martinayotte

Members
  • Content Count

    3748
  • Joined

  • Last visited

 Content Type 

Forums

Member Map

Store

Crowdfunding

Raffles

Applications

Calendar

Everything posted by martinayotte

  1. What I found few months ago is that when using "old-school" /etc/network/interfaces, you need to do "systemctl disabled NetworkManager", otherwise latest is conflicting and try to steal interface.
  2. No, unfortunately, I have no needs for AP mode. I don't even know if the current driver is supporting it ...
  3. Edit /boot/boot.cmd instead to remove the "console=ttyS0,115200" part, and recompile the /boot/boot.scr using "mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr". Make sure /boot/armbianEnv.txt has "console=display" ...
  4. I doubt he did since OPiZero doesn't have any barrel connector ...
  5. The best option to have an IR Transmitter would be to use something like a BluePill STM32F103 board connected to the NanoPi, and having both IR RX and TX managed by this board, with proper firmware to also been able to "learn" IR codes that need to be emulated...
  6. You can try the "old school" way by adding the following in /etc/network/interfaces : # Wired adapter #1 allow-hotplug eth0 iface eth0 inet dhcp
  7. 2h00 PM GMT make it 10h00AM EDT for me, will be drinking my second coffee cup ...
  8. In my case, a fresh 5.7.6 build on my OPi2E, the WiFi is working, although I'm using "old school" /etc/network/interfaces with NetworkManager disabled ...
  9. You mean RTL8723BS ... Armbian has some patches for this drivers, but they are actually for some AllWinner boards, not for Rockchip. It is possible to port them, but maybe it is an hard job ...
  10. If there is no square metal module, then it should have at least a chip, because RK3328 doesn't have WiFi built-in ...
  11. Ah ! But this is only an antenna... What is the WiFi module part of the SBC, usually a small metal square module, what is the part number written on it ?
  12. Never heard about about this brand ... Maybe there is no Linux kernel driver for it ? Is it a USB dongle ? What "lsusb" is showing ?
  13. Do you know which WiFi module it is using ? Did you look at what "dmesg" is reporting ?
  14. Did you added the "EXPORT_SYMBOL(of_chosen);" to driver/of/base.c ?
  15. I think I've found the problem : Those "of_chosen" symbol dependencies came in the @megi commit https://github.com/megous/linux/commit/4ea85aef763727ab40791ae3c0c8dd1bb87ef577 But the "of_chosen" symbol export is not provided in driver/of/base.c like suggested by a guy 4 years ago : https://lore.kernel.org/patchwork/patch/710174/ I'm now compiling new 5.7.y build and will let you know if it is succeeded ...
  16. Maybe ... Can you try stopping U-Boot in early stage by pressing several times <spacebar> to get into the U-Boot prompt ? If Yes, then do "mmc list" to figure out if SD is present, then "setenv devnum 0" (if 0 is the SD) followed by "run mmc_boot", it should then boot from the SD ...
  17. I've the same issue trying to build 5.7.y branch ...
  18. Are you still been able to boot from SD ? In such case, you should be able to redo the process from scratch ... If not, you will need to find a way to disable eMMC, usually using a jumper or a test point.
  19. Did you tried building from sources ? https://github.com/mongodb/mongo/blob/master/docs/building.md
  20. From my Bell Fiber TV Decoder, but I'm using HDMI splitter ... Yes ! Actually, I'm using currently a HDMI Capture box purchased a year ago (at US$80), which store the capture on USB dongle, which I then copy files into a NAS, but current limitation is that files are splitted into 2GB FAT chunk (around 20mins of recording) instead of single files. I then need to concatenate them into single one using ffmpeg. Then, I convert them into DVD with "dvdauthor" to give DVDs to my mother ...
  21. For me, it is simply for TV shows archives ...
  22. Fortunately, I've ordered one last week, but still waiting for the shipment ...
  23. How did you do the transfer ? Did you used "nand-sata-install" ?