Hello,
I want to use for my domotic a USB Everspring sa413 (Z-Wave modem based on ZM5304), but this device is not detected on Armbian with my Orange Pi Zero h2+.
https://fccid.io/D87-ZM5304-U/User-Manual/User-Manual-pdf-2052478
Normally, I think this dongle is use like CDC/ACM device but I don't understand what wrong because ACM module is loaded.
I use actually Debian Jessie next 4.13016.
root@orangepizero:~# lsusb -t
/: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M
No ttyAMA0 on my dev
root@orangepizero:~# lsmod
Module Size Used by
sun8i_codec_analog 24576 0
xradio_wlan 94208 1
snd_soc_core 118784 1 sun8i_codec_analog
snd_pcm_dmaengine 16384 1 snd_soc_core
mac80211 450560 1 xradio_wlan
snd_pcm 69632 2 snd_pcm_dmaengine,snd_soc_core
snd_timer 24576 1 snd_pcm
snd 45056 3 snd_timer,snd_soc_core,snd_pcm
cfg80211 376832 2 mac80211,xradio_wlan
soundcore 16384 1 snd
sun4i_gpadc_iio 16384 0
rfkill 20480 2 cfg80211
uio_pdrv_genirq 16384 0
uio 16384 1 uio_pdrv_genirq
usb_f_acm 16384 1
u_serial 20480 3 usb_f_acm
g_serial 16384 0
libcomposite 40960 2 g_serial,usb_f_acm
fuse 73728 1
pwrseq_simple 16384 1
dmseg : https://ufile.io/0u7n8
(Nothing happen)
When I plug a usb storage, all work, so no problem from hardware.
root@orangepizero:~# lsusb -t
.....
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 480M
.....
Test from other Linux (no ARMBIAN ), this USB device is detected :
Thank a lot for your help.
OPI_Deb_next_dmesg