp.
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 004: ID 13fe:1d00 Kingston Technology Company Inc. DataTraveler 2.0 1GB/4GB Flash Drive / Patriot Xporter 4GB Flash Drive
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
ice@orangepiprime:~$
ice@orangepiprime:~$ lspci
pcilib: Cannot open /proc/bus/pci
lspci: Cannot find any working access method.
ice@orangepiprime:~$
ice@orangepiprime:~$ lshw
WARNING: you should run this program as super-user.
orangepiprime
description: AArch64 Processor rev 4 (aarch64)
product: Xunlong Orange Pi Prime
serial: 828000017c9bc97c
width: 64 bits
*-core
description: Motherboard
physical id: 0
capabilities: xunlong_orangepi-prime allwinner_sun50i-h5
*-cpu:0
description: CPU
product: cpu
physical id: 0
bus info: cpu@0
capabilities: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
*-cpu:1
description: CPU
product: cpu
physical id: 1
bus info: cpu@1
capabilities: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
*-cpu:2
description: CPU
product: cpu
physical id: 2
bus info: cpu@2
capabilities: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
*-cpu:3
description: CPU
product: cpu
physical id: 3
bus info: cpu@3
capabilities: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
*-memory
description: System memory
physical id: 4
size: 1995MiB
*-network
description: Ethernet interface
physical id: 1
logical name: eth0
serial: 02:01:7c:9b:c9:7c
size: 1Gbit/s
capacity: 1Gbit/s
capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sun8i_emac driverversion=00 duplex=full ip=192.168.xxx.xxx link=yes multicast=yes port=MII speed=1Gbit/s
WARNING: output may be incomplete or inaccurate, you should run this program as super-user.
ice@orangepiprime:~$
I hope this relate help you in this project.
Best regards,