Jump to content

finally

  • Posts

    9
  • Joined

  • Last visited

 Content Type 

Forums

Member Map

Store

Crowdfunding

Applications

Everything posted by finally

  1. If it's not about the native sata you should really think about a dirt cheap H3 board (maybe a orange pi one for 10$, about 33R$) and a also cheap but uas capable and supported usb3-sata-bridge (maybe another 5$, about 16R$). If you want to do your self a little favor you could also thinking of upgrading the H3 to a H5, for example with a Orange Pi PC 2 (about 18$ or 58R$) which comes with one very nice advantage: gigabit Ethernet. So also if the budget is small it can work out
  2. Good to know. I just wanted to upgrade my beelink x2 to the latest version - but when it's like this I'd rather wait a little
  3. Just an update. I did it - finally. And it works! First. This one here didn't work (afterwards with: power off - remove cable - wait - attach cable - power on) Update Firmware file name: JMS578_Hardkernel_v173.01.00.01.bin Open Backup File Error!! Second round did it (also afterwards with: power off - remove cable - wait - attach cable - power on) Update Firmware file name: JMS578_Hardkernel_v173.01.00.01.bin Backup Firmware file name: backup.bin Backup the ROM code sucessfully. Programming & Compare Success!! And here we go. fresh version: Bridge Firmware Version: v173.1.0.1 And the best: /dev/sda: drive state is: active/idle Just one thing has changed: (now data from the bridge is taken) compared to before (where the data from disk was retrieved)
  4. I posted already over here: but here should be the right place... My Firmware is 0.2.0.4 (so it's a bus-powered SATA HDD/SSD device) and looks like this: USB3-HD-Case Right now (FW: 0.2.0.4) I have the following outputs: Information in OMV (armbian build) is given and correct. SMART-DATA is also available inside of OMV without any tweaking. UAS looks active for me: /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M |__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=uas, 480M Just the power management seems to be off track /dev/sda: SG_IO: bad/missing sense data, sb[]: 70 00 01 00 00 00 00 0a 00 00 00 00 00 1d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 drive state is: unknown Anything else I can test before doing the firmware upgrade?
  5. Hello, i just downloaded the pack (tool & firmware) to try on a orangepipc2 which has a attached a usb hard disk. I'm a little confused right now. My usb device is (from lsusb): ID 152d:0578 JMicron Technology Corp. / JMicron USA Technology Corp. but if I give a look @ https://www.smartmontools.org/wiki/Supported_USB-Devices I see the following: Anyway if I run: ./JMS578FwUpdate -d /dev/sda -v I didn't want to try the firmware upgrade because I'm not sure if this is the right model for the firmware Somebody can (de)confirm?
  6. For a long term solution and also maybe made as a kind of 'supporter'-membership with some special sweets ('exlusive' beta images for example) I can think something like patreon could do the thing -> https://www.patreon.com/
  7. finally

    finally

  8. After reading a thousand topics - here is my mustard (not moustache)! ArmBeyond - experimental ArmBeyond - testing ArmBian - stable ArmBian - mainline Beyond your experience? Forget it!
×
×
  • Create New...