glego

Sorry, I was rambling a bit it was kinda late. It's a fresh install followed by an apt upgrade, then I've installed Docker. I don't understand why the old modules are deleted before reboot. Nevertheless the root cause is apt upgrade initiated a kernel update and removed the old modules. A reboot fixed the issue because it reloaded the new kernel.

Good point, it isn't present, I wonder why I didn't spot this... I've upgraded the system before installing docker... root@bpi2:~# ls /lib/modules 4.11.6-sunxi So checking the apt log, I remember there was an issue with the Bluetooth module but further no issues. Start-Date: 2017-10-16 22:39:09 Commandline: apt-get upgrade -y Upgrade: perl-modules:armhf (5.20.2-3+deb8u7, 5.20.2-3+deb8u9), libirs-export91:armhf (9.9.5.dfsg-9+deb8u11, 9.9.5.dfsg-9+deb8u14), perl:armhf (5.20.2-3+deb8u7, 5.20.2-3+deb8u9), libpam-modules-bin:armhf (1.1.8-3.1+deb8u2, 1.1.8-3.1+deb8u2+b1), libpam-modules:armhf (1.1.8-3.1+deb8u2, 1.1.8-3.1+deb8u2+b1), libdns-export100:armhf (9.9.5.dfsg-9+deb8u11, 9.9.5.dfsg-9+deb8u14), libxml2:armhf (2.9.1+dfsg1-5+deb8u4, 2.9.1+dfsg1-5+deb8u5), multiarch-support:armhf (2.19-18+deb8u9, 2.19-18+deb8u10), linux-image-next-sunxi:armhf (5.31, 5.32), linux-headers-next-sunxi:armhf (5.31, 5.32), libcurl3:armhf (7.38.0-4+deb8u5, 7.38.0-4+deb8u6), libgcrypt20:armhf (1.6.3-2+deb8u2, 1.6.3-2+deb8u4), debconf:armhf (1.5.56, 1.5.56+deb8u1), libisccc90:armhf (9.9.5.dfsg-9+deb8u11, 9.9.5.dfsg-9+deb8u14), debian-archive-keyring:armhf (2014.3, 2017.5~deb8u1), libc6:armhf (2.19-18+deb8u9, 2.19-18+deb8u10), libisc-export95:armhf (9.9.5.dfsg-9+deb8u11, 9.9.5.dfsg-9+deb8u14), libc6-dev:armhf (2.19-18+deb8u9, 2.19-18+deb8u10), curl:armhf (7.38.0-4+deb8u5, 7.38.0-4+deb8u6), libsoup2.4-1:armhf (2.48.0-1, 2.48.0-1+deb8u1), gnupg:armhf (1.4.18-7+deb8u3, 1.4.18-7+deb8u4), libisc95:armhf (9.9.5.dfsg-9+deb8u11, 9.9.5.dfsg-9+deb8u14), libbind9-90:armhf (9.9.5.dfsg-9+deb8u11, 9.9.5.dfsg-9+deb8u14), perl-base:armhf (5.20.2-3+deb8u7, 5.20.2-3+deb8u9), libdns100:armhf (9.9.5.dfsg-9+deb8u11, 9.9.5.dfsg-9+deb8u14), locales:armhf (2.19-18+deb8u9, 2.19-18+deb8u10), base-files:armhf (8+deb8u8, 8+deb8u9), debconf-i18n:armhf (1.5.56, 1.5.56+deb8u1), libffi6:armhf (3.1-2+b2, 3.1-2+deb8u1), liblwres90:armhf (9.9.5.dfsg-9+deb8u11, 9.9.5.dfsg-9+deb8u14), libgnutls-deb0-28:armhf (3.3.8-6+deb8u5, 3.3.8-6+deb8u7), libc-dev-bin:armhf (2.19-18+deb8u9, 2.19-18+deb8u10), linux-libc-dev:armhf (3.16.43-2, 3.16.43-2+deb8u5), linux-dtb-next-sunxi:armhf (5.31, 5.32), libpam0g:armhf (1.1.8-3.1+deb8u2, 1.1.8-3.1+deb8u2+b1), bluez:armhf (5.23-2+b1, 5.23-2+deb8u1), libcurl3-gnutls:armhf (7.38.0-4+deb8u5, 7.38.0-4+deb8u6), libexpat1:armhf (2.1.0-6+deb8u3, 2.1.0-6+deb8u4), libisccfg90:armhf (9.9.5.dfsg-9+deb8u11, 9.9.5.dfsg-9+deb8u14), dnsutils:armhf (9.9.5.dfsg-9+deb8u11, 9.9.5.dfsg-9+deb8u14), mysql-common:armhf (5.5.55-0+deb8u1, 5.5.57-0+deb8u1), git:armhf (2.1.4-2.1+deb8u3, 2.1.4-2.1+deb8u5), libmysqlclient18:armhf (5.5.55-0+deb8u1, 5.5.57-0+deb8u1), gpgv:armhf (1.4.18-7+deb8u3, 1.4.18-7+deb8u4), bind9-host:armhf (9.9.5.dfsg-9+deb8u11, 