Coolzero1982
-
Posts
39 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Coolzero1982
-
-
What i now see is, it Display after start still "Buster" and not "Bullseys" and must the kernel version not be 6.1.x?
Welcome to Armbian 21.08.6 Buster with Linux 5.15.93-sunxi -
It seems to be fine after the updates, but a few updates won't to be installed, Why?
apt full-upgrade Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Paketaktualisierung (Upgrade) wird berechnet… Fertig Die folgenden Pakete sind zurückgehalten worden: armbian-bsp-cli-cubietruck armbian-firmware-full linux-dtb-current-sunxi linux-headers-current-sunxi linux-image-current-sunxi linux-u-boot-cubietruck-current 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 6 nicht aktualisiert. -
Danke für den Tip, da gab es noch einen Eintrag, denke jetzt sieht es besser aus
apt update OK:1 http://deb.debian.org/debian bullseye InRelease OK:2 http://security.debian.org/debian-security bullseye-security InRelease OK:3 http://deb.debian.org/debian bullseye-updates InRelease OK:4 http://deb.debian.org/debian bullseye-backports InRelease Holen:5 http://armbian.hosthatch.com/apt bullseye InRelease [53,3 kB] Holen:6 http://armbian.hosthatch.com/apt bullseye/main all Packages [94,2 kB] Holen:7 http://armbian.hosthatch.com/apt bullseye/main armhf Packages [545 kB] Holen:8 http://armbian.hosthatch.com/apt bullseye/main armhf Contents (deb) [30, 9 MB] Holen:9 http://armbian.hosthatch.com/apt bullseye/main all Contents (deb) [54,0 kB] Holen:10 http://armbian.hosthatch.com/apt bullseye/bullseye-utils armhf Packages [47,7 kB] Holen:11 http://armbian.hosthatch.com/apt bullseye/bullseye-utils all Packages [30,4 kB] Holen:12 http://armbian.hosthatch.com/apt bullseye/bullseye-utils armhf Contents (deb) [32,7 kB] Holen:13 http://armbian.hosthatch.com/apt bullseye/bullseye-utils all Contents (deb) [27,9 kB] Holen:14 http://armbian.hosthatch.com/apt bullseye/bullseye-desktop armhf Packages [22,0 kB] Holen:15 http://armbian.hosthatch.com/apt bullseye/bullseye-desktop all Packages [18,2 kB] Holen:16 http://armbian.hosthatch.com/apt bullseye/bullseye-desktop armhf Contents (deb) [249 kB] Holen:17 http://armbian.hosthatch.com/apt bullseye/bullseye-desktop all Contents (deb) [242 kB] -
Hello, sorry i came the last days not to that.
I now have restarted the Cubie and then a apt update shows me this.
apt update OK:1 http://security.debian.org/debian-security bullseye-security InRelease OK:2 http://deb.debian.org/debian bullseye InRelease OK:3 http://deb.debian.org/debian bullseye-updates InRelease OK:4 http://deb.debian.org/debian bullseye-backports InRelease OK:5 http://mirrors.xtom.de/armbian buster InRelease Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Aktualisierung für 752 Pakete verfügbar. Führen Sie »apt list --upgradable« aus, um sie anzuzeigen.I don't know why it shows me this
OK:5 http://armbian.hosthatch.com/apt buster InReleasethe sources.list have this entries, but not the number 5...
deb http://deb.debian.org/debian bullseye main contrib non-free deb http://security.debian.org/debian-security bullseye-security main contrib non-free deb http://deb.debian.org/debian bullseye-updates main contrib non-free deb http://deb.debian.org/debian bullseye-backports main #deb http://httpredir.debian.org/debian bullseye main contrib non-free #deb http://httpredir.debian.org/debian buster main contrib non-free #deb-src http://httpredir.debian.org/debian buster main contrib non-free #deb http://httpredir.debian.org/debian bullseys-updates main contrib non-free #deb http://httpredir.debian.org/debian buster-updates main contrib non-free #deb-src http://httpredir.debian.org/debian buster-updates main contrib non-free #deb http://deb.debian.org/debian bullseys-backports main contrib non-free #deb http://httpredir.debian.org/debian buster-backports main contrib non-free #deb-src http://httpredir.debian.org/debian buster-backports main contrib non-free #deb http://security.debian.org/ bullseys/updates main contrib non-free #deb http://security.debian.org/ buster/updates main contrib non-free #deb-src http://security.debian.org/ buster/updates main contrib non-free #deb Fhem Paket -
Ok,
my new
Zitat/etc/apt/sources.list
is
deb http://deb.debian.org/debian bullseye main contrib deb http://deb.debian.org/debian bullseye main contib non-free deb http://security.debian.org/debian-security bullseye-security main contrib non-free deb http://deb.debian.org/debian bullseye-updates main contrib non-free deb http://deb.debian.org/debian bullseye-backports mainis this OK?
apt update shows then this
apt update OK:1 http://security.debian.org/debian-security bullseye-security InRelease OK:2 http://deb.debian.org/debian bullseye InRelease OK:3 http://deb.debian.org/debian bullseye-updates InRelease OK:4 http://deb.debian.org/debian bullseye-backports InRelease OK:5 http://fi.mirror.armbian.de/apt buster InRelease Paketlisten werden gelesen... Fertig Abhängigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Aktualisierung für 752 Pakete verfügbar. Führen Sie »apt list --upgradable« aus, um sie anzuzeigen. W: Ziel Packages (main/binary-armhf/Packages) ist mehrfach konfiguriert in /etc/apt/sources.list:1 und /etc/apt/sources.list:3 W: Ziel Packages (main/binary-all/Packages) ist mehrfach konfiguriert in /etc/apt/sources.list:1 und /etc/apt/sources.list:3 W: Ziel Contents-deb (main/Contents-armhf) ist mehrfach konfiguriert in /etc/apt/sources.list:1 und /etc/apt/sources.list:3 W: Ziel Contents-deb (main/Contents-all) ist mehrfach konfiguriert in /etc/apt/sources.list:1 und /etc/apt/sources.list:3 W: Das Laden der konfigurierten Datei »contib/binary-armhf/Packages« wird übersprungen, da das Depot »http://deb.debian.org/debian bullseye InRelease« die Komponente »contib« nicht enthält. (Schreibfehler bei der Angabe der Komponente in sources.list?) W: Das Laden der konfigurierten Datei »contib/Contents-all« wird übersprungen, da das Depot »http://deb.debian.org/debian bullseye InRelease« die Komponente »contib« nicht enthält. (Schreibfehler bei der Angabe der Komponente in sources.list?) W: Das Laden der konfigurierten Datei »contib/Contents-armhf« wird übersprungen, da das Depot »http://deb.debian.org/debian bullseye InRelease« die Komponente »contib« nicht enthält. (Schreibfehler bei der Angabe der Komponente in sources.list?) W: Ziel Packages (main/binary-armhf/Packages) ist mehrfach konfiguriert in /etc/apt/sources.list:1 und /etc/apt/sources.list:3 W: Ziel Packages (main/binary-all/Packages) ist mehrfach konfiguriert in /etc/apt/sources.list:1 und /etc/apt/sources.list:3 W: Ziel Contents-deb (main/Contents-armhf) ist mehrfach konfiguriert in /etc/apt/sources.list:1 und /etc/apt/sources.list:3 W: Ziel Contents-deb (main/Contents-all) ist mehrfach konfiguriert in /etc/apt/sources.list:1 und /etc/apt/sources.list:3 -
Hi, thank you for the link, my
Zitat/etc/apt/sources.list
looks this
deb http://deb.debian.org/debian bullseye main contrib deb http://httpredir.debian.org/debian bullseye main contrib non-free #deb http://httpredir.debian.org/debian buster main contrib non-free #deb-src http://httpredir.debian.org/debian buster main contrib non-free deb http://httpredir.debian.org/debian bullseys-updates main contrib non-free #deb http://httpredir.debian.org/debian buster-updates main contrib non-free #deb-src http://httpredir.debian.org/debian buster-updates main contrib non-free deb http://httpredir.debian.org/debian bullseys-backports main contrib non-free #deb http://httpredir.debian.org/debian buster-backports main contrib non-free #deb-src http://httpredir.debian.org/debian buster-backports main contrib non-free deb http://security.debian.org/ bullseys/updates main contrib non-free #deb http://security.debian.org/ buster/updates main contrib non-free #deb-src http://security.debian.org/ buster/updates main contrib non-free #deb Fhem Paketwhen i make a
Zitatapt update
it shows me this
apt update Holen:1 http://httpredir.debian.org/debian bullseye InRelease [116 kB] Ign:2 http://security.debian.org bullseys/updates InRelease Holen:3 http://deb.debian.org/debian bullseye InRelease [116 kB] Fehl:4 http://security.debian.org bullseys/updates Release 404 Not Found [IP: 2a04:4e42:8d::644 80] Ign:5 http://httpredir.debian.org/debian bullseys-updates InRelease Ign:6 http://httpredir.debian.org/debian bullseys-backports InRelease Fehl:8 http://httpredir.debian.org/debian bullseys-updates Release 404 Not Found [IP: 2a04:4e42:8d::644 80] Fehl:9 http://httpredir.debian.org/debian bullseys-backports Release 404 Not Found [IP: 2a04:4e42:8d::644 80] OK:7 http://fi.mirror.armbian.de/apt buster InRelease Holen:10 http://httpredir.debian.org/debian bullseye/main armhf Packages [10,8 MB] Holen:11 http://deb.debian.org/debian bullseye/main armhf Packages [10,8 MB] Holen:12 http://httpredir.debian.org/debian bullseye/main all Contents (deb) [31,1 MB] Holen:13 http://deb.debian.org/debian bullseye/main all Contents (deb) [31,1 MB] Holen:14 http://httpredir.debian.org/debian bullseye/main armhf Contents (deb) [9.303 kB] Holen:15 http://deb.debian.org/debian bullseye/main armhf Contents (deb) [9.303 kB] Holen:16 http://httpredir.debian.org/debian bullseye/contrib armhf Packages [47,8 kB] Holen:17 http://httpredir.debian.org/debian bullseye/contrib all Contents (deb) [57,3 kB] Holen:18 http://httpredir.debian.org/debian bullseye/contrib armhf Contents (deb) [29,2 kB] Holen:19 http://httpredir.debian.org/debian bullseye/non-free armhf Packages [67,3 kB] Holen:20 http://httpredir.debian.org/debian bullseye/non-free armhf Contents (deb) [13,5 kB] Holen:21 http://httpredir.debian.org/debian bullseye/non-free all Contents (deb) [888 kB] Holen:22 http://deb.debian.org/debian bullseye/contrib armhf Packages [47,8 kB] Holen:23 http://deb.debian.org/debian bullseye/contrib armhf Contents (deb) [29,2 kB] Holen:24 http://deb.debian.org/debian bullseye/contrib all Contents (deb) [57,3 kB] OK:1 http://deb.debian.org/debian bullseye InRelease OK:2 http://httpredir.debian.org/debian bullseye InRelease Ign:3 http://security.debian.org bullseys/updates InRelease Fehl:4 http://security.debian.org bullseys/updates Release 404 Not Found [IP: 2a04:4e42:8d::644 80] Ign:6 http://httpredir.debian.org/debian bullseys-updates InRelease Ign:7 http://httpredir.debian.org/debian bullseys-backports InRelease Fehl:8 http://httpredir.debian.org/debian bullseys-updates Release 404 Not Found [IP: 2a04:4e42:8d::644 80] Fehl:9 http://httpredir.debian.org/debian bullseys-backports Release 404 Not Found [IP: 2a04:4e42:8d::644 80] OK:5 http://mirrors.xtom.de/armbian buster InReleasewhat can i do because this
Zitat404 Not found
and this?
ZitatOK:5 http://mirrors.xtom.de/armbian buster InRelease
Thank you for your help
-
Hello,
how can i update my Cubitruck with armbian Buster to Bookworm?
apt dist-upgrade did it not.
Thank you
-
The Support of the comunity too?
