Jota79

Thanks for photo! Mine is missing too.... I do not understand this Xunlong decission...

Please... Could someone to take a photo of BSN20 MOSFET in te PCB? I would like to check my Orange Pi Zero Plus 2. Thanks in advance

At last the guilty was not my weak charger/psu, the issue was at client side. My PC, my samba client, connects to 2.4Ghz wifi sometimes and connects to 5Ghz wifi anothertimes. 2.4Ghz -> poor network throughput, 5Ghz -> good network throughput. It was not a kernel problem, nor power/hardware issue. It is my fault, sorry for confusion.

It is probabily for my weak charger/psu. I only need 0.5a but my weak charger/psu only get 4.88v at 0.45a. With an estimated vdroop of 0.2-0.3 with my usb cable ( 1 meter, not AWG20... ) my orange pi probabily get 4.6v. I am not very sure, I am going testing that some days.

Another time poor network throughput with last kernel ( 5.37.180117 - 4.14.18-sunxi64 ). Is it possible to select another kernel ? At last It was an issue in my PC, at samba client side. My PC connects to 2.4Ghz instead of 5Ghz one Thanks in advance

uooohhhh!!!!! What a tiny "big" CPD!!!!! ;-) Thank you very much, guidol. It is a very good reference for me. Now, I have moved my orange pi zero plus H5 to a very open-space ( it was inside a very closed furniture before.... ). I have moved it behind my plasma TV ;-). And now, almost idle, temperature is in normal values ( with 21C room temperature ): root@zeus:~# armbianmonitor -m Stop monitoring using [ctrl]-[c] Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 22:02:28: 816MHz 0.36 10% 1% 1% 3% 3% 0% 47.2°C 0/2 22:02:33: 816MHz

Guidol... Do you have any active cooling? Your temperatures are very low...

It is very strange..... I have lost symbolyc link to /sys/devices/virtual/thermal/thermal_zone0/temp: root@zeus:~# armbianmonitor -m Stop monitoring using [ctrl]-[c] Time CPU load %cpu %sys %usr %nice %io %irq C.St. 20:47:06: 816MHz 0.33 14% 1% 5% 2% 3% 0% 0/2^C root@zeus:~# ls -la /etc/armbianmonitor/datasources/soctemp ls: cannot access '/etc/armbianmonitor/datasources/soctemp': No such file or directory I have to create it manually and voila! : root@zeus:~# ln -s /sys/devices/virtual/thermal/thermal_zon

Showing Temperature is missing in last two kernels: root@zeus:/sys/class/thermal/thermal_zone0# uname -a Linux zeus 4.14.13-sunxi64 #35 SMP Tue Jan 16 17:51:14 CET 2018 aarch64 GNU/Linux root@zeus:/sys/class/thermal/thermal_zone0# armbianmonitor -m Stop monitoring using [ctrl]-[c] Time CPU load %cpu %sys %usr %nice %io %irq C.St. 20:50:25: 816MHz 1.82 22% 3% 3% 4% 10% 0% 0/2 20:50:30: 816MHz 1.83 16% 3% 1% 6% 5% 0% 0/2 Although, you can see it manually: root@zeus:~# cat /sys/class/thermal/thermal_zone0/tem

Hello again, New kernel, new news. I am getting very good network throughput again with last kernel 4.14.10-sunxi64. I am getting 30MB/s transfer speed with my config, via samba with an USB 2.0 HDDD as bottleneck. Great!!

hello, Trying last kernel, 4.14.8-sunxi64, I am getting a very poor network throughput, only 3.98MB/s via samba.... Before that, I got 30MB/s ( via samba with my USB 2.0 HDD as bottleneck ). Furtheremore, I see a max CPU Freq at 812Mhz ( before 1Ghz ) and very high temperatures at idle... Perhaps CPU Freq Scaling is not fully implemented. I am very excited with this little board and I am sure I am going to see some improvements soon. I had been using an Orange pi One with armbian for one year very happy. This board, Orange Pi Zero Plus, is my gigabit upgrade as NAS. Great distro ar