9.9.5.dfsg-9+deb8u14), libisccfg-export90:armhf (9.9.5.dfsg-9+deb8u11, 9.9.5.dfsg-9+deb8u14), libgnutls-openssl27:armhf (3.3.8-6+deb8u5, 3.3.8-6+deb8u7), wpasupplicant:armhf (2.3-1+deb8u4, 2.3-1+deb8u5), libc-bin:armhf (2.19-18+deb8u9, 2.19-18+deb8u10), git-man:armhf (2.1.4-2.1+deb8u3, 2.1.4-2.1+deb8u5) Error: Sub-process /usr/bin/dpkg returned an error code (1) End-Date: 2017-10-16 22:47:22 So just a wild guess, after upgrading the system my session variables were pointing to the wrong directory? Well that's not it, I still have a session to my other bpi1, and when I type depmod command I have the same issue.. I've tried to reload the session variables, no luck. root@bpi1:~# ls /lib/modules 4.11.6-sunxi root@bpi1:~# depmod depmod: ERROR: could not open directory /lib/modules/4.11.5-sunxi: No such file or directory depmod: FATAL: could not search modules: No such file or directory Uname also reports wrong kernel root@bpi1:~# uname -r 4.11.5-sunxi Anyway, it's a kernel upgrade which caused the issue, I guess you have to reboot anyway. I'm just curious why it didn't keep the old kernel, that's what I'm used to it.

Hi, I'm Glego and this is my first post. I was just fiddling around with my old BananaPI M1 and M1+, and stumbled upon ARMbian, which has great appraisals on the Bananapi forum. I'm creating a cluster of various SBC's and thought ARMbian is the OS to go. Unfortunatly I had an issue when setting up Docker and wanted to share the resolution for future reference. However I couldn't find the root cause, so if any expert would be able to comment on why this is happening, I will be happy the do the tests again. Cheers, Glego Issue After installing docker-ce, the service is not starting: docker.service start request repeated too quickly, refusing to start. When manually starting the docker daemon it mentioned: 'overlay' not found as a supported filesystem on this host. I've resolved the issue by restarting the host, but I wonder why this issue occurred in the first place... Docker installation root@bpi2:~# apt-get install docker-ce Reading package lists... Done Building dependency tree Reading state information... Done docker-ce is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] y Setting up docker-ce (17.09.0~ce-0~debian) ... Job for docker.service failed. See 'systemctl status docker.service' and 'journalctl -xn' for details. invoke-rc.d: initscript docker, action "start" failed. dpkg: error processing package docker-ce (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: docker-ce E: Sub-process /usr/bin/dpkg returned an error code (1) root@bpi2:~# systemctl status docker ● docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; enabled) Active: failed (Result: start-limit) since Mon 2017-10-16 22:56:46 CEST; 19s ago Docs: https://docs.docker.com Process: 12988 ExecStart=/usr/bin/dockerd -H fd:// (code=exited, status=1/FAILURE) Main PID: 12988 (code=exited, status=1/FAILURE) Oct 16 22:56:46 bpi2 systemd[1]: docker.service: main process exited, code=exited, status=1/FAILURE Oct 16 22:56:46 bpi2 systemd[1]: Failed to start Docker Application Container Engine. Oct 16 22:56:46 bpi2 systemd[1]: Unit docker.service entered failed state. Oct 16 22:56:46 bpi2 systemd[1]: docker.service holdoff time over, scheduling restart. Oct 16 22:56:46 bpi2 systemd[1]: Stopping Docker Application Container Engine... Oct 16 22:56:46 bpi2 systemd[1]: Starting Docker Application Container Engine... Oct 16 22:56:46 bpi2 systemd[1]: docker.service start request repeated too quickly, refusing to start. Oct 16 22:56:46 bpi2 systemd[1]: Failed to start Docker Application Container Engine. Oct 16 22:56:46 bpi2 systemd[1]: Unit docker.service entered failed state. Docker Daemon root@bpi2:/var/lib# dockerd INFO[2017-10-16T23:14:11.797779579+02:00] libcontainerd: new containerd process, pid: 14950 ERRO[2017-10-16T23:14:12.850973636+02:00] 'overlay' not found as a supported filesystem on this host. Please ensure kernel is new enough and has overlay support loaded. ERRO[2017-10-16T23:14:12.874193322+02:00] 'overlay' not found as a supported filesystem on this host. Please ensure kernel is new enough and has overlay support loaded. INFO[2017-10-16T23:14:12.917922290+02:00] Graph migration to content-addressability took 0.00 seconds INFO[2017-10-16T23:14:12.925184043+02:00] Loading containers: start. WARN[2017-10-16T23:14:12.938031260+02:00] Running modprobe bridge br_netfilter failed with message: modprobe: ERROR: ../libkmod/libkmod.c:557 kmod_search_moddep() could not open moddep file '/lib/modules/4.11.5-sunxi/modules.dep.bin' modprobe: ERROR: ../libkmod/libkmod.c:557 kmod_search_moddep() could not open moddep file '/lib/modules/4.11.5-sunxi/modules.dep.bin' , error: exit status 1 WARN[2017-10-16T23:14:12.949860113+02:00] Running modprobe nf_nat failed with message: `modprobe: ERROR: ../libkmod/libkmod.c:557 kmod_search_moddep() could not open moddep file '/lib/modules/4.11.5-sunxi/modules.dep.bin'`, error: exit status 1 WARN[2017-10-16T23:14:12.961439978+02:00] Running modprobe xt_conntrack failed with message: `modprobe: ERROR: ../libkmod/libkmod.c:557 kmod_search_moddep() could not open moddep file '/lib/modules/4.11.5-sunxi/modules.dep.bin'`, error: exit status 1 Error starting daemon: Error initializing network controller: error obtaining controller instance: failed to create NAT chain: iptables failed: iptables -t nat -N DOCKER: modprobe: ERROR: ../libkmod/libkmod.c:557 kmod_search_moddep() could not open moddep file '/lib/modules/4.11.5-sunxi/modules.dep.bin' iptables v1.4.21: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. (exit status 3) ARMbian Version root@bpi2:/var/lib# cat /etc/armbian.txt -------------------------------------------------------------------------------- Title: Armbian 5.31 Bananapi Debian jessie next Kernel: Linux 4.11.5 Build date: 15.06.2017 Authors: http://www.armbian.com/authors Sources: http://github.com/igorpecovnik/lib Support: http://forum.armbian.com/ Changelog: http://www.armbian.com/logbook/ Documantation: http://docs.armbian.com/ --------------------------------------------------------------------------------