bshiznit

Image update Mate\XFCE+KODI 20170628. Updated libs. Now has less to hang.

Module "dhd" the same behavior ?
Have you tried to configure and connect, wait 5 minutes after enabling the module ?
 
 
To ALL
Error found in latest version of Armbian+KODI (20170623) and images that can be repaired without downloading a new image (in which these errors are corrected).
1. Freeze sound. To resolve is to edit the file /etc/pulse/default.pa the line load-module module-udev-detect (remove the tsched=0).
2. In a lengthy video playback in the main system turns on the screensaver and artefacts to video. The solution is to disable or uninstall the screensaver. Or use a separate graphics desktop and launch KODI. To do this, remove the package "nodm", install package "lightdm". This will allow at the entrance of the system to choose which system to run Mate\XFC or KODI. In the upper right corner of the login screen (lightdm) there is a button to select Mate or KODI. To run KODI you need to choose the second option in the menu.

Add image Debian XFCE+KODI
Works for me VIM Pro.
Armbian_5.27_S9xxx_Debian_jessie_3.14.29_xfce_KODI_20170623.img.xz

Try the latest image with KODI. It needs to work properly. Don't forget to use the correct dtb from VIM (copy "kvim.dtb" the "dtb.img" to root FAT).

Beta version (20170623). Image c KODI. This way works as usual with the primary setting. Volume expansion occurs automatically. Pay attention now to run KODI you need to use the tab menu (graphics\sound). Works addons\setings. To configure the WiFi - need to use the setting in the main system. KODI works with hardware and settings, which are executed in the primary system. For WiFi you need to register the correct module in the startup file (/etc/modules).
 
Armbian_5.27_S9xxx_Ubuntu_xenial_3.14.29_mate_KODI_20170623.img.xz

Figured with the launch KODI from the average user. For this you need to add it to the group. To run the command
 
"sudo usermod -a-G audio,video,disk,input,tty user"
 
And edit the file /boot/hdmi.sh replace 1 to 0 . The line after editing should be
 
"echo 0 > /sys/devices/virtual/graphics/fbcon/cursor_blink"
 
After these steps, you can launch KODI from the menu.

A test image of Ubuntu Mate KODI. It's a predefined way. The user "user" password to "1". The user "root" password "root". Launch KODI should run as root user (open a console and execute "su -" enter passwd root "kodi"). This version of KODI normally plays full-screen video. After leaving their KODI the screen remains black, you need to switch to another console (Ctrl+Alt+F1) and switch back (Ctrl+Alt+F7).
 
S9xx_Ubuntu_KODI_20170621_3_14_29.img.xz

Thanks! Just getting my bearings - compiled u-boot and 3.14.29 kernel using the khadas github's Ubuntu branches a few days ago - so luckily I had created a bootable SD already using dd. I have been running Armbian_5.27_S9xxx_Ubuntu_xenial_3.14.29_mate_20170619 from SD so I already enabled multiboot as well. WOW this things runs great...
Will play with this image today.
Oh also to get the firmware for Khadas VIM Wifi working I edited a couple files per these patches I found:
https://github.com/khadas/LibreELEC.tv/blob/Vim-devel/packages/linux-firmware/wlan-firmware/patches/wlan-firmware-03-AP6212A-AP6255-firmware-auto-select.patch
https://github.com/khadas/LibreELEC.tv/blob/Vim-devel/packages/linux-firmware/wlan-firmware/patches/wlan-firmware-04-AP6212-firmware-auto-select.patch
 
I have the Pro (2GB/16GB EMMC) which uses AP6255 - but brought in support for AP6212 too. After this running
sudo modprobe dhd Got the wifi up and running

A test image with ArchLinux+KODI. Pay attention, this is only early alpha and many things not working and you need to run manually. To run this you need an image that would have been activated multiboot (yet in this way there is no file to activate multi-boot) use.
1. Decompress and write to the media (note that the original image has a size of 2 GB, and after the free not space. To expand the second partition ext4 manually on all media)
2. If necessary, add correct dtb file with the name "dtb.img"
3. After system startup, log in as the root user and the root password. To start KODI, type the command "kodi". The system allows you to establish regular means (pacman) any packets. Setting , as usual in ArchLinux.
 
https://yadi.sk/d/BbH_N6HFzvjhm
S9xx_ArchLinux_KODI_20170620_3_14_29.img.xz
 
Also on the website there are modified packages to install (kodi-aml  and libgl-aml). A minimal set of packages for this version of the KODI - xorg-server, xf86-video-fbturbo-odroid-c2-git kodi-aml, libgl-aml.
 
To set permissions you need to edit the file /boot/hdmi.sh (as usual in the images Armbian).