-
vor 15 Stunden schrieb Werner:
Your issue report is not a valid bug report per the Armbian bug reporting instructions (https://www.armbian.com/bugs). With limited resources the Armbian project is only able to spend time on issues where all the requested information has been provided and for only the boards/images/software that are supported. Your report is invalid for one or more of the following reasons (non-exhaustive list):
I'm not sure if is a error or a layer 8 problem.....
when you say its a erorr i will make a bug report
-
vor 22 Stunden schrieb gounthar:
You could maybe just add a newline, or download https://deb.nodesource.com/setup_14.x then add -x on the first line... or change your command line like that:
curl -sL https://deb.nodesource.com/setup_14.x | sudo -E bash -xThis set of commands does work for me.
When i do this, i become this message:
curl -sL https://deb.nodesource.com/setup_14.x | sudo -E bas h -x + export DEBIAN_FRONTEND=noninteractive + DEBIAN_FRONTEND=noninteractive + SCRSUFFIX=_14.x + NODENAME='Node.js 14.x' + NODEREPO=node_14.x + NODEPKG=nodejs + test -t 1 ++ which tput ++ tput colors + ncolors=8 + test -n 8 + test 8 -ge 8 ++ tput cols + termcols=80 ++ tput bold + bold='' ++ tput smul + underline='' ++ tput smso + standout='' ++ tput sgr0 + normal='' ++ tput setaf 0 + black='' ++ tput setaf 1 + red='' ++ tput setaf 2 + green='' ++ tput setaf 3 + yellow='' ++ tput setaf 4 + blue='' ++ tput setaf 5 + magenta='' ++ tput setaf 6 + cyan='' ++ tput setaf 7 + white='' + setup + script_deprecation_warning + '[' X_14.x == X ']' + node_deprecation_warning + [[ XNode.js 14.x == \X\i\o\.\j\s\ \1\.\x ]] + [[ XNode.js 14.x == \X\i\o\.\j\s\ \2\.\x ]] + [[ XNode.js 14.x == \X\i\o\.\j\s\ \3\.\x ]] + [[ XNode.js 14.x == \X\N\o\d\e\.\j\s\ \0\.\1\0 ]] + [[ XNode.js 14.x == \X\N\o\d\e\.\j\s\ \0\.\1\2 ]] + [[ XNode.js 14.x == \X\N\o\d\e\.\j\s\ \4\.\x\ \L\T\S\ \A\r\g\o\n ]] + [[ XNode.js 14.x == \X\N\o\d\e\.\j\s\ \5\.\x ]] + [[ XNode.js 14.x == \X\N\o\d\e\.\j\s\ \6\.\x\ \L\T\S\ \B\o\r\o\n ]] + [[ XNode.js 14.x == \X\N\o\d\e\.\j\s\ \7\.\x ]] + [[ XNode.js 14.x == \X\N\o\d\e\.\j\s\ \8\.\x\ \L\T\S\ \C\a\r\b\o\n ]] + [[ XNode.js 14.x == \X\N\o\d\e\.\j\s\ \9\.\x ]] + [[ XNode.js 14.x == \X\N\o\d\e\.\j\s\ \1\0\.\x ]] + [[ XNode.js 14.x == \X\N\o\d\e\.\j\s\ \1\1\.\x ]] + [[ XNode.js 14.x == \X\N\o\d\e\.\j\s\ \1\3\.\x ]] + print_status 'Installing the NodeSource Node.js 14.x repo...' + echo + echo '## Installing the NodeSource Node.js 14.x repo...' ## Installing the NodeSource Node.js 14.x repo... + echo ++ uname -m ++ grep -Eq '^armv6' + PRE_INSTALL_PKGS= + '[' '!' -e /usr/lib/apt/methods/https ']' + '[' '!' -x /usr/bin/lsb_release ']' + PRE_INSTALL_PKGS=' lsb-release' + '[' '!' -x /usr/bin/curl ']' + '[' '!' -x /usr/bin/gpg ']' + print_status 'Populating apt-get cache...' + echo + echo '## Populating apt-get cache...' ## Populating apt-get cache... + echo + exec_cmd 'apt-get update' + exec_cmd_nobail 'apt-get update' + echo '+ apt-get update' + apt-get update + bash -c 'apt-get update' Holen:1 http://security.debian.org buster/updates InRelease [65,4 kB] OK:3 http://httpredir.debian.org/debian buster InRelease Holen:4 http://httpredir.debian.org/debian buster-updates InRelease [51,9 kB] Holen:5 http://httpredir.debian.org/debian buster-backports InRelease [46,7 kB] Holen:2 https://mirrors.netix.net/armbian/apt buster InRelease [18,4 kB] Holen:6 http://security.debian.org buster/updates/main armhf Packages [351 kB] Holen:7 http://httpredir.debian.org/debian buster-backports/main armhf Packages.diff/Index [27,8 kB] Holen:8 http://httpredir.debian.org/debian buster-backports/main armhf Packages 2021-05-11-1400.52.pdiff [677 B] Holen:8 http://httpredir.debian.org/debian buster-backports/main armhf Packages 2021-05-11-1400.52.pdiff [677 B] Holen:9 https://mirrors.netix.net/armbian/apt buster/main armhf Packages [867 kB] Holen:10 https://mirrors.netix.net/armbian/apt buster/main armhf Contents (deb) [24,4 MB] Holen:11 https://mirrors.netix.net/armbian/apt buster/buster-utils armhf Packages [73,9 kB] Holen:12 https://mirrors.netix.net/armbian/apt buster/buster-utils armhf Contents (deb) [12,8 kB] Holen:13 https://mirrors.netix.net/armbian/apt buster/buster-desktop armhf Packages [28,4 kB] Es wurden 25,9 MB in 3 min 7 s geholt (139 kB/s). Paketlisten werden gelesen... Fertig + '[' 'X lsb-release' '!=' X ']' + print_status 'Installing packages required for setup: lsb-release...' + echo + echo '## Installing packages required for setup: lsb-release...' ## Installing packages required for setup: lsb-release... + echo + exec_cmd 'apt-get install -y lsb-release > /dev/null 2>&1' + exec_cmd_nobail 'apt-get install -y lsb-release > /dev/null 2>&1' + echo '+ apt-get install -y lsb-release > /dev/null 2>&1' + apt-get install -y lsb-release > /dev/null 2>&1 + bash -c 'apt-get install -y lsb-release > /dev/null 2>&1' ++ lsb_release -d ++ grep 'Ubuntu .*development' main: Zeile 206: lsb_release: Kommando nicht gefunden. ++ echo 1 + IS_PRERELEASE=1 + [[ 1 -eq 0 ]] ++ lsb_release -c -s main: Zeile 212: lsb_release: Kommando nicht gefunden. + DISTRO= + check_alt SolydXK solydxk-9 Debian stretch + '[' X == Xsolydxk-9 ']' + check_alt Kali sana Debian jessie + '[' X == Xsana ']' + check_alt Kali kali-rolling Debian bullseye + '[' X == Xkali-rolling ']' + check_alt 'Sparky Linux' Tyche Debian stretch + '[' X == XTyche ']' + check_alt 'Sparky Linux' Nibiru Debian buster + '[' X == XNibiru ']' + check_alt 'MX Linux 17' Horizon Debian stretch + '[' X == XHorizon ']' + check_alt 'MX Linux 18' Continuum Debian stretch + '[' X == XContinuum ']' + check_alt 'MX Linux 19' 'patito feo' Debian buster + '[' X == 'Xpatito feo' ']' + check_alt 'Linux Mint' maya Ubuntu precise + '[' X == Xmaya ']' + check_alt 'Linux Mint' qiana Ubuntu trusty + '[' X == Xqiana ']' + check_alt 'Linux Mint' rafaela Ubuntu trusty + '[' X == Xrafaela ']' + check_alt 'Linux Mint' rebecca Ubuntu trusty + '[' X == Xrebecca ']' + check_alt 'Linux Mint' rosa Ubuntu trusty + '[' X == Xrosa ']' + check_alt 'Linux Mint' sarah Ubuntu xenial + '[' X == Xsarah ']' + check_alt 'Linux Mint' serena Ubuntu xenial + '[' X == Xserena ']' + check_alt 'Linux Mint' sonya Ubuntu xenial + '[' X == Xsonya ']' + check_alt 'Linux Mint' sylvia Ubuntu xenial + '[' X == Xsylvia ']' + check_alt 'Linux Mint' tara Ubuntu bionic + '[' X == Xtara ']' + check_alt 'Linux Mint' tessa Ubuntu bionic + '[' X == Xtessa ']' + check_alt 'Linux Mint' tina Ubuntu bionic + '[' X == Xtina ']' + check_alt 'Linux Mint' tricia Ubuntu bionic + '[' X == Xtricia ']' + check_alt 'Linux Mint' ulyana Ubuntu focal + '[' X == Xulyana ']' + check_alt 'Linux Mint' ulyssa Ubuntu focal + '[' X == Xulyssa ']' + check_alt LMDE betsy Debian jessie + '[' X == Xbetsy ']' + check_alt LMDE cindy Debian stretch + '[' X == Xcindy ']' + check_alt LMDE debbie Debian buster + '[' X == Xdebbie ']' + check_alt elementaryOS luna Ubuntu precise + '[' X == Xluna ']' + check_alt elementaryOS freya Ubuntu trusty + '[' X == Xfreya ']' + check_alt elementaryOS loki Ubuntu xenial + '[' X == Xloki ']' + check_alt elementaryOS juno Ubuntu bionic + '[' X == Xjuno ']' + check_alt elementaryOS hera Ubuntu bionic + '[' X == Xhera ']' + check_alt elementaryOS odin Ubuntu focal + '[' X == Xodin ']' + check_alt Trisquel toutatis Ubuntu precise + '[' X == Xtoutatis ']' + check_alt Trisquel belenos Ubuntu trusty + '[' X == Xbelenos ']' + check_alt Trisquel flidas Ubuntu xenial + '[' X == Xflidas ']' + check_alt Trisquel etiona Ubuntu bionic + '[' X == Xetiona ']' + check_alt 'Uruk GNU/Linux' lugalbanda Ubuntu xenial + '[' X == Xlugalbanda ']' + check_alt BOSS anokha Debian wheezy + '[' X == Xanokha ']' + check_alt BOSS anoop Debian jessie + '[' X == Xanoop ']' + check_alt BOSS drishti Debian stretch + '[' X == Xdrishti ']' + check_alt BOSS unnati Debian buster + '[' X == Xunnati ']' + check_alt bunsenlabs bunsen-hydrogen Debian jessie + '[' X == Xbunsen-hydrogen ']' + check_alt bunsenlabs helium Debian stretch + '[' X == Xhelium ']' + check_alt bunsenlabs lithium Debian buster + '[' X == Xlithium ']' + check_alt Tanglu chromodoris Debian jessie + '[' X == Xchromodoris ']' + check_alt PureOS green Debian sid + '[' X == Xgreen ']' + check_alt PureOS amber Debian buster + '[' X == Xamber ']' + check_alt Devuan jessie Debian jessie + '[' X == Xjessie ']' + check_alt Devuan ascii Debian stretch + '[' X == Xascii ']' + check_alt Devuan beowulf Debian buster + '[' X == Xbeowulf ']' + check_alt Devuan ceres Debian sid + '[' X == Xceres ']' + check_alt Deepin panda Debian sid + '[' X == Xpanda ']' + check_alt Deepin unstable Debian sid + '[' X == Xunstable ']' + check_alt Deepin stable Debian buster + '[' X == Xstable ']' + check_alt Pardus onyedi Debian stretch + '[' X == Xonyedi ']' + check_alt 'Liquid Lemur' lemur-3 Debian stretch + '[' X == Xlemur-3 ']' + check_alt 'Astra Linux' orel Debian stretch + '[' X == Xorel ']' + check_alt Ubilinux dolcetto Debian stretch + '[' X == Xdolcetto ']' + '[' X == Xdebian ']' + print_status 'Confirming "" is supported...' + echo + echo '## Confirming "" is supported...' ## Confirming "" is supported... + echo + '[' -x /usr/bin/curl ']' + exec_cmd_nobail 'curl -sLf -o /dev/null '\''https://deb.nodesource.com/node_14.x/dists//Release'\''' + echo '+ curl -sLf -o /dev/null '\''https://deb.nodesource.com/node_14.x/dists//Release'\''' + curl -sLf -o /dev/null 'https://deb.nodesource.com/node_14.x/dists//Release' + bash -c 'curl -sLf -o /dev/null '\''https://deb.nodesource.com/node_14.x/dists//Release'\''' + RC=22 + [[ 22 != 0 ]] + print_status 'Your distribution, identified as "", is not currently supported, please contact NodeSource at https://github.com/nodesource/distributions/issues if you think this is incorrect or would like your distribution to be considered for support' + echo + echo '## Your distribution, identified as "", is not currently supported, please contact NodeSource at https://github.com/nodesource/distributions/issues if you think this is incorrect or would like your distribution to be considered for support' ## Your distribution, identified as "", is not currently supported, please contact NodeSource at https://github.com/nodesource/distributions/issues if you think this is incorrect or would like your distribution to be considered for support + echo + exit 1 -
Hello,
i have to update nodejs to version 14, but wenn i do
curl -sL https://deb.nodesource.com/setup_14.x | sudo -E bash -sudo apt-get install -y nodejsi become this error
bash: -d: Ungültige Option Aufruf: bash [Lange GNU Option] [Option] ... bash [Lange GNU Option] [Option] Script-Datei ... Lange GNU Optionen: --debug --debugger --dump-po-strings --dump-strings --help --init-file --login --noediting --noprofile --norc --posix --pretty-print --rcfile --restricted --verbose --version Shell-Optionen: -ilrsD oder -c Kommando oder -O shopt_option (Nur Aufruf) -abefhkmnptuvxBCHP oder Option -oWhat can i do?
