ripperhack

SOLVED, thx a lot My mistake name package

Thanks for the test, I can not understand why it does not work. Can you tell me which configurable file I can force the autononeg OFF and 1000mb? Searching the Internet might be a compatibility issue with the router and the network driver and it is advisable to set the speed by config file but I do not know which file to edit thx a lot

I've already tried with the NAS and it works at 1000

I have also installed transmission-cli but the result is always the same, no command found when typing transmission-remote

Hi to all, another little question whit Armbian 5.31 Stable on Orangepi+2E. I installed a transmission-daemon that works perfectly but when typing the transmission-remote command for scripting torrent management from terminal the system responds command not found. I thought the command was included in the transmission-daemon installation (according from man transmission-daemon), something wrong? thx a lot and sorry for my bad english

Wonderfoul tool http://sprunge.us/KGNH

The strange thing is that the router detects 1000mb during the orangi boot. When the boot is complete (ssh ready) it detects 100mb. I consider it an armbian configuration problem. It is probably the auto negotiation on in network setting?

By default it does not work in gigabit, I can force it to 1000Mb ? If I connect to the same cable the NAS it works in gigabit, the router is configured correctly

Hi to all, my eth0 is configured to work 100Mb/s by default Linux orangepiplus2e 3.4.113-sun8i #18 SMP PREEMPT Thu Jun 15 02:16:06 CEST 2017 armv7l GNU/Linux ethtool eth0 | grep Speed Speed: 100Mb/s but support gigabit connection: ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 0 Transceiver: external Auto-negotiation: on Link detected: yes Can I setting via terminal eth0 to work permanently in gigabit mode? (router port is setting in gigabit) thx a lot