123martin

This prefix in the /etc/fstab for the boot partition is missing after generating with armbian-install. (I had the same issue with the latest Bullseye image for the ODROID-M1)

I have done some more tests (wondering why it seems to poweroff just by showing the login screen): The HDMI to VGA adapter in combination with the usb hub is causing the power loss. If only one is connected everything is doing fine. I have not had this behaviour when using Bananian. Is there anything I can try or adjust?

Here you go: Time CPU load %cpu %sys %usr %nice %io %irq CPU PMIC DC-IN C.St. 13:07:49: 960MHz 0.25 11% 8% 2% 0% 0% 0% 37.6°C 27.2°C 4.92V 0/6 13:07:54: 960MHz 0.23 6% 6% 0% 0% 0% 0% 37.7°C 27.1°C 4.95V 0/6 13:08:00: 960MHz 0.21 7% 7% 0% 0% 0% 0% 37.5°C 26.9°C 4.92V 0/6 # usb hub (with mouse and keyboard) connected 13:08:06: 960MHz 0.19 10% 8% 1% 0% 0% 0% 38.3°C 28.2°C 4.88V 0/6 13:08:11: 960MHz 0.18 8% 7% 1% 0% 0% 0% 37.5°C 27.6°C 4.89V 0/6 13:08:17: 960MHz 0.16 6% 6% 0% 0% 0% 0% 37.5°C 28.2°C 4.89V 0/6 # usb hub disconnected 13:08:23: 960MHz 0.29 8% 7% 0% 0% 0% 0% 38.0°C 27.9°C 4.93V 0/6 13:08:29: 528MHz 0.27 6% 6% 0% 0% 0% 0% 38.0°C 27.6°C 4.94V 0/6 13:08:34: 960MHz 0.25 6% 6% 0% 0% 0% 0% 37.9°C 27.6°C 4.94V 0/6 # usb hub connected again 13:08:40: 960MHz 0.31 12% 10% 1% 0% 0% 0% 38.2°C 28.6°C 4.89V 0/6 13:08:46: 960MHz 0.28 6% 6% 0% 0% 0% 0% 37.7°C 28.7°C 4.87V 0/6 13:08:52: 528MHz 0.26 7% 6% 0% 0% 0% 0% 37.7°C 28.6°C 4.87V 0/6

I tried the Armbian_5.34.171119_Bananapi_Debian_stretch_next_4.13.13: it seems to have problems, when using an usb hub. Connected when booting after showing the login it seems to have a power loss. Connecting the hub after login it take some time and then the same: the BananaPi is complete off. I already checked the cables an power supply.

No problem at all. Could you also include the build of Banana Pi Stretch images please?

Great, thanks.

Stretch-Builds for cubietruck would be great