Jagan

Members
  • Content Count

    5
  • Joined

  • Last visited

  1. Hi, I'm using LCD panel[1] and OV5640 camera sensor on SoPine and Pine64 LTS and trying to follow steps mentioned here[2]. It hangs while graphics initialize Welcome to Ubuntu 16.04.5 LTS! [ OK ] Created slice system.slice. Starting Accounts Service... [ OK ] Started Accounts Service. [ OK ] Reached target graphical.target. << hang here >> any help? [2] http://wiki.pine64.org/index.php/SOPINE_Armbian_LCD_and_Camera [1] https://www.pine64.org/?product=7-lcd-touch-screen-panel
  2. I'm trying to use bsp kernel from vendor which 3.10 on latest mainline u-boot for a64 sunxi boards. I've seen 32 lands will work[1] did anyone tried on 64 lands, I'm getting kernel boot hang[2]. tweaked some dw ddr pll but no help, I'm writing here did any armbian user might have tried this. Any help? [1] http://linux-sunxi.org/Mainline_U-Boot#Legacy_kernel_won.27t_start [2] https://paste.ubuntu.com/26216519/
  3. Sorry I've seen same issue with different SD card, I see /boot/boot.cmd has setenv fdt_file "rk3288-miqi.dtb" which I've changed to rk3288-tinker.dtb but issue still there.
  4. Yes, I'm using Class 10 Kingston and formatted as well. Still the same issue.
  5. Hi, I've downloaded Ubuntu-mainline image at https://www.armbian.com/tinkerboard/ and written to SD as below but Hang while booting. # dd if=Armbian_5.35_Tinkerboard_Ubuntu_xenial_next_4.13.16_desktop.img of=/dev/mmcblk0 5742592+0 records in 5742592+0 records out 2940207104 bytes (2.9 GB, 2.7 GiB) copied, 481.509 s, 6.1 MB/s Log: U-Boot SPL 2017.09-armbian (Nov 22 2017 - 17:12:11) Returning to boot ROM... U-Boot 2017.09-armbian (Nov 22 2017 - 17:12:11 +0100) Model: Tinker-RK3288 DRAM: 2 GiB MMC: dwmmc@ff0c0000: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Model: Tinker-RK3288 Net: eth0: ethernet@ff290000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device Scanning mmc 1:1... Found U-Boot script /boot/boot.scr 1485 bytes read in 26 ms (55.7 KiB/s) ## Executing script at 00000000 U-boot loaded from eMMC 106 bytes read in 21 ms (4.9 KiB/s) 42451 bytes read in 48 ms (863.3 KiB/s) 4616543 bytes read in 241 ms (18.3 MiB/s) 8384056 bytes read in 410 ms (19.5 MiB/s) ## Loading init Ramdisk from Legacy Image at 21000000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 4616479 Bytes = 4.4 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 01f00000 Booting using the fdt blob at 0x1f00000 Loading Ramdisk to 0fb98000, end 0ffff11f ... OK Loading Device Tree to 0fb8a000, end 0fb975d2 ... OK Starting kernel ...