Jagan
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Jagan
-
-
I'm trying to use bsp kernel from vendor which 3.10 on latest mainline u-boot for a64 sunxi boards. I've seen 32 lands will work[1] did anyone tried on 64 lands, I'm getting kernel boot hang[2]. tweaked some dw ddr pll but no help, I'm writing here did any armbian user might have tried this.
Any help?
[1] http://linux-sunxi.org/Mainline_U-Boot#Legacy_kernel_won.27t_start
-
Sorry I've seen same issue with different SD card, I see /boot/boot.cmd has setenv fdt_file "rk3288-miqi.dtb" which I've changed to rk3288-tinker.dtb but issue still there.
-
Yes, I'm using Class 10 Kingston and formatted as well. Still the same issue.
-
Hi,
I've downloaded Ubuntu-mainline image at https://www.armbian.com/tinkerboard/
and written to SD as below but Hang while booting.
# dd if=Armbian_5.35_Tinkerboard_Ubuntu_xenial_next_4.13.16_desktop.img of=/dev/mmcblk0
5742592+0 records in
5742592+0 records out
2940207104 bytes (2.9 GB, 2.7 GiB) copied, 481.509 s, 6.1 MB/sLog:
U-Boot SPL 2017.09-armbian (Nov 22 2017 - 17:12:11)
Returning to boot ROM...
U-Boot 2017.09-armbian (Nov 22 2017 - 17:12:11 +0100)Model: Tinker-RK3288
DRAM: 2 GiB
MMC: dwmmc@ff0c0000: 1
*** Warning - bad CRC, using default environmentIn: serial
Out: serial
Err: serial
Model: Tinker-RK3288
Net: eth0: ethernet@ff290000
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
1485 bytes read in 26 ms (55.7 KiB/s)
## Executing script at 00000000
U-boot loaded from eMMC
106 bytes read in 21 ms (4.9 KiB/s)
42451 bytes read in 48 ms (863.3 KiB/s)
4616543 bytes read in 241 ms (18.3 MiB/s)
8384056 bytes read in 410 ms (19.5 MiB/s)
## Loading init Ramdisk from Legacy Image at 21000000 ...
Image Name: uInitrd
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 4616479 Bytes = 4.4 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Ramdisk to 0fb98000, end 0ffff11f ... OK
Loading Device Tree to 0fb8a000, end 0fb975d2 ... OKStarting kernel ...
SoPine/Pine64 LTS: Ubuntu Mate is not booting
in Beginners
Posted
Hi,
I'm using LCD panel[1] and OV5640 camera sensor on SoPine and Pine64 LTS and trying to follow steps mentioned here[2]. It hangs while graphics initialize
Welcome to Ubuntu 16.04.5 LTS!
[ OK ] Created slice system.slice.
Starting Accounts Service...
[ OK ] Started Accounts Service.
[ OK ] Reached target graphical.target.
<< hang here >>
any help?
[2] http://wiki.pine64.org/index.php/SOPINE_Armbian_LCD_and_Camera
[1] https://www.pine64.org/?product=7-lcd-touch-screen-panel