Gary Blake ヅ

Great work as always Igor!

I've just donated 40 euros. Thanks for the great support guys!

I'll be back home and at the hardware tomorrow night. I will give it a go then. Thanks

I just checked and my log has the power up issue so it sounds like main is onto the problem and has a fix.

This problem has been reported here: http://forum.armbian.com/index.php/topic/691-banana-pro-testers-wanted-sata-drive-not-working-on-some-boards/

That's a different problem alexia. You would not get the chance to mount with this problem.

Thats a working SATA drive after update. What does that mean?

root@bananapi:~# apt-get install linux-image-next-sunxi Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: linux-image-next-sunxi 1 upgraded, 0 newly installed, 0 to remove and 76 not upgraded. Need to get 13.0 MB of archives. After this operation, 11.6 MB of additional disk space will be used. Get:1 http://apt.armbian.com/ jessie/main linux-image-next-sunxi armhf 5.00 [13. 0 MB] Fetched 13.0 MB in 15s (831 kB/s) (Reading database ... 49566 files and directories currently installed.) Preparing to unpack .../linux-image-next-sunxi_5.00_armhf.deb ... Unpacking linux-image-next-sunxi (5.00) over (4.5) ... Setting up linux-image-next-sunxi (5.00) ... root@bananapi:~# apt-get install linux-dtb-next-sunxi Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: linux-dtb-next-sunxi 1 upgraded, 0 newly installed, 0 to remove and 75 not upgraded. Need to get 63.3 kB of archives. After this operation, 494 kB of additional disk space will be used. Get:1 http://apt.armbian.com/ jessie/main linux-dtb-next-sunxi armhf 5.00 [63.3 kB] Fetched 63.3 kB in 0s (107 kB/s) (Reading database ... 50291 files and directories currently installed.) Preparing to unpack .../linux-dtb-next-sunxi_5.00_armhf.deb ... Unpacking linux-dtb-next-sunxi (5.00) over (4.5) ... Setting up linux-dtb-next-sunxi (5.00) ... root@bananapi:~# blkid /dev/mmcblk0: PTUUID="000380a6" PTTYPE="dos" /dev/mmcblk0p1: UUID="b5d952cd-46ba-4d79-b669-ba961ec9559f" TYPE="ext4" PARTUUID="000380a6-01" /dev/sda1: UUID="38f93141-1d36-434f-9f53-ca0d6916fb0e" TYPE="ext4" PARTUUID="1bd8dd3e-01" root@bananapi:~# reboot Broadcast message from root@bananapi (pts/0) (Sun Feb 14 20:30:48 2016): The system is going down for reboot NOW! root@bananapi:~# login as: root root@192.168.0.8's password: ____ | __ ) __ _ _ __ __ _ _ __ __ _ | _ \ / _` | '_ \ / _` | '_ \ / _` | | |_) | (_| | | | | (_| | | | | (_| | |____/ \__,_|_| |_|\__,_|_| |_|\__,_| Last login: Sun Feb 14 20:26:07 2016 from 192.168.0.100 Load: 0.57, 0.20, 0.07 - Board: 38.9°C - Memory: 966Mb root@bananapi:~# blkid /dev/mmcblk0: PTUUID="000380a6" PTTYPE="dos" /dev/mmcblk0p1: UUID="b5d952cd-46ba-4d79-b669-ba961ec9559f" TYPE="ext4" PARTUUID="000380a6-01" root@bananapi:~# That broke SATA!!

Okay, am just tidying some other things up. Will get onto that later. I will be away until wednesday so will get what i can done tonight.

Can I help with that?

SWAP UPDATE I have tried 5.00 with both of my boards and can confirm neither of them detect the SATA drive. So its definitely Banana Pro boards that don't work. 3 counts so far.

I Will swap it out but am running bananananian at the moment and its working fine. Eating food now. BBS with swap out results.

Another option is i post my board to you tomorrow and you should get it within a few days? I have 2. One is in use as a NAS/PLEX/VIRTUALMIN - works superbly with armbian! The other is a developemnt/test board (how i spotted the problem with the upgrade to 5.00) This board would not be missed as my NAS is working fine atm.

I can give you access to the board by ssh root if like. I trust you. Would this help? I will donate £40 (what it would cost me) anyways. I will do that later today.

How about I donate the cost of a pro to you?

Is that a banana pi or pro Igor? I would be happy to donate a pro if this helps. Thanks Gary

This also failed. I am not sure what this means at this point. Over to you guys. Thanks Gary

I'll try this one now.

Crikey I dont get this support for paid products! OK installed the old kernel from zador and the drive still does not show up.

I tried this one first and still no drive. I will try zador's now!

root@bananapi:~# cat /proc/interrupts CPU0 CPU1 17: 0 0 GIC 29 Edge arch_timer 18: 20068 8523 GIC 30 Edge arch_timer 21: 0 0 GIC 54 Level sun4i_timer0 22: 0 0 GIC 113 Level sun5i_timer0 25: 0 0 GIC 59 Level 1c02000.dma-controller 26: 0 0 GIC 42 Level sun4i-spi 27: 60467 0 GIC 64 Level sunxi-mmc 28: 3973 0 GIC 67 Level sunxi-mmc 30: 0 0 GIC 71 Level ehci_hcd:usb1 31: 0 0 GIC 96 Level ohci_hcd:usb3 34: 0 0 GIC 72 Level ehci_hcd:usb2 35: 0 0 GIC 97 Level ohci_hcd:usb4 38: 1 0 GIC 56 Level 1c20d00.rtc 44: 1085 0 GIC 61 Level sun4i-ts 45: 6 0 GIC 33 Level serial 48: 866 0 GIC 39 Level mv64xxx_i2c 49: 0 0 GIC 41 Level mv64xxx_i2c 50: 11 2092 GIC 117 Level eth0 59: 1 0 sunxi_pio_edge 4 Edge usb0-id-det 65: 0 0 sunxi_pio_edge 10 Edge 1c0f000.mmc cd 87: 0 0 sunxi-nmi 0 Level axp20x_irq_chip 93: 0 0 axp20x_irq_chip 5 Edge axp20x-usb-power-supply 94: 0 0 axp20x_irq_chip 6 Edge axp20x-usb-power-supply 114: 0 0 axp20x_irq_chip 26 Edge axp20x-usb-power-supply 115: 0 0 axp20x_irq_chip 27 Edge axp20x-usb-power-supply 121: 0 0 axp20x_irq_chip 33 Edge axp20x-pek-dbr 122: 0 0 axp20x_irq_chip 34 Edge axp20x-pek-dbf IPI0: 0 0 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 4678 37545 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 5 5 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 IRQ work interrupts IPI7: 0 0 completion interrupts Err: 0 root@bananapi:~#

Thanks Igor but the drive still has not shown up.

I was worried this might be the case. Quite alarming this update. I hope i dont have to change distros as armbian rocks.

That was the first place i looked my friend.

How can i do a nand-sata-install on 4.5? all of those need updating before i can use the command as far as i know. Gary