Thank you
-
vor 16 Stunden schrieb lampra:
I had the same issue but went away after upgrade to 20.11
Welcome to Armbian 20.11 Buster with Linux 5.8.16-sunxi Linux cubietruck 5.8.16-sunxi #20.08.14 SMP Tue Oct 20 22:15:32 CEST 2020 armv7l System load: 7% Up time: 5 days 23:38I have do the update and now it seems fine
-
Hi,
here the output
df -h Dateisystem Größe Benutzt Verf. Verw% Eingehängt auf udev 952M 0 952M 0% /dev tmpfs 201M 3,1M 198M 2% /run /dev/mmcblk0p1 7,2G 3,3G 3,8G 47% / tmpfs 1005M 0 1005M 0% /dev/shm tmpfs 5,0M 4,0K 5,0M 1% /run/lock tmpfs 1005M 0 1005M 0% /sys/fs/cgroup tmpfs 1005M 1,0M 1004M 1% /tmp /dev/sda1 110G 398M 104G 1% /media/Platte /dev/zram0 49M 1,6M 44M 4% /var/log tmpfs 201M 0 201M 0% /run/user/0 -
I don't know why, but the Cubie runs now 15 Days without any problem.....
But the load is not good, but i don't know why
____ _ _ _ _ / ___| _| |__ (_) ___| |_ _ __ _ _ ___| | __ | | | | | | '_ \| |/ _ \ __| '__| | | |/ __| |/ / | |__| |_| | |_) | | __/ |_| | | |_| | (__| < \____\__,_|_.__/|_|\___|\__|_| \__,_|\___|_|\_\ Welcome to Armbian 20.08.17 Buster with Linux 5.8.16-sunxi System load: 376% Up time: 15 days 23:39 Memory usage: 13% of 1.96G IP: 192.168.188.47 CPU temp: 43°C Usage of /: 47% of 7.2G storage/: 1% of 110G [ General system configuration (beta): armbian-config ] Last login: Wed Dec 2 19:25:18 2020 from 192.168.188.52dmesg liefert ein paar rote eintröge
[ 11.147981] Bluetooth: hci0: BCM: features 0x07 [ 11.171842] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-1 1), device may have limited channels available [ 11.172345] Bluetooth: hci0: BCM20702A [ 11.172360] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 11.176844] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d [ 11.186421] usb 3-1: New USB device found, idVendor=0403, idProduct=6001, bcd Device= 6.00 [ 11.186453] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 11.186472] usb 3-1: Product: FT232R USB UART [ 11.186479] usb 3-1: Manufacturer: FTDI [ 11.186494] usb 3-1: SerialNumber: A7031FBC [ 11.244304] usb 2-1.2: new full-speed USB device number 3 using ehci-platform [ 11.303763] Bluetooth: hci0: BCM: firmware Patch file not found, tried: [ 11.303774] Bluetooth: hci0: BCM: 'brcm/BCM20702A1.hcd' [ 11.303778] Bluetooth: hci0: BCM: 'brcm/BCM.hcd' [ 11.393206] usbcore: registered new interface driver usbserial_generic [ 11.393288] usbserial: USB Serial support registered for generic [ 11.446026] usbcore: registered new interface driver ftdi_sio [ 11.446100] usbserial: USB Serial support registered for FTDI USB Serial Devi ce [ 11.446465] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected [ 11.446705] usb 3-1: Detected FT232RL [ 11.454182] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 11.474645] usb 2-1.2: New USB device found, idVendor=03eb, idProduct=204b, b cdDevice= 0.00 [ 11.474660] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber =0 [ 11.474667] usb 2-1.2: Product: CUL433
[ 21.103211] systemd[1]: Started Armbian memory supported logging. [ 21.116526] systemd[1]: Starting Journal Service... [ 21.547262] systemd[1]: Started Journal Service. [ 21.663334] systemd-journald[525]: Received request to flush runtime journal from PID 1 [ 22.413392] random: crng init done [ 22.413409] random: 7 urandom warning(s) missed due to ratelimiting [ 28.650370] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8 211E Gigabit Ethernet] (irq=POLL) [ 28.658233] sun7i-dwmac 1c50000.ethernet eth0: No Safety Features support fou nd [ 28.658252] sun7i-dwmac 1c50000.ethernet eth0: RX IPC Checksum Offload disabl ed [ 28.658265] sun7i-dwmac 1c50000.ethernet eth0: No MAC Management Counters ava ilable [ 28.658275] sun7i-dwmac 1c50000.ethernet eth0: PTP not supported by HW [ 28.658293] sun7i-dwmac 1c50000.ethernet eth0: configuring for phy/rgmii link mode [ 31.368246] ieee80211 phy0: brcmf_p2p_create_p2pdev: timeout occurred [ 31.368273] ieee80211 phy0: brcmf_cfg80211_add_iface: add iface p2p-dev-wlan0 type 10 failed: err=-5 [ 31.753708] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 31.753764] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 33.768178] vcc3v0: disabling [ 33.768195] vcc5v0: disabling [ 33.768223] usb0-vbus: disabling [1120462.079020] 8<--- cut here --- [1120462.079036] Unable to handle kernel paging request at virtual address 00e94 f20 [1120462.079046] pgd = f29bac8c [1120462.079049] [00e94f20] *pgd=00000000 [1120462.079062] Internal error: Oops: 5 [#1] SMP THUMB2 [1120462.084136] Modules linked in: zram cdc_acm ftdi_sio usbserial hci_uart btr tl btbcm bluetooth snd_soc_spdif_tx brcmfmac ecdh_generic evdev brcmutil ecc axp 20x_battery lima axp20x_adc cfg80211 gpu_sched sun4i_gpadc_iio sun4i_ts sunxi_ci r pwm_sun4i sun4i_drm_hdmi rfkill sun4i_ss sunxi_cedrus(C) uio_pdrv_genirq uio d isplay_connector cpufreq_dt sunrpc ip_tables x_tables autofs4 axp20x_usb_power i ndustrialio pinctrl_axp209 sunxi sun4i_gpadc phy_generic pwrseq_simple realtek(E )
10c) [1120462.443185] [<c0135b07>] (kthread) from [<c0100159>] (ret_from_fork+0x11/0x 38) [1120462.450588] Exception stack(0xed4b5fb0 to 0xed4b5ff8) [1120462.455821] 5fa0: 00000000 00000000 000 00000 00000000 [1120462.464184] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 000 00000 00000000 [1120462.472545] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [1120462.479344] Code: 9a01 4629 9b00 4630 (6a25) 69e6 [1120462.484508] ---[ end trace 18598cd5734e3bd7 ]--- [1120582.613729] ieee80211 phy0: brcmf_escan_timeout: timer expired
vmstat
vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 182060 162756 1439764 0 0 0 13 11 1 5 7 88 0 0
Tasks: 116 total, 1 running, 114 sleeping, 0 stopped, 1 zombie %Cpu(s): 0,3 us, 5,5 sy, 0,0 ni, 94,2 id, 0,0 wa, 0,0 hi, 0,0 si, 0,0 st MiB Mem : 2008,9 total, 178,3 free, 265,1 used, 1565,5 buff/cache MiB Swap: 1004,5 total, 1004,5 free, 0,0 used. 1661,7 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3599 root 20 0 0 0 0 I 9,9 0,0 0:42.40 kworker/0:2-events_freezable_power_ 4953 root 20 0 9372 2564 2048 R 1,3 0,1 0:00.39 top 1149 root 19 -1 26600 4500 2796 S 0,7 0,2 135:05.87 oscam.armel 3084 fhem 20 0 165124 125888 9936 S 0,7 6,1 265:19.25 perl 3560 root 20 0 10228 5240 4464 S 0,3 0,3 0:00.81 sshd 1 root 20 0 32216 6976 5148 S 0,0 0,3 2:49.55 systemd 2 root 20 0 0 0 0 S 0,0 0,0 0:02.26 kthreadd
-
ok, i would try a reboot every 3 days, i think this want do that
sudo crontab -e 0 1 */3 * * /sbin/shutdown -r now -
Have armbian a watchdog that can do that by a mistake or do you mean a cron?
-
a few Days, every think looks fine and run fine, and now today the cubie goes down again.
in the fhem log, i can see the problem must be between this time
2020.11.18 07:46:14.951 1: [Freezemon] myFreezemon: possible freeze starting at 07:46:12, delay is 2.946 possibly caused by: fn-NotifyFn(Wetter) fn-NotifyFn(rd_Batterie) fn-NotifyFn(rd_Batterie_Level) tmr-Weather_GetUpdate(YahooWetter) 2020.11.18 17:53:50.437 1: Including fhem.cfg
SpoilerThe syslog shows
Nov 18 00:00:01 localhost CRON[28090]: (root) CMD (/usr/lib/armbian/armbian-truncate-logs) Nov 18 00:00:36 localhost systemd[1]: Starting Rotate log files... Nov 18 00:00:36 localhost systemd[1]: Starting Daily man-db regeneration... Nov 18 00:00:36 localhost armbian-ramlog[28188]: Mi 18. Nov 00:00:36 CET 2020: Syncing logs to storage Nov 18 00:00:37 localhost armbian-ramlog[28188]: sending incremental file list Nov 18 00:00:37 localhost armbian-ramlog[28188]: alternatives.log Nov 18 00:00:37 localhost armbian-ramlog[28188]: aptitude Nov 18 00:00:37 localhost armbian-ramlog[28188]: armbian-hardware-monitor.log Nov 18 00:00:37 localhost armbian-ramlog[28188]: auth.log Nov 18 00:00:37 localhost armbian-ramlog[28188]: bootstrap.log Nov 18 00:00:37 localhost armbian-ramlog[28188]: btmp Nov 18 00:00:37 localhost armbian-ramlog[28188]: daemon.log Nov 18 00:00:37 localhost armbian-ramlog[28188]: debug Nov 18 00:00:37 localhost armbian-ramlog[28188]: dpkg.log Nov 18 00:00:37 localhost armbian-ramlog[28188]: faillog Nov 18 00:00:37 localhost armbian-ramlog[28188]: kern.log Nov 18 00:00:37 localhost armbian-ramlog[28188]: lastlog Nov 18 17:53:42 localhost systemd-udevd[295]: Using default interface naming scheme 'v240'. Nov 18 17:53:42 localhost systemd-udevd[295]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Nov 18 17:53:42 localhost systemd-udevd[295]: link_config: could not get ethtool features for eth0 Nov 18 17:53:42 localhost fake-hwclock[224]: Current system time: 2020-11-18 16:53:27 Nov 18 17:53:42 localhost fake-hwclock[224]: fake-hwclock saved clock information is in the past: 2020-11-13 17:52:33 Nov 18 17:53:42 localhost fake-hwclock[224]: To set system time to this saved clock anyway, use "force" Nov 18 17:53:42 localhost systemd-udevd[295]: Could not set offload features of eth0: Device or resource busy Nov 18 17:53:42 localhost systemd-udevd[292]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Nov 18 17:53:42 localhost systemd-udevd[296]: Using default interface naming scheme 'v240'. Nov 18 17:53:42 localhost systemd-udevd[296]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. Nov 18 17:53:42 localhost systemd[1]: Starting Flush Journal to Persistent Storage... Nov 18 17:53:42 localhost systemd-remount-fs[235]: mount: /etc/fstab: parse error at line 3 -- ignored Nov 18 17:53:42 localhost resolvconf[246]: /etc/resolvconf/update.d/libc: Warning: /etc/resolv.conf is not a symbolic link to /etc/resolvconf/run/resolv.conf Nov 18 17:53:42 localhost armbian-zram-config[370]: Setting up swapspace version 1, size = 1004,5 MiB (1053257728 bytes) Nov 18 17:53:42 localhost armbian-zram-config[370]: no label, UUID=c16f78da-d665-4661-a22a-93ef733f9f77 Nov 18 17:53:42 localhost armbian-zram-config[370]: mke2fs 1.44.5 (15-Dec-2018) Nov 18 17:53:42 localhost armbian-zram-config[370]: Discarding device blocks: 4096/12800#010#010#010#010#010#010#010#010#010#010#010 #010#010#010#010#010#010#010#010#010#010#010done Nov 18 17:53:42 localhost armbian-zram-config[370]: Creating filesystem with 12800 4k blocks and 12800 inodes Nov 18 17:53:42 localhost armbian-zram-config[370]: Allocating group tables: 0/1#010#010#010 #010#010#010done Nov 18 17:53:42 localhost armbian-zram-config[370]: Writing inode tables: 0/1#010#010#010 #010#010#010done Nov 18 17:53:42 localhost armbian-zram-config[370]: Writing superblocks and filesystem accounting information: 0/1#010#010#010 #010#010#010done Nov 18 17:53:42 localhost armbian-ramlog[480]: Mounting /dev/zram0 as /var/log/ Nov 18 17:53:42 localhost armbian-ramlog[480]: Mi 18. Nov 17:53:36 CET 2020: Loading logs from storage Nov 18 17:53:42 localhost armbian-ramlog[480]: sending incremental file list Nov 18 17:53:42 localhost armbian-ramlog[480]: ./ Nov 18 17:53:42 localhost armbian-ramlog[480]: alternatives.log Nov 18 17:53:42 localhost armbian-ramlog[480]: aptitude Nov 18 17:53:42 localhost armbian-ramlog[480]: armbian-hardware-monitor.log Nov 18 17:53:42 localhost armbian-ramlog[480]: auth.log Nov 18 17:53:42 localhost armbian-ramlog[480]: bootstrap.log Nov 18 17:53:42 localhost armbian-ramlog[480]: btmp Nov 18 17:53:42 localhost armbian-ramlog[480]: daemon.log Nov 18 17:53:42 localhost armbian-ramlog[480]: debug Nov 18 17:53:42 localhost armbian-ramlog[480]: dpkg.log Nov 18 17:53:42 localhost armbian-ramlog[480]: faillog Nov 18 17:53:42 localhost armbian-ramlog[480]: kern.log Nov 18 17:53:42 localhost armbian-ramlog[480]: lastlog Nov 18 17:53:42 localhost armbian-ramlog[480]: messages Nov 18 17:53:42 localhost armbian-ramlog[480]: syslog Nov 18 17:53:42 localhost armbian-ramlog[480]: user.log Nov 18 17:53:42 localhost armbian-ramlog[480]: wtmp Nov 18 17:53:42 localhost armbian-ramlog[480]: apache2/ Nov 18 17:53:42 localhost armbian-ramlog[480]: apache2/access.log Nov 18 17:53:42 localhost armbian-ramlog[480]: apache2/error.log Nov 18 17:53:42 localhost kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Nov 18 17:53:42 localhost kernel: [ 0.000000] Linux version 5.8.16-sunxi (root@xeon) (arm-none-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #20.08.14 SMP Tue Oct 20 22:15:32 CEST 2020 Nov 18 17:53:42 localhost kernel: [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=50c5387d Nov 18 17:53:42 localhost kernel: [ 0.000000] CPU: div instructions available: patching division code Nov 18 17:53:42 localhost kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Nov 18 17:53:42 localhost kernel: [ 0.000000] OF: fdt: Machine model: Cubietech Cubietruck Nov 18 17:53:42 localhost kernel: [ 0.000000] Memory policy: Data cache writealloc Nov 18 17:53:42 localhost kernel: [ 0.000000] Reserved memory: created CMA memory pool at 0x4a000000, size 96 MiB Nov 18 17:53:42 localhost kernel: [ 0.000000] OF: reserved mem: initialized node default-pool, compatible id shared-dma-pool Nov 18 17:53:42 localhost kernel: [ 0.000000] Zone ranges: Nov 18 17:53:42 localhost kernel: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] Nov 18 17:53:42 localhost kernel: [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfcfffff] Nov 18 17:53:42 localhost kernel: [ 0.000000] Movable zone start for each node Nov 18 17:53:42 localhost kernel: [ 0.000000] Early memory node ranges Nov 18 17:53:42 localhost kernel: [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfcfffff] Nov 18 17:53:42 localhost kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfcfffff] Nov 18 17:53:42 localhost kernel: [ 0.000000] On node 0 totalpages: 523520 Nov 18 17:53:42 localhost kernel: [ 0.000000] Normal zone: 1728 pages used for memmap Nov 18 17:53:42 localhost kernel: [ 0.000000] Normal zone: 0 pages reserved Nov 18 17:53:42 localhost kernel: [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 Nov 18 17:53:42 localhost kernel: [ 0.000000] HighMem zone: 326912 pages, LIFO batch:63 Nov 18 17:53:42 localhost kernel: [ 0.000000] psci: probing for conduit method from DT. Nov 18 17:53:42 localhost kernel: [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT Nov 18 17:53:42 localhost kernel: [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 Nov 18 17:53:42 localhost kernel: [ 0.000000] pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096 Nov 18 17:53:42 localhost kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 Nov 18 17:53:42 localhost kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521792 Nov 18 17:53:42 localhost kernel: [ 0.000000] Kernel command line: root=UUID=19cf2f1d-1a31-4890-bc04-a2f1c4e4e021 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=ba110a34-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1 Nov 18 17:53:42 localhost kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) Nov 18 17:53:42 localhost kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) Nov 18 17:53:42 localhost kernel: [ 0.000000] allocated 2098176 bytes of page_ext Nov 18 17:53:42 localhost kernel: [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off Nov 18 17:53:42 localhost kernel: [ 0.000000] Memory: 1948168K/2094080K available (9216K kernel code, 1028K rwdata, 3240K rodata, 1024K init, 328K bss, 47608K reserved, 98304K cma-reserved, 1307648K highmem) Nov 18 17:53:42 localhost kernel: [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2f/0x368 with crng_init=0 Nov 18 17:53:42 localhost kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Nov 18 17:53:42 localhost kernel: [ 0.000000] ftrace: allocating 39966 entries in 79 pages Nov 18 17:53:42 localhost kernel: [ 0.000000] ftrace: allocated 79 pages with 5 groups Nov 18 17:53:42 localhost kernel: [ 0.000000] rcu: Hierarchical RCU implementation. Nov 18 17:53:42 localhost kernel: [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. Nov 18 17:53:42 localhost kernel: [ 0.000000] Rude variant of Tasks RCU enabled. Nov 18 17:53:42 localhost kernel: [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. Nov 18 17:53:42 localhost kernel: [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 Nov 18 17:53:42 localhost kernel: [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 Nov 18 17:53:42 localhost kernel: [ 0.000000] GIC: Using split EOI/Deactivate mode Nov 18 17:53:42 localhost kernel: [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). Nov 18 17:53:42 localhost kernel: [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns Nov 18 17:53:42 localhost kernel: [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns Nov 18 17:53:42 localhost kernel: [ 0.000017] Switching to timer-based delay loop, resolution 41ns Nov 18 17:53:42 localhost kernel: [ 0.000552] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns Nov 18 17:53:42 localhost kernel: [ 0.000890] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns Nov 18 17:53:42 localhost kernel: [ 0.001248] Console: colour dummy device 80x30 Nov 18 17:53:42 localhost kernel: [ 0.001266] printk: console [tty1] enabled Nov 18 17:53:42 localhost kernel: [ 0.001332] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) Nov 18 17:53:42 localhost kernel: [ 0.001344] pid_max: default: 32768 minimum: 301 Nov 18 17:53:42 localhost kernel: [ 0.001588] LSM: Security Framework initializing Nov 18 17:53:42 localhost kernel: [ 0.001651] Yama: becoming mindful. Nov 18 17:53:42 localhost kernel: [ 0.001857] AppArmor: AppArmor initialized Nov 18 17:53:42 localhost kernel: [ 0.001949] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Nov 18 17:53:42 localhost kernel: [ 0.001964] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) Nov 18 17:53:42 localhost kernel: [ 0.003190] CPU: Testing write buffer coherency: ok Nov 18 17:53:42 localhost kernel: [ 0.003650] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Nov 18 17:53:42 localhost kernel: [ 0.004486] Setting up static identity map for 0x40100000 - 0x40100054 Nov 18 17:53:42 localhost kernel: [ 0.004651] rcu: Hierarchical SRCU implementation. Nov 18 17:53:42 localhost kernel: [ 0.008469] smp: Bringing up secondary CPUs ... Nov 18 17:53:42 localhost kernel: [ 0.019383] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Nov 18 17:53:42 localhost kernel: [ 0.019558] smp: Brought up 1 node, 2 CPUs Nov 18 17:53:42 localhost kernel: [ 0.019570] SMP: Total of 2 processors activated (96.00 BogoMIPS). Nov 18 17:53:42 localhost kernel: [ 0.019574] CPU: All CPU(s) started in HYP mode. Nov 18 17:53:42 localhost kernel: [ 0.019577] CPU: Virtualization extensions available. Nov 18 17:53:42 localhost kernel: [ 0.020908] devtmpfs: initialized Nov 18 17:53:42 localhost kernel: [ 0.031085] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 Nov 18 17:53:42 localhost kernel: [ 0.031609] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns Nov 18 17:53:42 localhost kernel: [ 0.031653] futex hash table entries: 512 (order: 3, 32768 bytes, linear) Nov 18 17:53:42 localhost kernel: [ 0.035821] xor: measuring software checksum speed Nov 18 17:53:42 localhost kernel: [ 0.075399] arm4regs : 1136.000 MB/sec Nov 18 17:53:42 localhost kernel: [ 0.115450] 8regs : 791.000 MB/sec Nov 18 17:53:42 localhost kernel: [ 0.155502] 32regs : 747.000 MB/sec Nov 18 17:53:42 localhost kernel: [ 0.195564] neon : 1150.000 MB/sec Nov 18 17:53:42 localhost kernel: [ 0.195569] xor: using function: neon (1150.000 MB/sec) Nov 18 17:53:42 localhost kernel: [ 0.195664] pinctrl core: initialized pinctrl subsystem Nov 18 17:53:42 localhost kernel: [ 0.196343] thermal_sys: Registered thermal governor 'fair_share' Nov 18 17:53:42 localhost kernel: [ 0.196350] thermal_sys: Registered thermal governor 'bang_bang' Nov 18 17:53:42 localhost kernel: [ 0.196356] thermal_sys: Registered thermal governor 'step_wise' Nov 18 17:53:42 localhost kernel: [ 0.197388] NET: Registered protocol family 16 Nov 18 17:53:42 localhost kernel: [ 0.199307] DMA: preallocated 256 KiB pool for atomic coherent allocations Nov 18 17:53:42 localhost kernel: [ 0.199937] audit: initializing netlink subsys (disabled) Nov 18 17:53:42 localhost kernel: [ 0.200269] audit: type=2000 audit(0.192:1): state=initialized audit_enabled=0 res=1 Nov 18 17:53:42 localhost kernel: [ 0.200915] cpuidle: using governor ladder Nov 18 17:53:42 localhost kernel: [ 0.200946] cpuidle: using governor menu Nov 18 17:53:42 localhost kernel: [ 0.201514] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. Nov 18 17:53:42 localhost kernel: [ 0.201520] hw-breakpoint: maximum watchpoint size is 8 bytes. Nov 18 17:53:42 localhost kernel: [ 0.228905] cryptd: max_cpu_qlen set to 1000 Nov 18 17:53:42 localhost kernel: [ 0.300198] raid6: neonx8 gen() 699 MB/s Nov 18 17:53:42 localhost kernel: [ 0.368333] raid6: neonx8 xor() 524 MB/s Nov 18 17:53:42 localhost kernel: [ 0.436463] raid6: neonx4 gen() 752 MB/s Nov 18 17:53:42 localhost kernel: [ 0.504595] raid6: neonx4 xor() 569 MB/s Nov 18 17:53:42 localhost kernel: [ 0.572728] raid6: neonx2 gen() 827 MB/s Nov 18 17:53:42 localhost kernel: [ 0.640846] raid6: neonx2 xor() 590 MB/s Nov 18 17:53:42 localhost kernel: [ 0.709006] raid6: neonx1 gen() 738 MB/s Nov 18 17:53:42 localhost kernel: [ 0.777131] raid6: neonx1 xor() 511 MB/s Nov 18 17:53:42 localhost kernel: [ 0.845248] raid6: int32x8 gen() 273 MB/s Nov 18 17:53:42 localhost kernel: [ 0.913414] raid6: int32x8 xor() 160 MB/s Nov 18 17:53:42 localhost kernel: [ 0.981592] raid6: int32x4 gen() 323 MB/s Nov 18 17:53:42 localhost kernel: [ 1.049709] raid6: int32x4 xor() 186 MB/s Nov 18 17:53:42 localhost kernel: [ 1.117853] raid6: int32x2 gen() 361 MB/s Nov 18 17:53:42 localhost kernel: [ 1.185955] raid6: int32x2 xor() 192 MB/s Nov 18 17:53:42 localhost kernel: [ 1.254140] raid6: int32x1 gen() 365 MB/s Nov 18 17:53:42 localhost kernel: [ 1.322249] raid6: int32x1 xor() 173 MB/s Nov 18 17:53:42 localhost kernel: [ 1.322254] raid6: using algorithm neonx2 gen() 827 MB/s Nov 18 17:53:42 localhost kernel: [ 1.322257] raid6: .... xor() 590 MB/s, rmw enabled Nov 18 17:53:42 localhost kernel: [ 1.322262] raid6: using neon recovery algorithm Nov 18 17:53:42 localhost kernel: [ 1.324264] iommu: Default domain type: Translated Nov 18 17:53:42 localhost kernel: [ 1.324714] SCSI subsystem initialized Nov 18 17:53:42 localhost kernel: [ 1.325090] libata version 3.00 loaded. Nov 18 17:53:42 localhost kernel: [ 1.325366] usbcore: registered new interface driver usbfs Nov 18 17:53:42 localhost kernel: [ 1.325425] usbcore: registered new interface driver hub Nov 18 17:53:42 localhost armbian-ramlog[480]: apache2/other_vhosts_access.log Nov 18 17:53:42 localhost armbian-ramlog[480]: apt/ Nov 18 17:53:42 localhost armbian-ramlog[480]: apt/history.log Nov 18 17:53:42 localhost armbian-ramlog[480]: apt/term.log Nov 18 17:53:42 localhost armbian-ramlog[480]: chrony/ Nov 18 17:53:42 localhost armbian-ramlog[480]: ipc/ Nov 18 17:53:42 localhost armbian-ramlog[480]: ipc/CCcam-bcommands.log Nov 18 17:53:42 localhost armbian-ramlog[480]: ipc/CCcam-changes.log Nov 18 17:53:42 localhost armbian-ramlog[480]: ipc/CCcam-iusers.log Nov 18 17:53:42 localhost armbian-ramlog[480]: ipc/NewCS-watchdog.log Nov 18 17:53:42 localhost armbian-ramlog[480]: ipc/OSEmu.log Nov 18 17:53:42 localhost armbian-ramlog[480]: ipc/OScam.log Nov 18 17:53:42 localhost armbian-ramlog[480]: ipc/gbox-watchdog.log Nov 18 17:53:42 localhost armbian-ramlog[480]: ipc/sBox-watchdog.log Nov 18 17:53:42 localhost armbian-ramlog[480]: private/ Nov 18 17:53:42 localhost armbian-ramlog[480]: sysstat/ Nov 18 17:53:42 localhost armbian-ramlog[480]: unattended-upgrades/ Nov 18 17:53:42 localhost armbian-ramlog[480]: unattended-upgrades/unattended-upgrades-shutdown.log Nov 18 17:53:42 localhost armbian-ramlog[480]: sent 1,343,120 bytes received 621 bytes 895,827.33 bytes/sec Nov 18 17:53:42 localhost kernel: [ 1.325499] usbcore: registered new device driver usb Nov 18 17:53:42 localhost armbian-ramlog[480]: total size is 1,340,587 speedup is 1.00 Nov 18 17:53:42 localhost systemd[1]: Started Flush Journal to Persistent Storage. Nov 18 17:53:42 localhost kernel: [ 1.325606] mc: Linux media interface: v0.10 Nov 18 17:53:42 localhost kernel: [ 1.325638] videodev: Linux video capture interface: v2.00 Nov 18 17:53:42 localhost kernel: [ 1.325796] pps_core: LinuxPPS API ver. 1 registered Nov 18 17:53:42 localhost systemd[1]: Starting Create Volatile Files and Directories... Nov 18 17:53:42 localhost kernel: [ 1.325801] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> Nov 18 17:53:42 localhost kernel: [ 1.325825] PTP clock support registered Nov 18 17:53:42 localhost kernel: [ 1.326470] Advanced Linux Sound Architecture Driver Initialized. Nov 18 17:53:42 localhost systemd[1]: Started Create Volatile Files and Directories. Nov 18 17:53:42 localhost systemd[1]: Starting RPC bind portmap service... Nov 18 17:53:42 localhost systemd[1]: Started Entropy daemon using the HAVEGE algorithm. Nov 18 17:53:42 localhost systemd[1]: Condition check resulted in Network Time Synchronization being skipped. Nov 18 17:53:42 localhost systemd[1]: Starting Update UTMP about System Boot/Shutdown... Nov 18 17:53:42 localhost systemd[1]: Started RPC bind portmap service. Nov 18 17:53:42 localhost systemd[1]: Started Update UTMP about System Boot/Shutdown. Nov 18 17:53:42 localhost systemd[1]: Reached target System Initialization. Nov 18 17:53:42 localhost systemd[1]: Starting Armbian hardware optimization... Nov 18 17:53:42 localhost systemd[1]: Listening on D-Bus System Message Bus Socket. Nov 18 17:53:42 localhost systemd[1]: Starting Armbian hardware monitoring... Nov 18 17:53:42 localhost systemd[1]: Started Daily Cleanup of Temporary Directories. Nov 18 17:53:42 localhost systemd[1]: Started Daily apt download activities. Nov 18 17:53:42 localhost systemd[1]: Started Daily apt upgrade and clean activities. Nov 18 17:53:42 localhost systemd[1]: Started Daily man-db regeneration. Nov 18 17:53:42 localhost systemd[1]: Listening on PC/SC Smart Card Daemon Activation Socket. Nov 18 17:53:42 localhost systemd[1]: Reached target Sockets. Nov 18 17:53:42 localhost systemd[1]: Started Clean PHP session files every 30 mins. Nov 18 17:53:42 localhost systemd[1]: Started Daily rotation of log files. Nov 18 17:53:42 localhost systemd[1]: Reached target Timers. Nov 18 17:53:42 localhost systemd[1]: Reached target RPC Port Mapper. Nov 18 17:53:42 localhost systemd[1]: Reached target Remote File Systems (Pre). Nov 18 17:53:42 localhost systemd[1]: Reached target Remote File Systems. Nov 18 17:53:42 localhost systemd[1]: Started Armbian hardware monitoring. Nov 18 17:53:42 localhost systemd[1]: Started Armbian hardware optimization. Nov 18 17:53:42 localhost systemd[1]: Reached target Basic System. Nov 18 17:53:42 localhost systemd[1]: Condition check resulted in getty on tty2-tty6 if dbus and logind are not available being skipped. Nov 18 17:53:42 localhost systemd[1]: Starting rng-tools.service... Nov 18 17:53:42 localhost systemd[1]: Starting Dispatcher daemon for systemd-networkd... Nov 18 17:53:42 localhost systemd[1]: Started Manage Sound Card State (restore and store). Nov 18 17:53:42 localhost systemd[1]: Started Swapspace, a dynamic swap space manager. Nov 18 17:53:42 localhost rng-tools[548]: Starting Hardware RNG entropy gatherer daemon: rngd. Nov 18 17:53:42 localhost systemd[1]: Starting System Logging Service... Nov 18 17:53:42 localhost alsactl[551]: alsactl 1.1.8 daemon started Nov 18 17:53:42 localhost rngd[556]: rngd 2-unofficial-mt.14 starting up... Nov 18 17:53:42 localhost rngd[556]: entropy feed to the kernel ready Nov 18 17:53:42 localhost systemd[1]: Starting LSB: Load kernel modules needed to enable cpufreq scaling... Nov 18 17:53:42 localhost systemd[1]: Started Regular background program processing daemon. Nov 18 17:53:42 localhost systemd[1]: Starting Resets System Activity Data Collector... Nov 18 17:53:42 localhost systemd[1]: Starting Initialize hardware monitoring sensors... Nov 18 17:53:42 localhost systemd[1]: Started D-Bus System Message Bus. Nov 18 17:53:42 localhost cron[563]: (CRON) INFO (pidfile fd = 3) Nov 18 17:53:42 localhost cron[563]: (*system*) WRONG FILE OWNER (/etc/crontab) Nov 18 17:53:42 localhost rsyslogd: action '*' treated as ':omusrmsg:*' - please use ':omusrmsg:*' syntax instead, '*' will not be supported in the future [v8.1901.0 try https://www.rsyslog.com/e/2184 ] Nov 18 17:53:42 localhost rsyslogd: error during parsing file /etc/rsyslog.conf, on or before line 94: warnings occured in file '/etc/rsyslog.conf' around line 94 [v8.1901.0 try https://www.rsyslog.com/e/2207 ] Nov 18 17:53:42 localhost rsyslogd: imuxsock: Acquired UNIX socket '/run/systemd/journal/syslog' (fd 3) from systemd. [v8.1901.0] Nov 18 17:53:42 localhost rsyslogd: [origin software="rsyslogd" swVersion="8.1901.0" x-pid="557" x-info="https://www.rsyslog.com"] start Nov 18 17:53:42 localhost cron[563]: (CRON) INFO (Running @reboot jobs) Nov 18 17:53:42 localhost rsyslogd: Could not open output pipe '/dev/xconsole':: No such file or directory [v8.1901.0 try https://www.rsyslog.com/e/2039 ] Nov 18 17:53:42 localhost rsyslogd: action 'action-10-builtin:ompipe' suspended (module 'builtin:ompipe'), retry 0. There should be messages before this one giving the reason for suspension. [v8.1901.0 try https://www.rsyslog.com/e/2007 ] Nov 18 17:53:42 localhost rsyslogd: action 'action-10-builtin:ompipe' suspended (module 'builtin:ompipe'), next retry is Wed Nov 18 17:54:12 2020, retry nbr 0. There should be messages before this one giving the reason for suspension. [v8.1901.0 try https://www.rsyslog.com/e/2007 ] Nov 18 17:53:42 localhost kernel: [ 1.327254] NetLabel: Initializing Nov 18 17:53:42 localhost kernel: [ 1.327261] NetLabel: domain hash size = 128 Nov 18 17:53:42 localhost kernel: [ 1.327264] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO Nov 18 17:53:42 localhost kernel: [ 1.327350] NetLabel: unlabeled traffic allowed by default Nov 18 17:53:42 localhost kernel: [ 1.328149] clocksource: Switched to clocksource arch_sys_counter Nov 18 17:53:42 localhost kernel: [ 1.434133] VFS: Disk quotas dquot_6.6.0 Nov 18 17:53:42 localhost kernel: [ 1.434243] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Nov 18 17:53:42 localhost kernel: [ 1.434945] AppArmor: AppArmor Filesystem Enabled Nov 18 17:53:42 localhost kernel: [ 1.435990] simple-framebuffer bfd00000.framebuffer: framebuffer at 0xbfd00000, 0x300000 bytes, mapped to 0x(ptrval) Nov 18 17:53:42 localhost kernel: [ 1.436005] simple-framebuffer bfd00000.framebuffer: format=x8r8g8b8, mode=1024x768x32, linelength=4096 Nov 18 17:53:42 localhost kernel: [ 1.437485] Console: switching to colour frame buffer device 128x48 Nov 18 17:53:42 localhost kernel: [ 1.451586] simple-framebuffer bfd00000.framebuffer: fb0: simplefb registered! Nov 18 17:53:42 localhost kernel: [ 1.460782] NET: Registered protocol family 2 Nov 18 17:53:42 localhost kernel: [ 1.461701] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) Nov 18 17:53:42 localhost kernel: [ 1.461759] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) Nov 18 17:53:42 localhost kernel: [ 1.461871] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) Nov 18 17:53:42 localhost kernel: [ 1.461994] TCP: Hash tables configured (established 8192 bind 8192) Nov 18 17:53:42 localhost kernel: [ 1.462184] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) Nov 18 17:53:42 localhost kernel: [ 1.462248] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) Nov 18 17:53:42 localhost kernel: [ 1.462581] NET: Registered protocol family 1 Nov 18 17:53:42 localhost kernel: [ 1.463099] Trying to unpack rootfs image as initramfs... Nov 18 17:53:42 localhost kernel: [ 2.241538] Freeing initrd memory: 9656K Nov 18 17:53:42 localhost kernel: [ 2.242326] hw perfevents: no interrupt-affinity property for /pmu, guessing. Nov 18 17:53:42 localhost kernel: [ 2.242689] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available Nov 18 17:53:42 localhost kernel: [ 2.244381] Initialise system trusted keyrings Nov 18 17:53:42 localhost kernel: [ 2.244448] Key type blacklist registered Nov 18 17:53:42 localhost kernel: [ 2.244801] workingset: timestamp_bits=14 max_order=19 bucket_order=5 Nov 18 17:53:42 localhost kernel: [ 2.250821] zbud: loaded Nov 18 17:53:42 localhost kernel: [ 2.252737] squashfs: version 4.0 (2009/01/31) Phillip Lougher Nov 18 17:53:42 localhost kernel: [ 2.253978] fuse: init (API version 7.31) Nov 18 17:53:42 localhost kernel: [ 2.257322] integrity: Platform Keyring initialized Nov 18 17:53:42 localhost kernel: [ 2.374772] Key type asymmetric registered Nov 18 17:53:42 localhost kernel: [ 2.374783] Asymmetric key parser 'x509' registered Nov 18 17:53:42 localhost kernel: [ 2.374997] bounce: pool size: 64 pages Nov 18 17:53:42 localhost kernel: [ 2.375089] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) Nov 18 17:53:42 localhost kernel: [ 2.375386] io scheduler mq-deadline registered Nov 18 17:53:42 localhost kernel: [ 2.375395] io scheduler kyber registered Nov 18 17:53:42 localhost kernel: [ 2.375606] io scheduler bfq registered Nov 18 17:53:42 localhost kernel: [ 2.379470] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator Nov 18 17:53:42 localhost kernel: [ 2.381565] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver Nov 18 17:53:42 localhost kernel: [ 2.394399] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled Nov 18 17:53:42 localhost kernel: [ 2.397492] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator Nov 18 17:53:42 localhost kernel: [ 2.398089] printk: console [ttyS0] disabled Nov 18 17:53:42 localhost kernel: [ 2.398192] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 50, base_baud = 1500000) is a 16550A Nov 18 17:53:42 localhost kernel: [ 2.398285] printk: console [ttyS0] enabled Nov 18 17:53:42 localhost kernel: [ 2.399411] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 51, base_baud = 1500000) is a 16550A Nov 18 17:53:42 localhost kernel: [ 2.399629] serial serial0: tty port ttyS2 registered Nov 18 17:53:42 localhost kernel: [ 2.410240] brd: module loaded Nov 18 17:53:42 localhost kernel: [ 2.419172] loop: module loaded Nov 18 17:53:42 localhost kernel: [ 2.420448] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regulator Nov 18 17:53:42 localhost kernel: [ 2.420591] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regulator Nov 18 17:53:42 localhost kernel: [ 2.422524] libphy: Fixed MDIO Bus: probed Nov 18 17:53:42 localhost kernel: [ 2.423193] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator Nov 18 17:53:42 localhost kernel: [ 2.423401] sun7i-dwmac 1c50000.ethernet: IRQ eth_wake_irq not found Nov 18 17:53:42 localhost kernel: [ 2.423410] sun7i-dwmac 1c50000.ethernet: IRQ eth_lpi not found Nov 18 17:53:42 localhost kernel: [ 2.423555] sun7i-dwmac 1c50000.ethernet: PTP uses main clock Nov 18 17:53:42 localhost kernel: [ 2.423567] sun7i-dwmac 1c50000.ethernet: no reset control found Nov 18 17:53:42 localhost kernel: [ 2.423597] sun7i-dwmac 1c50000.ethernet: no regulator found Nov 18 17:53:42 localhost kernel: [ 2.423981] sun7i-dwmac 1c50000.ethernet: Version ID not available Nov 18 17:53:42 localhost kernel: [ 2.423994] sun7i-dwmac 1c50000.ethernet: DWMAC1000 Nov 18 17:53:42 localhost kernel: [ 2.424003] sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported Nov 18 17:53:42 localhost kernel: [ 2.424012] sun7i-dwmac 1c50000.ethernet: Normal descriptors Nov 18 17:53:42 localhost kernel: [ 2.424018] sun7i-dwmac 1c50000.ethernet: Ring mode enabled Nov 18 17:53:42 localhost kernel: [ 2.424832] libphy: stmmac: probed Nov 18 17:53:42 localhost kernel: [ 2.439878] realtek: module verification failed: signature and/or required key missing - tainting kernel Nov 18 17:53:42 localhost kernel: [ 2.450090] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Nov 18 17:53:42 localhost kernel: [ 2.450126] ehci-platform: EHCI generic platform driver Nov 18 17:53:42 localhost kernel: [ 2.450709] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Nov 18 17:53:42 localhost kernel: [ 2.450741] ohci-platform: OHCI generic platform driver Nov 18 17:53:42 localhost kernel: [ 2.451708] usbcore: registered new interface driver usb-storage Nov 18 17:53:42 localhost kernel: [ 2.452985] sunxi-rtc 1c20d00.rtc: registered as rtc0 Nov 18 17:53:42 localhost kernel: [ 2.453040] sunxi-rtc 1c20d00.rtc: setting system clock to 2020-11-18T16:53:22 UTC (1605718402) Nov 18 17:53:42 localhost kernel: [ 2.453242] i2c /dev entries driver Nov 18 17:53:42 localhost kernel: [ 2.454575] axp20x-i2c 0-0034: AXP20x variant AXP209 found Nov 18 17:53:42 localhost kernel: [ 2.462184] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0 Nov 18 17:53:42 localhost kernel: [ 2.471082] ldo1: supplied by regulator-dummy Nov 18 17:53:42 localhost kernel: [ 2.471478] ldo2: supplied by regulator-dummy Nov 18 17:53:42 localhost kernel: [ 2.472637] ldo3: supplied by regulator-dummy Nov 18 17:53:42 localhost kernel: [ 2.473360] ldo4: supplied by regulator-dummy Nov 18 17:53:42 localhost kernel: [ 2.473590] ldo5: supplied by regulator-dummy Nov 18 17:53:42 localhost kernel: [ 2.474285] dcdc2: supplied by regulator-dummy Nov 18 17:53:42 localhost kernel: [ 2.474988] dcdc3: supplied by regulator-dummy Nov 18 17:53:42 localhost kernel: [ 2.480255] random: fast init done Nov 18 17:53:42 localhost kernel: [ 2.480460] axp20x-i2c 0-0034: Backup (RTC) battery charging is enabled Nov 18 17:53:42 localhost kernel: [ 2.480606] axp20x-i2c 0-0034: AXP20X driver loaded Nov 18 17:53:42 localhost kernel: [ 2.484525] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) Nov 18 17:53:42 localhost kernel: [ 2.485341] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator Nov 18 17:53:42 localhost kernel: [ 2.486633] sun4i-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator Nov 18 17:53:42 localhost kernel: [ 2.486782] sunxi-mmc 1c0f000.mmc: Got CD GPIO Nov 18 17:53:42 localhost kernel: [ 2.512485] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB Nov 18 17:53:42 localhost kernel: [ 2.516289] ledtrig-cpu: registered to indicate activity on CPUs Nov 18 17:53:42 localhost kernel: [ 2.516390] hid: raw HID events driver (C) Jiri Kosina Nov 18 17:53:42 localhost kernel: [ 2.516560] usbcore: registered new interface driver usbhid Nov 18 17:53:42 localhost kernel: [ 2.516564] usbhid: USB HID core driver Nov 18 17:53:42 localhost kernel: [ 2.520015] debugfs: Directory '1c22c00.codec' with parent 'sun4i-codec' already present! Nov 18 17:53:42 localhost kernel: [ 2.521572] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok Nov 18 17:53:42 localhost kernel: [ 2.525086] Initializing XFRM netlink socket Nov 18 17:53:42 localhost kernel: [ 2.525759] NET: Registered protocol family 10 Nov 18 17:53:42 localhost kernel: [ 2.561850] mmc0: host does not support reading read-only switch, assuming write-enable Nov 18 17:53:42 localhost kernel: [ 2.565057] mmc0: new high speed SDHC card at address e624 Nov 18 17:53:42 localhost kernel: [ 2.567017] mmcblk0: mmc0:e624 SU08G 7.40 GiB Nov 18 17:53:42 localhost kernel: [ 2.574317] mmcblk0: p1 Nov 18 17:53:42 localhost kernel: [ 2.587847] Segment Routing with IPv6 Nov 18 17:53:42 localhost kernel: [ 2.587983] NET: Registered protocol family 17 Nov 18 17:53:42 localhost kernel: [ 2.588027] NET: Registered protocol family 15 Nov 18 17:53:42 localhost kernel: [ 2.588198] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. Nov 18 17:53:42 localhost kernel: [ 2.588413] 8021q: 802.1Q VLAN Support v1.8 Nov 18 17:53:42 localhost kernel: [ 2.588490] Key type dns_resolver registered Nov 18 17:53:42 localhost kernel: [ 2.588976] Registering SWP/SWPB emulation handler Nov 18 17:53:42 localhost kernel: [ 2.589418] registered taskstats version 1 Nov 18 17:53:42 localhost kernel: [ 2.589428] Loading compiled-in X.509 certificates Nov 18 17:53:42 localhost kernel: [ 2.597208] Loaded X.509 cert 'Build time autogenerated kernel key: 1db26793b2098835541128330c1baea0c341ef90' Nov 18 17:53:42 localhost kernel: [ 2.597403] zswap: loaded using pool lzo/zbud Nov 18 17:53:42 localhost kernel: [ 2.598240] Key type ._fscrypt registered Nov 18 17:53:42 localhost kernel: [ 2.598249] Key type .fscrypt registered Nov 18 17:53:42 localhost kernel: [ 2.598253] Key type fscrypt-provisioning registered Nov 18 17:53:42 localhost kernel: [ 2.604949] Btrfs loaded, crc32c=crc32c-generic Nov 18 17:53:42 localhost kernel: [ 2.632798] Key type encrypted registered Nov 18 17:53:42 localhost kernel: [ 2.632823] AppArmor: AppArmor sha1 policy hashing enabled Nov 18 17:53:42 localhost kernel: [ 2.651154] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regulator Nov 18 17:53:42 localhost kernel: [ 2.651267] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regulator Nov 18 17:53:42 localhost kernel: [ 2.708190] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP Nov 18 17:53:42 localhost kernel: [ 2.708235] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled Nov 18 17:53:42 localhost kernel: [ 2.708265] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode Nov 18 17:53:42 localhost kernel: [ 2.708280] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc Nov 18 17:53:42 localhost kernel: [ 2.709476] scsi host0: ahci-sunxi Nov 18 17:53:42 localhost kernel: [ 2.709949] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 37 Nov 18 17:53:42 localhost kernel: [ 2.721832] of_cfs_init Nov 18 17:53:42 localhost kernel: [ 2.721984] of_cfs_init: OK Nov 18 17:53:42 localhost kernel: [ 2.722193] ALSA device list: Nov 18 17:53:42 localhost kernel: [ 2.722202] #0: sun4i-codec Nov 18 17:53:42 localhost kernel: [ 3.022605] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Nov 18 17:53:42 localhost kernel: [ 3.024549] ata1.00: supports DRM functions and may not be fully accessible Nov 18 17:53:42 localhost kernel: [ 3.024563] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133 Nov 18 17:53:42 localhost kernel: [ 3.024570] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32) Nov 18 17:53:42 localhost kernel: [ 3.025236] ata1.00: supports DRM functions and may not be fully accessible Nov 18 17:53:42 localhost kernel: [ 3.025676] ata1.00: configured for UDMA/133 Nov 18 17:53:42 localhost kernel: [ 3.026322] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5 Nov 18 17:53:42 localhost kernel: [ 3.027314] scsi 0:0:0:0: Attached scsi generic sg0 type 0 Nov 18 17:53:42 localhost kernel: [ 3.028078] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) Nov 18 17:53:42 localhost kernel: [ 3.028258] sd 0:0:0:0: [sda] Write Protect is off Nov 18 17:53:42 localhost kernel: [ 3.028271] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Nov 18 17:53:42 localhost kernel: [ 3.028399] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Nov 18 17:53:42 localhost kernel: [ 3.030379] sda: sda1 Nov 18 17:53:42 localhost kernel: [ 3.031824] sd 0:0:0:0: [sda] Attached SCSI disk Nov 18 17:53:42 localhost kernel: [ 3.036291] Freeing unused kernel memory: 1024K Nov 18 17:53:42 localhost kernel: [ 3.048473] Run /init as init process Nov 18 17:53:42 localhost kernel: [ 3.048484] with arguments: Nov 18 17:53:42 localhost kernel: [ 3.048490] /init Nov 18 17:53:42 localhost kernel: [ 3.048494] with environment: Nov 18 17:53:42 localhost kernel: [ 3.048498] HOME=/ Nov 18 17:53:42 localhost kernel: [ 3.048501] TERM=linux Nov 18 17:53:42 localhost kernel: [ 3.048505] ubootpart=ba110a34-01 Nov 18 17:53:42 localhost kernel: [ 3.048508] ubootsource=mmc Nov 18 17:53:42 localhost kernel: [ 3.048512] sunxi_ve_mem_reserve=0 Nov 18 17:53:42 localhost kernel: [ 3.048516] sunxi_g2d_mem_reserve=0 Nov 18 17:53:42 localhost kernel: [ 3.048519] sunxi_fb_mem_reserve=16 Nov 18 17:53:42 localhost kernel: [ 3.048523] cgroup_enable=memory Nov 18 17:53:42 localhost kernel: [ 3.049054] process '/usr/bin/sh' started with executable stack Nov 18 17:53:42 localhost kernel: [ 3.748277] sunxi-mmc 1c12000.mmc: allocated mmc-pwrseq Nov 18 17:53:42 localhost kernel: [ 3.780248] sunxi-mmc 1c12000.mmc: initialized, max. request size: 16384 KB Nov 18 17:53:42 localhost kernel: [ 3.802372] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) Nov 18 17:53:42 localhost kernel: [ 3.803974] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) Nov 18 17:53:42 localhost kernel: [ 3.805589] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) Nov 18 17:53:42 localhost kernel: [ 3.808586] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) Nov 18 17:53:42 localhost kernel: [ 3.825106] mmc1: new high speed SDIO card at address 0001 Nov 18 17:53:42 localhost kernel: [ 4.002352] axp20x-gpio axp20x-gpio: DMA mask not set Nov 18 17:53:42 localhost kernel: [ 4.010700] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded Nov 18 17:53:42 localhost kernel: [ 4.085803] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set Nov 18 17:53:42 localhost kernel: [ 4.930834] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) Nov 18 17:53:42 localhost kernel: [ 7.036242] random: systemd: uninitialized urandom read (16 bytes read) Nov 18 17:53:42 localhost kernel: [ 7.053500] random: systemd: uninitialized urandom read (16 bytes read) Nov 18 17:53:42 localhost kernel: [ 7.055776] random: systemd: uninitialized urandom read (16 bytes read) Nov 18 17:53:42 localhost kernel: [ 7.537425] RPC: Registered named UNIX socket transport module. Nov 18 17:53:42 localhost kernel: [ 7.537435] RPC: Registered udp transport module. Nov 18 17:53:42 localhost kernel: [ 7.537439] RPC: Registered tcp transport module. Nov 18 17:53:42 localhost kernel: [ 7.537442] RPC: Registered tcp NFSv4.1 backchannel transport module. Nov 18 17:53:42 localhost kernel: [ 7.621677] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro Nov 18 17:53:42 localhost kernel: [ 9.398316] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned. Nov 18 17:53:42 localhost kernel: [ 9.406426] cedrus 1c0e000.video-codec: Device registered as /dev/video0 Nov 18 17:53:42 localhost kernel: [ 9.506487] sun4i-ss 1c15000.crypto-engine: Die ID 0 Nov 18 17:53:42 localhost kernel: [ 9.605905] sun4i-drm display-engine: bound 1e00000.display-frontend (ops 0xc0a97330) Nov 18 17:53:42 localhost kernel: [ 9.606086] sun4i-drm display-engine: bound 1e20000.display-frontend (ops 0xc0a97330) Nov 18 17:53:42 localhost kernel: [ 9.606604] sun4i-drm display-engine: bound 1e60000.display-backend (ops 0xc0a96b74) Nov 18 17:53:42 localhost kernel: [ 9.607010] sun4i-drm display-engine: bound 1e40000.display-backend (ops 0xc0a96b74) Nov 18 17:53:42 localhost kernel: [ 9.607851] sun4i-drm display-engine: No panel or bridge found... RGB output disabled Nov 18 17:53:42 localhost kernel: [ 9.607885] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc0a95600) Nov 18 17:53:42 localhost kernel: [ 9.608812] sun4i-drm display-engine: No panel or bridge found... RGB output disabled Nov 18 17:53:42 localhost kernel: [ 9.608843] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xc0a95600) Nov 18 17:53:42 localhost kernel: [ 9.641763] sun4i-drm display-engine: bound 1c16000.hdmi (ops sun4i_hdmi_ops [sun4i_drm_hdmi]) Nov 18 17:53:42 localhost kernel: [ 9.641787] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). Nov 18 17:53:42 localhost kernel: [ 9.641800] checking generic (bfd00000 300000) vs hw (0 ffffffff) Nov 18 17:53:42 localhost kernel: [ 9.641807] fb0: switching to sun4i-drm-fb from simple Nov 18 17:53:42 localhost kernel: [ 9.660761] Console: switching to colour dummy device 80x30 Nov 18 17:53:42 localhost kernel: [ 9.662310] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 Nov 18 17:53:42 localhost kernel: [ 9.662411] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes Nov 18 17:53:42 localhost kernel: [ 9.718797] Registered IR keymap rc-empty Nov 18 17:53:42 localhost kernel: [ 9.718947] rc rc0: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0 Nov 18 17:53:42 localhost kernel: [ 9.757655] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter Nov 18 17:53:42 localhost kernel: [ 9.757924] input: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0/input1 Nov 18 17:53:42 localhost kernel: [ 9.780519] sunxi-ir 1c21800.ir: initialized sunXi IR driver Nov 18 17:53:42 localhost kernel: [ 10.064999] axp20x-adc axp20x-adc: DMA mask not set Nov 18 17:53:42 localhost kernel: [ 10.149498] cfg80211: Loading compiled-in X.509 certificates for regulatory database Nov 18 17:53:42 localhost kernel: [ 10.151461] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set Nov 18 17:53:42 localhost kernel: [ 10.155108] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' Nov 18 17:53:42 localhost kernel: [ 10.167145] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 Nov 18 17:53:42 localhost kernel: [ 10.167161] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db Nov 18 17:53:42 localhost kernel: [ 10.173659] ehci-platform 1c14000.usb: EHCI Host Controller Nov 18 17:53:42 localhost kernel: [ 10.173704] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 Nov 18 17:53:42 localhost kernel: [ 10.251639] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 Nov 18 17:53:42 localhost kernel: [ 10.251714] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 Nov 18 17:53:42 localhost kernel: [ 10.251772] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 Nov 18 17:53:42 localhost kernel: [ 10.251820] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus Nov 18 17:53:42 localhost kernel: [ 10.252577] ehci-platform 1c14000.usb: irq 33, io mem 0x01c14000 Nov 18 17:53:42 localhost kernel: [ 10.276052] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 Nov 18 17:53:42 localhost kernel: [ 10.276593] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 Nov 18 17:53:42 localhost kernel: [ 10.276606] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 18 17:53:42 localhost kernel: [ 10.276614] usb usb1: Product: EHCI Host Controller Nov 18 17:53:42 localhost kernel: [ 10.276621] usb usb1: Manufacturer: Linux 5.8.16-sunxi ehci_hcd Nov 18 17:53:42 localhost kernel: [ 10.276627] usb usb1: SerialNumber: 1c14000.usb Nov 18 17:53:42 localhost kernel: [ 10.277576] hub 1-0:1.0: USB hub found Nov 18 17:53:42 localhost kernel: [ 10.277642] hub 1-0:1.0: 1 port detected Nov 18 17:53:42 localhost kernel: [ 10.278976] ehci-platform 1c1c000.usb: EHCI Host Controller Nov 18 17:53:42 localhost kernel: [ 10.279036] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 Nov 18 17:53:42 localhost kernel: [ 10.281111] lima 1c40000.gpu: bus rate = 300000000 Nov 18 17:53:42 localhost kernel: [ 10.281125] lima 1c40000.gpu: mod rate = 384000000 Nov 18 17:53:42 localhost kernel: [ 10.281975] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 1 Nov 18 17:53:42 localhost kernel: [ 10.323617] ehci-platform 1c1c000.usb: irq 38, io