• Content Count

  • Joined

  • Last visited

  1. Hello everyone, I am a beginner in Linux. I have a Hummingboard i2ex and I am running Armbian_5.30_Cubox-i_Ubuntu_xenial_4.11.4_desktop on it. Trying to use a CSI Tool, I have to compile and install this kernel : https://github.com/xieyaxiongfly/Atheros-CSI-Tool.git Here are the steps that I did on the Hummingboard: ( you can see the tutorial: http://pdcc.ntu.edu.sg/wands/Atheros/document/Atheros-CSI-Tool-User-Guide.pdf ) 1) sudo apt-get install git (to clone the source) 2) sudo apt-get install libncurses5-dev libncursesw5-dev (to run makemenuconfig) 3) git clone https://github.com/xieyaxiongfly/Atheros-CSI-Tool.git 4) Enter the dir ~/Atheros-CSI-Tool/ 5) make menuconfig (use the default config provided by the kernel) 6) make 7) make modules 8) sudo make modules_install 9) sudo make install The compilation works fine and the make install command creates the following files in the /boot directory. ◾vmlinuz-4.1.10-fslc-imx6-sr+ ◾System.map-4.1.10-fslc-imx6-sr ◾initrd.img-4.1.10-fslc-imx6-sr ◾config--4.1.10-fslc-imx6-sr Then I copy the zImage Atheros-CSI-Tool/arch/arm/boot/zImage to the boot partition /boot. But when I reboot the hummingboard, I get no HDMI output and in the serial console I get the initialization and then Starting kernel ... Do you have any idea if the process is alright and how can I run this kernel on my Hummingboard. Thanks in advance, Fares