Jump to content

verb

Members
  • Posts

    16
  • Joined

  • Last visited

  1. I saw that but i dont understand why it fails to mount /dev/data and i go through the same steps with armbian 5.37 and it works fine.
  2. I have problems after instaling 5.41 20180330. ubuntu server image here is the log from uart : https://pastebin.com/raw/qLb4Kd9M and here some pics from console : https://pasteboard.co/HeBhPXa.jpg -> https://pasteboard.co/HeBjEwq.jpg Sorry for bad pic quality . Also i do the install via uart with these commands : usb start fatload usb 0 11000000 aml_autoscript autoscr 11000000 ps : the installtonand script goes without any issue but after that i am not able to boot from nand if i remove the flash drive
  3. Hello balbes150 the box doesn't boot Android don;t know if it's some hw or sw problem ( i got some exceptions and the kernel crashes during boot) . I have it from friend of mine so no idea what's wrong with it. I hope it is software problem and that's why i tried to boot armbian. My question is do you find something wrong in the steps i try to boot: 1.Burned the ubuntu server image and copy gxbb_p201.dtb as dtb.img ( booting from uart show this as hostname -> gxb_p201_v1#) 2.after that from uart i tried with this commands -> usb start fatload usb 0 1020000 aml_autoscript autoscr 1020000 i am not sure for this options but i have seen them from aml_autoscript 3.the output is here -> LINK ( these are the last lines after enter the commands from uart) .Do you recognize them as output from armbian or the box try to boot Android ???
  4. I think the right dtb for my box is -> gxbb_p201.dtb (gxb_p201_v1# ) so i set this one as dtb.img and booted unfortunately i got kernel panic . Output is here . I have tried several other dtb files and neither of them works . Also i am not sure if the box has any hw problems because it doesn;t boot Android when left without USB flash drive.
  5. Hello everyone I have two amlogic boxes one is with s805 and another with s905 processor and neither of them has mmc slot . In this forum balbes150 has helped me with the boot script from uart . Now i try to boot from usb flash drive on s905 with following commands : usb start fatload usb 0 1020000 aml_autoscript autoscr 1020000 but the boot process stucked on this - > Link Appreciate any help.
  6. balbes150 thank you very much for your help . I have finally managed to install armbian on s805 . I have burned armbian on another flash drive and it has booted much faster unfortunately it stucked on Starting kernel ... After that i have changed the dtb . Now it boots Ok
  7. Here is the output link i havent tried with other dtb images but i guess meson8b_m201_1G.dtb should be mine i have tried dtb for m201 on Libreelec and it works also i have copied the meson8b_m201_1G.dtb from the dtb folder in the provided image. 1991 bytes read ## Executing script at 11000000 MMC: block number 0x1 exceeds max(0x0) ** Can't read from device 0 ** ** Unable to use mmc 0:1 for fatload ** reading uInitrd after 1hour the box outputted this : reading uInitrd 3331991 bytes read reading uImage 5694137 bytes read reading dtb.img 23306 bytes read ## Booting kernel from Legacy Image at 14000000 ... Image Name: Linux-3.10.99 Image Type: ARM Linux Kernel Image (gzip compressed) Data Size: 5694073 Bytes = 5.4 MiB Load Address: 00208000 Entry Point: 00208000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 15000000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 3331927 Bytes = 3.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 11800000 Booting using the fdt blob at 0x11800000 board_usb_stop cfg: 0 Uncompressing Kernel Image ... OK uboot time: -1804819678 us. EFUSE machid is not set. Using machid 0xf81 from environment From device tree /memory/ node aml_reserved_end property, for relocate ramdisk and fdt, relocate_addr: 0x5337001 Loading Ramdisk to 05009000, end 05336757 ... OK Loading Device Tree to 05000000, end 05008b09 ... OK Starting kernel ...
  8. here is the output of printenv : Link here is the output of help : Link and these are the commands i execute from UART: defenv setenv bootfromnand 0 setenv start_usb_autoscript "if fatload usb 0 11000000 s805_autoscript; then autoscr 11000000; fi; if fatload usb 1 11000000 s805_autoscript; then autoscr 11000000; fi; if fatload usb 2 11000000 s805_autoscript; then autoscr 11000000; fi; if fatload usb 3 11000000 s805_autoscript; then autoscr 11000000; fi;" setenv start_autoscript 'if usb start; then run start_usb_autoscript; fi; ' setenv bootcmd 'run start_autoscript; run storeboot' setenv reboot_mode normal saveenv reset
  9. Hello balbes150 i have managed to boot from UART and here is the output : i guess there is something wrong with my s805_autoscript ?? ( i have waited for more then 30min and nothing outputs) Also i have burned this image on my flash drive and i have copy paste meson8b_m201_1G.dtb to the root dir as dtb.img
  10. balbes150 please suggest any method to install aml_autoscript from usb flash drive . I have tried https://yadi.sk/d/c9kY4tuLuPF3Y/v04 and i have ended with "E:footer is wrong ; signature verification failed" ps: I don;t need to multiboot ( i need to install armbian to nand and no need to keep android)
  11. Hello can anyone explain me what does this two scripts do -> s805_autoscript and aml_autoscript
  12. Hello community Anyone who have tried to migrate from Libreelec to armbian ? or install armbian only via flash drive ???
  13. Hello balbes150 Thanks for replying me .
  14. Hello balbes150 yes i did the upgrade via USB stick the version i use to install was this also i had serious problems with libreelec after some time (1-2min or less) it freezes until i found that i have to change /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor to hotplug. Can you help me to install armbian with the USB stick ?
  15. Hello everyone i am new to armbian and really like the idea to install debian base distro on amlogic box . I have several s805 boxes m201d board unfortunately they don't have sd slot but i have manage to install libreelec on them through the android recovery menu. So can you help me on how to install armbian on this box is it possible to install armbian on box without sd card ??
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines