Looks like an interrupt was encountered during startup.This is the TTL startup log.
reading u-boot.ext
650183 bytes read in 376 ms (1.6 MiB/s)
## Starting application at 0x01000000 ...
[BL31]: tee size: 0
[BL31]: tee size: 0
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.9.0-arm-64 (root@vbox) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #20.10 SMP PREEMPT Wed Oct 14 12:04:42 MSK 2020
[ 0.000000] Machine model: Amlogic Meson GXL (S905X) P212 Development Board
[ 0.000000] efi: UEFI not found.
[ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000006b400000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000001000000-0x000000007fe5afff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7fa4c100-0x7fa4dfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000001000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007fe5afff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000010200000-0x000000007fe5afff]
[ 0.000000] Zeroed struct page in unavailable ranges: 421 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000001000000-0x000000007fe5afff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] percpu: Embedded 22 pages/cpu s51480 r8192 d30440 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 502177
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
[ 0.000000] Memory: 1634552K/2041196K available (16188K kernel code, 1308K rwdata, 6464K rodata, 3392K init, 927K bss, 144500K reserved, 262144K cma-reserved)
[ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x80/0x150 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000297] Console: colour dummy device 80x25
[ 0.000723] printk: console [tty0] enabled
[ 0.000826] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000847] pid_max: default: 32768 minimum: 301
[ 0.000951] LSM: Security Framework initializing
[ 0.001048] AppArmor: AppArmor initialized
[ 0.001107] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001131] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.002506] rcu: Hierarchical SRCU implementation.
[ 0.003425] EFI services will not be available.
[ 0.003714] smp: Bringing up secondary CPUs ...
[ 0.004286] Detected VIPT I-cache on CPU1
[ 0.004343] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.004880] Detected VIPT I-cache on CPU2
[ 0.004925] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.005451] Detected VIPT I-cache on CPU3
[ 0.005495] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.005567] smp: Brought up 1 node, 4 CPUs
[ 0.005632] SMP: Total of 4 processors activated.
[ 0.005643] CPU features: detected: 32-bit EL0 Support
[ 0.005655] CPU features: detected: CRC32 instructions
[ 0.015524] CPU: All CPU(s) started at EL2
[ 0.015585] alternatives: patching kernel code
[ 0.016870] devtmpfs: initialized
[ 0.022241] Registered cp15_barrier emulation handler
[ 0.022272] Registered setend emulation handler
[ 0.022287] KASLR disabled due to lack of seed
[ 0.022635] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.022669] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.029768] xor: measuring software checksum speed
[ 0.068166] 8regs : 2373.000 MB/sec
[ 0.108196] 32regs : 2723.000 MB/sec
[ 0.148236] arm64_neon: 2310.000 MB/sec
[ 0.148247] xor: using function: 32regs (2723.000 MB/sec)
[ 0.148305] pinctrl core: initialized pinctrl subsystem
[ 0.148844] DMI not present or invalid.
[ 0.149333] NET: Registered protocol family 16
[ 0.150896] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.150963] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.151105] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.151209] audit: initializing netlink subsys (disabled)
[ 0.151429] audit: type=2000 audit(0.148:1): state=initialized audit_enabled=0 res=1
[ 0.152437] thermal_sys: Registered thermal governor 'step_wise'
[ 0.152682] cpuidle: using governor ladder
[ 0.152722] cpuidle: using governor menu
[ 0.153052] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.153143] ASID allocator initialised with 65536 entries
[ 0.153919] Serial: AMBA PL011 UART driver
[ 0.178703] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.178729] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.178742] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.178754] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.180578] cryptd: max_cpu_qlen set to 1000
[ 0.248461] raid6: neonx8 gen() 2143 MB/s
[ 0.316514] raid6: neonx8 xor() 1608 MB/s
[ 0.384579] raid6: neonx4 gen() 2194 MB/s
[ 0.452641] raid6: neonx4 xor() 1593 MB/s
[ 0.520698] raid6: neonx2 gen() 2095 MB/s
[ 0.588756] raid6: neonx2 xor() 1472 MB/s
[ 0.656822] raid6: neonx1 gen() 1827 MB/s
[ 0.724870] raid6: neonx1 xor() 1249 MB/s
[ 0.792929] raid6: int64x8 gen() 1492 MB/s
[ 0.860999] raid6: int64x8 xor() 784 MB/s
[ 0.929033] raid6: int64x4 gen() 1666 MB/s
[ 0.997089] raid6: int64x4 xor() 840 MB/s
[ 1.065149] raid6: int64x2 gen() 1420 MB/s
[ 1.133200] raid6: int64x2 xor() 730 MB/s
[ 1.201251] raid6: int64x1 gen() 1059 MB/s
[ 1.269322] raid6: int64x1 xor() 559 MB/s
[ 1.269332] raid6: using algorithm neonx4 gen() 2194 MB/s
[ 1.269341] raid6: .... xor() 1593 MB/s, rmw enabled
[ 1.269351] raid6: using neon recovery algorithm
[ 1.269859] ACPI: Interpreter disabled.
[ 1.270993] iommu: Default domain type: Translated
[ 1.271253] vgaarb: loaded
[ 1.271849] SCSI subsystem initialized
[ 1.272247] usbcore: registered new interface driver usbfs
[ 1.272297] usbcore: registered new interface driver hub
[ 1.272366] usbcore: registered new device driver usb
[ 1.272767] pps_core: LinuxPPS API ver. 1 registered
[ 1.272780] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.272803] PTP clock support registered
[ 1.272839] EDAC MC: Ver: 3.0.0
[ 1.273677] FPGA manager framework
[ 1.273775] Advanced Linux Sound Architecture Driver Initialized.
[ 1.274312] NetLabel: Initializing
[ 1.274328] NetLabel: domain hash size = 128
[ 1.274337] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.274391] NetLabel: unlabeled traffic allowed by default
[ 1.274892] clocksource: Switched to clocksource arch_sys_counter
[ 1.275156] VFS: Disk quotas dquot_6.6.0
[ 1.275216] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.275355] FS-Cache: Loaded
[ 1.275829] AppArmor: AppArmor Filesystem Enabled
[ 1.276433] pnp: PnP ACPI: disabled
[ 1.281559] NET: Registered protocol family 2
[ 1.282072] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 1.282125] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 1.282243] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 1.282453] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.282611] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 1.282666] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 1.282873] NET: Registered protocol family 1
[ 1.283361] RPC: Registered named UNIX socket transport module.
[ 1.283384] RPC: Registered udp transport module.
[ 1.283394] RPC: Registered tcp transport module.
[ 1.283402] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.283419] NET: Registered protocol family 44
[ 1.283439] PCI: CLS 0 bytes, default 64
[ 1.283623] Trying to unpack rootfs image as initramfs...
[ 1.700498] Freeing initrd memory: 9776K
[ 1.701400] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 1.704821] Initialise system trusted keyrings
[ 1.705015] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[ 1.709764] zbud: loaded
[ 1.711142] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.711436] FS-Cache: Netfs 'nfs' registered for caching
[ 1.711996] NFS: Registering the id_resolver key type
[ 1.712032] Key type id_resolver registered
[ 1.712042] Key type id_legacy registered
[ 1.712128] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.712141] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 1.713122] FS-Cache: Netfs 'cifs' registered for caching
[ 1.713417] Key type cifs.spnego registered
[ 1.713439] Key type cifs.idmap registered
[ 1.713463] ntfs: driver 2.1.32 [Flags: R/W].
[ 1.714001] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1.718461] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 1.720042] ocfs2: Registered cluster interface o2cb
[ 1.720254] OCFS2 User DLM kernel interface loaded
[ 1.721930] gfs2: GFS2 installed
[ 1.759867] NET: Registered protocol family 38
[ 1.759898] Key type asymmetric registered
[ 1.759909] Asymmetric key parser 'x509' registered
[ 1.759920] Asymmetric key parser 'pkcs8' registered
[ 1.759973] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 1.760146] io scheduler mq-deadline registered
[ 1.760160] io scheduler kyber registered
[ 1.760317] io scheduler bfq registered
[ 1.773962] soc soc0: Amlogic Meson Unknown (Unknown) Revision 2a:e (c5:2) Detected
[ 1.777868] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 1.779754] Serial: AMBA driver
[ 1.780130] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 12, base_baud = 1500000) is a meson_uart
[ 1.780296] serial serial0: tty port ttyAML6 registered
[ 1.780687] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 15, base_baud = 1500000) is a meson_uart
[ 2.853887] printk: console [ttyAML0] enabled
[ 2.871082] brd: module loaded
[ 2.878828] loop: module loaded
[ 2.879704] Loading iSCSI transport class v2.0-870.
[ 2.881782] iscsi: registered transport (tcp)
[ 2.889253] libphy: Fixed MDIO Bus: probed
[ 2.891304] VFIO - User Level meta-driver version: 0.3
[ 2.896039] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.901145] ehci-pci: EHCI PCI platform driver
[ 2.905573] ehci-platform: EHCI generic platform driver
[ 2.910836] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.916855] ohci-pci: OHCI PCI platform driver
[ 2.921265] ohci-platform: OHCI generic platform driver
[ 2.926876] usbcore: registered new interface driver usb-storage
[ 2.932547] mousedev: PS/2 mouse device common for all mice
[ 2.938787] i2c /dev entries driver
[ 2.945048] sdhci: Secure Digital Host Controller Interface driver
[ 2.947475] sdhci: Copyright(c) Pierre Ossman
[ 2.951981] Synopsys Designware Multimedia Card Interface Driver
[ 2.971820] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 2.999412] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 3.027321] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.028283] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.033941] meson-sm: secure-monitor enabled
[ 3.038391] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 3.045428] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 3.053514] hid: raw HID events driver (C) Jiri Kosina
[ 3.058489] usbcore: registered new interface driver usbhid
[ 3.063707] usbhid: USB HID core driver
[ 3.068266] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[BL31]: tee size: 0
[ 3.079012] no UART detected at 0x1
[ 3.083501] NET: Registered protocol family 17
[ 3.084215] Key type dns_resolver registered
[ 3.088690] registered taskstats version 1
[ 3.092268] Loading compiled-in X.509 certificates
[ 3.097252] zswap: loaded using pool lzo/zbud
[ 3.101604] Key type ._fscrypt registered
[ 3.105248] Key type .fscrypt registered
[ 3.109119] Key type fscrypt-provisioning registered
[ 3.114829] Btrfs loaded, crc32c=crc32c-generic
[ 3.116964] mmc1: new HS200 MMC card at address 0001
[ 3.124271] mmcblk1: mmc1:0001 Y1P008 7.28 GiB
[ 3.128360] mmcblk1boot0: mmc1:0001 Y1P008 partition 1 4.00 MiB
[ 3.134225] mmcblk1boot1: mmc1:0001 Y1P008 partition 2 4.00 MiB
[ 3.137640] Key type encrypted registered
[ 3.139939] mmcblk1rpmb: mmc1:0001 Y1P008 partition 3 4.00 MiB, chardev (241:0)
[ 3.143648] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.172621] meson-drm d0100000.vpu: Queued 3 outputs on vpu
[ 3.198943] meson-dw-hdmi c883a000.hdmi-tx: Unsupported HDMI controller (0d0d:0d:0d)
[ 3.201222] ------------[ cut here ]------------
[ 3.205633] WARNING: CPU: 3 PID: 33 at drivers/regulator/core.c:2089 _regulator_put.part.0+0x154/0x160
[ 3.214847] Modules linked in:
[ 3.217869] CPU: 3 PID: 33 Comm: kworker/3:1 Not tainted 5.9.0-arm-64 #20.10
[ 3.224852] Hardware name: Amlogic Meson GXL (S905X) P212 Development Board (DT)
[ 3.232192] Workqueue: events deferred_probe_work_func
[ 3.237274] pstate: 80000005 (Nzcv daif -PAN -UAO BTYPE=--)
[ 3.242794] pc : _regulator_put.part.0+0x154/0x160
[ 3.247537] lr : regulator_put+0x38/0x50
[ 3.251416] sp : ffff800010143930
[ 3.254694] x29: ffff800010143930 x28: ffff800012a07000
[ 3.259955] x27: ffff80001010bcd8 x26: 00000000ffffffed
[ 3.265216] x25: ffff00007f325480 x24: ffff00006974d000
[ 3.270477] x23: 0000000000000010 x22: ffff8000101439e8
[ 3.275739] x21: ffff00007f279c00 x20: ffff800012ad7150
[ 3.281000] x19: ffff00007f324900 x18: 0000000000000010
[ 3.286261] x17: 0000000000006a0c x16: 000000000000698c
[ 3.291522] x15: 00000b4b011a0adc x14: 00000000000002d7
[ 3.296783] x13: 000000000000032b x12: 0000000000000001
[ 3.302045] x11: 0000000000000002 x10: 00000000000009c0
[ 3.307306] x9 : ffff800010143760 x8 : ffff00007f27a620
[ 3.312567] x7 : ffff00007f279c00 x6 : 0000000000000000
[ 3.317828] x5 : ffff000069b12a1c x4 : 0000000000000000
[ 3.323090] x3 : ffff800012ad7520 x2 : ffff00007f279c00
[ 3.328351] x1 : 0000000000000000 x0 : 0000000000000001
[ 3.333613] Call trace:
[ 3.336031] _regulator_put.part.0+0x154/0x160
[ 3.340428] regulator_put+0x38/0x50
[ 3.343967] devm_regulator_release+0x14/0x20
[ 3.348279] release_nodes+0x1b0/0x228
[ 3.351986] devres_release_group+0x90/0xe8
[ 3.356126] component_bind_all+0x114/0x260
[ 3.360267] meson_drv_bind_master+0x364/0x488
[ 3.364664] meson_drv_bind+0x14/0x28
[ 3.368287] try_to_bring_up_master+0x168/0x1d0
[ 3.372772] component_master_add_with_match+0xb4/0x100
[ 3.377947] meson_drv_probe+0xd4/0x128
[ 3.381742] platform_drv_probe+0x54/0xa8
[ 3.385709] really_probe+0xe4/0x3b0
[ 3.389245] driver_probe_device+0x58/0xb8
[ 3.393299] __device_attach_driver+0x84/0xc8
[ 3.397613] bus_for_each_drv+0x78/0xc8
[ 3.401406] __device_attach+0xf0/0x150
[ 3.405202] device_initial_probe+0x14/0x20
[ 3.409342] bus_probe_device+0x9c/0xa8
[ 3.413137] deferred_probe_work_func+0x74/0xb0
[ 3.417625] process_one_work+0x1a0/0x328
[ 3.421589] worker_thread+0x1f8/0x420
[ 3.425300] kthread+0x140/0x160
[ 3.428491] ret_from_fork+0x10/0x34
[ 3.432025] ---[ end trace 014dcf72c59e749d ]---
[ 3.436789] meson-drm d0100000.vpu: failed to bind c883a000.hdmi-tx (ops meson_dw_hdmi_ops): -19
[ 3.445329] meson-drm d0100000.vpu: Couldn't bind all components
[ 3.451558] meson-drm d0100000.vpu: master bind failed: -19
[ 3.458691] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[ 3.463391] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[ 3.469564] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[ 3.475419] meson8b-dwmac c9410000.ethernet: no reset control found
[ 3.482347] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 3.488760] meson8b-dwmac c9410000.ethernet: DWMAC1000
[ 3.493875] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[ 3.501292] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[ 3.508709] meson8b-dwmac c9410000.ethernet: COE Type 2
[ 3.513882] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[ 3.520868] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[ 3.527328] meson8b-dwmac c9410000.ethernet: Normal descriptors
[ 3.533119] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[ 3.538896] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 3.547244] libphy: stmmac: probed
[ 3.551570] dwc3-meson-g12a d0078080.usb: USB2 ports: 2
[ 3.555388] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[ 4.095936] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[ 4.097582] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[ 4.104769] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 4.113148] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.116990] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 4.124670] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
[ 4.133884] xhci-hcd xhci-hcd.0.auto: irq 42, io mem 0xc9000000
[ 4.140001] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[ 4.147904] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.155058] usb usb1: Product: xHCI Host Controller
[ 4.159888] usb usb1: Manufacturer: Linux 5.9.0-arm-64 xhci-hcd
[ 4.165752] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 4.171096] hub 1-0:1.0: USB hub found
[ 4.174311] hub 1-0:1.0: 2 ports detected
[ 4.178553] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.183719] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 4.191294] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 4.197800] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.205877] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
[ 4.213970] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.221126] usb usb2: Product: xHCI Host Controller
[ 4.225955] usb usb2: Manufacturer: Linux 5.9.0-arm-64 xhci-hcd
[ 4.231820] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 4.237098] hub 2-0:1.0: USB hub found
[ 4.240389] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 4.249999] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
[ 4.281059] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
g[ 4.285886] meson-gx-mmc d0070000.mmc: no support for card's volts
[ 4.288014] mmc2: error -22 whilst initialising SDIO card
et_dvfs_info 002b
[ 4.309444] simple-framebuffer 7fe5b000.framebuffer: framebuffer at 0x7fe5b000, 0x195000 bytes, mapped to 0x(____ptrval____)
[ 4.315076] simple-framebuffer 7fe5b000.framebuffer: format=x8r8g8b8, mode=720x576x32, linelength=2880
[ 4.329817] Console: switching to colour frame buffer device 90x36
[ 4.335109] simple-framebuffer 7fe5b000.framebuffer: fb0: simplefb registered!
[ 4.343255] libphy: mdio_mux: probed
[ 4.354147] libphy: mdio_mux: probed
[ 4.356373] printk: console [netcon0] enabled
[ 4.356495] netconsole: network logging started
[ 4.363272] ALSA device list:
[ 4.366700] No soundcards found.
[ 4.371641] Freeing unused kernel memory: 3392K
[ 4.395211] Run /init as init process
[ 4.510993] usb 1-2: new high-speed USB device number 2 using xhci-hcd
[ 4.667508] usb 1-2: New USB device found, idVendor=05e3, idProduct=0723, bcdDevice=94.54
[ 4.675234] usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=2
[ 4.691234] usb 1-2: Product: USB Storage
[ 4.693841] usb 1-2: Manufacturer: Generic
[ 4.696434] usb 1-2: SerialNumber: 000000009454
[ 4.702373] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 4.708033] scsi host0: usb-storage 1-2:1.0
[ 4.739959] usbcore: registered new interface driver uas
[ 4.843513] mmc1: tuning execution failed: -5
[ 4.846820] mmc1: tuning execution failed: -5
[ 4.850470] mmc1: tuning execution failed: -5
[ 4.942738] mmc1: tuning execution failed: -5
[ 4.953768] mmc1: tried to HW reset card, got error -5
[ 4.957915] random: fast init done
[ 4.960833] blk_update_request: I/O error, dev mmcblk1, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 5.068676] mmc1: tuning execution failed: -5
[ 5.076918] mmc1: tried to HW reset card, got error -5
[ 5.081092] blk_update_request: I/O error, dev mmcblk1, sector 8 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 5.188017] mmc1: tuning execution failed: -5
[ 5.196594] mmc1: tried to HW reset card, got error -5
[ 5.200915] blk_update_request: I/O error, dev mmcblk1, sector 9 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5.200948] blk_update_request: I/O error, dev mmcblk1, sector 10 op 0x0:(READ) flags 0x0 phys_seg 6 prio class 0
[ 5.210470] Buffer I/O error on dev mmcblk1, logical block 9, async page read
[ 5.227786] Buffer I/O error on dev mmcblk1, logical block 10, async page read
[ 5.234871] Buffer I/O error on dev mmcblk1, logical block 11, async page read
[ 5.242097] Buffer I/O error on dev mmcblk1, logical block 12, async page read
[ 5.249186] Buffer I/O error on dev mmcblk1, logical block 13, async page read
[ 5.256415] Buffer I/O error on dev mmcblk1, logical block 14, async page read
[ 5.263503] Buffer I/O error on dev mmcblk1, logical block 15, async page read
[ 5.378290] mmc1: tuning execution failed: -5
[ 5.383582] mmc1: tried to HW reset card, got error -5
[ 5.485759] mmc1: tuning execution failed: -5
[ 5.494326] mmc1: tried to HW reset card, got error -5
[ 5.498517] blk_update_request: I/O error, dev mmcblk1boot0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 5.509407] blk_update_request: I/O error, dev mmcblk1boot1, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0
[ 5.521989] blk_update_request: I/O error, dev mmcblk1boot0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5.522261] blk_update_request: I/O error, dev mmcblk1boot0, sector 1 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0
[ 5.532201] Buffer I/O error on dev mmcblk1boot0, logical block 0, async page read
[ 5.550216] Buffer I/O error on dev mmcblk1boot0, logical block 1, async page read
[ 5.557783] Buffer I/O error on dev mmcblk1boot0, logical block 2, async page read
[ 5.567337] blk_update_request: I/O error, dev mmcblk1boot1, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 5.567538] blk_update_request: I/O error, dev mmcblk1boot1, sector 1 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0
[ 5.731217] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 9454 PQ: 0 ANSI: 0
[ 5.744982] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.756644] mmc1: tuning execution failed: -5
[ 5.759482] mmc1: tried to HW reset card, got error -5
[ 5.851953] sd 0:0:0:0: [sda] 30785536 512-byte logical blocks: (15.8 GB/14.7 GiB)
[ 5.862491] mmc1: tuning execution failed: -5
[ 5.865457] sd 0:0:0:0: [sda] Write Protect is off
[ 5.868936] mmc1: tried to HW reset card, got error -5
[ 5.879573] sd 0:0:0:0: [sda] No Caching mode page found
[ 5.884156] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5.917959] sda: sda1 sda2
[ 5.932289] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 6.048871] mmc1: tuning execution failed: -5
[ 6.052330] mmc1: tried to HW reset card, got error -5
[ 6.152616] mmc1: tuning execution failed: -5
[ 6.159164] mmc1: tried to HW reset card, got error -5
[ 6.680812] EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: data=writeback
[ 7.587906] systemd[1]: System time before build time, advancing clock.
[ 7.700177] NET: Registered protocol family 10
[ 7.734427] Segment Routing with IPv6
[ 7.781966] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 7.816263] systemd[1]: Detected architecture arm64.
[ 7.865889] systemd[1]: Set hostname to <arm-64>.
[ 8.336479] systemd[1]: /etc/systemd/system/serial-getty@.service.d/override.conf:5: Unknown lvalue 'After' in section 'Service', ignoring
[ 8.353745] systemd[1]: /etc/systemd/system/serial-getty@.service.d/override.conf:5: Unknown lvalue 'After' in section 'Service', ignoring
[ 8.371894] systemd[1]: /etc/systemd/system/getty@.service.d/override.conf:5: Unknown lvalue 'After' in section 'Service', ignoring
[ 8.464881] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.477169] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.481130] systemd[1]: Reached target System Time Synchronized.
[ 8.490569] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.497856] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 8.504925] systemd[1]: Reached target Swap.
[ 8.511367] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.718019] EXT4-fs (sda2): re-mounted. Opts: commit=600,errors=remount-ro
[ 9.663661] SError Interrupt on CPU3, code 0xbf000002 -- SError
[ 9.663665] CPU: 3 PID: 357 Comm: systemd-udevd Tainted: G WC 5.9.0-arm-64 #20.10
[ 9.663668] Hardware name: Amlogic Meson GXL (S905X) P212 Development Board (DT)
[ 9.663669] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--)
[ 9.663671] pc : el1_sync_handler+0xf8/0x130
[ 9.663672] lr : el1_sync+0x7c/0x100
[ 9.663673] sp : ffff8000103ab750
[ 9.663675] x29: ffff8000103ab750 x28: ffff000068401c00
[ 9.663678] x27: 0000000000000100 x26: 0000000000000000
[ 9.663681] x25: 0000000000000001 x24: ffff80000a230270
[ 9.663685] x23: 0000000080000005 x22: ffff80000a225f08
[ 9.663688] x21: ffff8000103ab8a0 x20: 0000ffffffffffff
[ 9.663691] x19: ffff00006acf6148 x18: 0000000000000001
[ 9.663694] x17: 0000000000000001 x16: 0000000000000019
[ 9.663697] x15: ffff000068402068 x14: ffffffffffffffff
[ 9.663700] x13: 0000000000000000 x12: 0101010101010101
[ 9.663704] x11: 0000000000000040 x10: ffff800012a37ef8
[ 9.663707] x9 : ffff800012a37ef0 x8 : ffff00007cc026f0
[ 9.663710] x7 : 0000000000000000 x6 : 0000000000000000
[ 9.663713] x5 : ffff00007cc026c8 x4 : ffff800010c06000
[ 9.663716] x3 : 0000000096000210 x2 : 0000002200000000
[ 9.663719] x1 : 0000000000000000 x0 : ffff8000103ab760
[ 9.663723] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 9.663726] CPU: 3 PID: 357 Comm: systemd-udevd Tainted: G WC 5.9.0-arm-64 #20.10
[ 9.663728] Hardware name: Amlogic Meson GXL (S905X) P212 Development Board (DT)
[ 9.663729] Call trace:
[ 9.663730] dump_backtrace+0x0/0x1a0
[ 9.663731] show_stack+0x18/0x28
[ 9.663732] dump_stack+0xc0/0x11c
[ 9.663734] panic+0x15c/0x31c
[ 9.663735] nmi_panic+0x8c/0x90
[ 9.663737] arm64_serror_panic+0x78/0x84
[ 9.663738] do_serror+0x78/0x180
[ 9.663739] el1_error+0x8c/0x108
[ 9.663741] el1_sync_handler+0xf8/0x130
[ 9.663742] el1_sync+0x7c/0x100
[ 9.663744] lima_mmu_init+0x40/0x118 [lima]
[ 9.663745] lima_device_init+0x1b8/0x5f0 [lima]
[ 9.663746] lima_pdev_probe+0xa0/0x190 [lima]
[ 9.663748] platform_drv_probe+0x54/0xa8
[ 9.663749] really_probe+0xe4/0x3b0
[ 9.663751] driver_probe_device+0x58/0xb8
[ 9.663752] device_driver_attach+0x74/0x80
[ 9.663753] __driver_attach+0x58/0xe0
[ 9.663755] bus_for_each_dev+0x70/0xc0
[ 9.663756] driver_attach+0x24/0x30
[ 9.663757] bus_add_driver+0x14c/0x1f0
[ 9.663759] driver_register+0x64/0x120
[ 9.663760] __platform_driver_register+0x48/0x58
[ 9.663762] lima_platform_driver_init+0x24/0x1000 [lima]
[ 9.663763] do_one_initcall+0x54/0x1bc
[ 9.663764] do_init_module+0x54/0x200
[ 9.663766] load_module+0x1de8/0x23f0
[ 9.663767] __do_sys_finit_module+0xd8/0xf0
[ 9.663769] __arm64_sys_finit_module+0x20/0x30
[ 9.663770] el0_svc_common.constprop.0+0x74/0x1f0
[ 9.663771] do_el0_svc+0x24/0x90
[ 9.663773] el0_sync_handler+0x180/0x2f8
[ 9.663774] el0_sync+0x158/0x180
[ 9.663793] SMP: stopping secondary CPUs
[ 9.663794] Kernel Offset: disabled
[ 9.663796] CPU features: 0x0040002,20002004
[ 9.663797] Memory Limit: none
In the Android system can know the dtb file is gxlx2_p291_2g.I extracted the DTB file and put it into the DTB folder. It doesn't seem to start.