mem 0x01c1c000 Nov 18 17:53:42 localhost kernel: [ 10.336288] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 Nov 18 17:53:42 localhost kernel: [ 10.336680] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 Nov 18 17:53:42 localhost kernel: [ 10.336690] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 18 17:53:42 localhost kernel: [ 10.336697] usb usb2: Product: EHCI Host Controller Nov 18 17:53:42 localhost kernel: [ 10.336704] usb usb2: Manufacturer: Linux 5.8.16-sunxi ehci_hcd Nov 18 17:53:42 localhost kernel: [ 10.336710] usb usb2: SerialNumber: 1c1c000.usb Nov 18 17:53:42 localhost kernel: [ 10.337739] hub 2-0:1.0: USB hub found Nov 18 17:53:42 localhost kernel: [ 10.337815] hub 2-0:1.0: 1 port detected Nov 18 17:53:42 localhost kernel: [ 10.339096] ohci-platform 1c14400.usb: Generic Platform OHCI controller Nov 18 17:53:42 localhost kernel: [ 10.339138] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 Nov 18 17:53:42 localhost kernel: [ 10.339614] ohci-platform 1c14400.usb: irq 34, io mem 0x01c14400 Nov 18 17:53:42 localhost kernel: [ 10.370077] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 Nov 18 17:53:42 localhost kernel: [ 10.410177] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 Nov 18 17:53:42 localhost kernel: [ 10.410191] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 18 17:53:42 localhost kernel: [ 10.410199] usb usb3: Product: Generic Platform OHCI controller Nov 18 17:53:42 localhost kernel: [ 10.410206] usb usb3: Manufacturer: Linux 5.8.16-sunxi ohci_hcd Nov 18 17:53:42 localhost kernel: [ 10.410213] usb usb3: SerialNumber: 1c14400.usb Nov 18 17:53:42 localhost kernel: [ 10.411619] hub 3-0:1.0: USB hub found Nov 18 17:53:42 localhost kernel: [ 10.411813] hub 3-0:1.0: 1 port detected Nov 18 17:53:42 localhost kernel: [ 10.413347] ohci-platform 1c1c400.usb: Generic Platform OHCI controller Nov 18 17:53:42 localhost kernel: [ 10.413406] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 Nov 18 17:53:42 localhost kernel: [ 10.417787] ohci-platform 1c1c400.usb: irq 39, io mem 0x01c1c400 Nov 18 17:53:42 localhost kernel: [ 10.485019] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 Nov 18 17:53:42 localhost kernel: [ 10.485045] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 18 17:53:42 localhost kernel: [ 10.485052] usb usb4: Product: Generic Platform OHCI controller Nov 18 17:53:42 localhost kernel: [ 10.485060] usb usb4: Manufacturer: Linux 5.8.16-sunxi ohci_hcd Nov 18 17:53:42 localhost kernel: [ 10.485066] usb usb4: SerialNumber: 1c1c400.usb Nov 18 17:53:42 localhost kernel: [ 10.488719] hub 4-0:1.0: USB hub found Nov 18 17:53:42 localhost kernel: [ 10.488798] hub 4-0:1.0: 1 port detected Nov 18 17:53:42 localhost kernel: [ 10.490748] usb_phy_generic usb_phy_generic.0.auto: supply vcc not found, using dummy regulator Nov 18 17:53:42 localhost kernel: [ 10.492231] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver Nov 18 17:53:42 localhost kernel: [ 10.492270] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5 Nov 18 17:53:42 localhost kernel: [ 10.492413] phy id_det change to device Nov 18 17:53:42 localhost kernel: [ 10.492652] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 Nov 18 17:53:42 localhost kernel: [ 10.492662] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Nov 18 17:53:42 localhost kernel: [ 10.492668] usb usb5: Product: MUSB HDRC host driver Nov 18 17:53:42 localhost kernel: [ 10.492675] usb usb5: Manufacturer: Linux 5.8.16-sunxi musb-hcd Nov 18 17:53:42 localhost kernel: [ 10.492682] usb usb5: SerialNumber: musb-hdrc.1.auto Nov 18 17:53:42 localhost kernel: [ 10.493616] hub 5-0:1.0: USB hub found Nov 18 17:53:42 localhost kernel: [ 10.493690] hub 5-0:1.0: 1 port detected Nov 18 17:53:42 localhost kernel: [ 10.497070] asoc-simple-card sound: dit-hifi <-> 1c21000.spdif mapping ok Nov 18 17:53:42 localhost kernel: [ 10.516495] Bluetooth: Core ver 2.22 Nov 18 17:53:42 localhost kernel: [ 10.516673] NET: Registered protocol family 31 Nov 18 17:53:42 localhost kernel: [ 10.516679] Bluetooth: HCI device and connection manager initialized Nov 18 17:53:42 localhost kernel: [ 10.516708] Bluetooth: HCI socket layer initialized Nov 18 17:53:42 localhost kernel: [ 10.516719] Bluetooth: L2CAP socket layer initialized Nov 18 17:53:42 localhost kernel: [ 10.516753] Bluetooth: SCO socket layer initialized Nov 18 17:53:42 localhost kernel: [ 10.680281] usb 2-1: new high-speed USB device number 2 using ehci-platform Nov 18 17:53:42 localhost kernel: [ 10.695312] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 Nov 18 17:53:42 localhost kernel: [ 10.759515] Bluetooth: HCI UART driver ver 2.3 Nov 18 17:53:42 localhost kernel: [ 10.759529] Bluetooth: HCI UART protocol H4 registered Nov 18 17:53:42 localhost kernel: [ 10.759534] Bluetooth: HCI UART protocol BCSP registered Nov 18 17:53:42 localhost kernel: [ 10.759706] Bluetooth: HCI UART protocol LL registered Nov 18 17:53:42 localhost kernel: [ 10.759712] Bluetooth: HCI UART protocol ATH3K registered Nov 18 17:53:42 localhost kernel: [ 10.759776] Bluetooth: HCI UART protocol Three-wire (H5) registered Nov 18 17:53:42 localhost kernel: [ 10.760287] Bluetooth: HCI UART protocol Broadcom registered Nov 18 17:53:42 localhost kernel: [ 10.760512] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator Nov 18 17:53:42 localhost kernel: [ 10.760649] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator Nov 18 17:53:42 localhost kernel: [ 10.837076] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 Nov 18 17:53:42 localhost kernel: [ 10.837090] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Nov 18 17:53:42 localhost kernel: [ 10.837097] usb 2-1: Product: USB 2.0 Hub Nov 18 17:53:42 localhost kernel: [ 10.838246] hub 2-1:1.0: USB hub found Nov 18 17:53:42 localhost kernel: [ 10.838456] hub 2-1:1.0: 4 ports detected Nov 18 17:53:42 localhost kernel: [ 10.944267] usb 3-1: new full-speed USB device number 2 using ohci-platform Nov 18 17:53:42 localhost kernel: [ 10.981799] cfg80211: failed to load regulatory.db Nov 18 17:53:42 localhost kernel: [ 11.145360] Bluetooth: hci0: BCM: chip id 63 Nov 18 17:53:42 localhost kernel: [ 11.147981] Bluetooth: hci0: BCM: features 0x07 Nov 18 17:53:42 localhost kernel: [ 11.171842] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available Nov 18 17:53:42 localhost kernel: [ 11.172345] Bluetooth: hci0: BCM20702A Nov 18 17:53:42 localhost kernel: [ 11.172360] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 Nov 18 17:53:42 localhost kernel: [ 11.176844] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d Nov 18 17:53:42 localhost kernel: [ 11.186421] usb 3-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 Nov 18 17:53:42 localhost kernel: [ 11.186453] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 18 17:53:42 localhost kernel: [ 11.186472] usb 3-1: Product: FT232R USB UART Nov 18 17:53:42 localhost kernel: [ 11.186479] usb 3-1: Manufacturer: FTDI Nov 18 17:53:42 localhost kernel: [ 11.186494] usb 3-1: SerialNumber: A7031FBC Nov 18 17:53:42 localhost kernel: [ 11.244304] usb 2-1.2: new full-speed USB device number 3 using ehci-platform Nov 18 17:53:42 localhost kernel: [ 11.303763] Bluetooth: hci0: BCM: firmware Patch file not found, tried: Nov 18 17:53:42 localhost kernel: [ 11.303774] Bluetooth: hci0: BCM: 'brcm/BCM20702A1.hcd' Nov 18 17:53:42 localhost kernel: [ 11.303778] Bluetooth: hci0: BCM: 'brcm/BCM.hcd' Nov 18 17:53:42 localhost kernel: [ 11.393206] usbcore: registered new interface driver usbserial_generic Nov 18 17:53:42 localhost kernel: [ 11.393288] usbserial: USB Serial support registered for generic Nov 18 17:53:42 localhost kernel: [ 11.446026] usbcore: registered new interface driver ftdi_sio Nov 18 17:53:42 localhost kernel: [ 11.446100] usbserial: USB Serial support registered for FTDI USB Serial Device Nov 18 17:53:42 localhost kernel: [ 11.446465] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected Nov 18 17:53:42 localhost kernel: [ 11.446705] usb 3-1: Detected FT232RL Nov 18 17:53:42 localhost kernel: [ 11.454182] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0 Nov 18 17:53:42 localhost kernel: [ 11.474645] usb 2-1.2: New USB device found, idVendor=03eb, idProduct=204b, bcdDevice= 0.00 Nov 18 17:53:42 localhost kernel: [ 11.474660] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Nov 18 17:53:42 localhost kernel: [ 11.474667] usb 2-1.2: Product: CUL433 Nov 18 17:53:42 localhost kernel: [ 11.474674] usb 2-1.2: Manufacturer: busware.de Nov 18 17:53:42 localhost kernel: [ 11.676258] usb 2-1.4: new full-speed USB device number 4 using ehci-platform Nov 18 17:53:42 localhost kernel: [ 11.894199] usb 2-1.4: New USB device found, idVendor=1b1f, idProduct=c00f, bcdDevice= 9.67 Nov 18 17:53:42 localhost kernel: [ 11.894213] usb 2-1.4: New USB device strings: Mfr=4, Product=14, SerialNumber=36 Nov 18 17:53:42 localhost kernel: [ 11.894221] usb 2-1.4: Product: HM-CFG-USB Nov 18 17:53:42 localhost kernel: [ 11.894227] usb 2-1.4: Manufacturer: eQ-3 Nov 18 17:53:42 localhost kernel: [ 11.894234] usb 2-1.4: SerialNumber: MEQ0232057 Nov 18 17:53:42 localhost kernel: [ 11.899648] hid-generic 0003:1B1F:C00F.0001: hiddev0,hidraw0: USB HID v1.10 Device [eQ-3 HM-CFG-USB] on usb-1c1c000.usb-1.4/input0 Nov 18 17:53:42 localhost kernel: [ 12.029291] cdc_acm 2-1.2:1.0: ttyACM0: USB ACM device Nov 18 17:53:42 localhost kernel: [ 12.031857] usbcore: registered new interface driver cdc_acm Nov 18 17:53:42 localhost kernel: [ 12.031867] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters Nov 18 17:53:42 localhost kernel: [ 12.153894] EXT4-fs (sda1): recovery complete Nov 18 17:53:42 localhost kernel: [ 12.171345] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) Nov 18 17:53:42 localhost kernel: [ 12.660352] zram: Added device: zram0 Nov 18 17:53:42 localhost kernel: [ 12.662335] zram: Added device: zram1 Nov 18 17:53:42 localhost kernel: [ 12.666905] zram: Added device: zram2 Nov 18 17:53:42 localhost kernel: [ 12.795806] zram1: detected capacity change from 0 to 1053261824 Nov 18 17:53:42 localhost kernel: [ 13.896246] Adding 1028572k swap on /dev/zram1. Priority:5 extents:1 across:1028572k SSFS Nov 18 17:53:42 localhost kernel: [ 14.226065] zram0: detected capacity change from 0 to 52428800 Nov 18 17:53:42 localhost kernel: [ 16.552975] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard Nov 18 17:53:42 localhost kernel: [ 16.553034] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff) Nov 18 17:53:42 localhost kernel: [ 19.688400] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes Nov 18 17:53:42 localhost kernel: [ 22.413392] random: crng init done Nov 18 17:53:42 localhost kernel: [ 22.413409] random: 7 urandom warning(s) missed due to ratelimiting Nov 18 17:53:42 localhost systemd[1]: Starting WPA supplicant... Nov 18 17:53:42 localhost systemd[1]: Starting Network Manager... Nov 18 17:53:42 localhost CRON[579]: (root) CMD (/usr/lib/armbian/armbian-apt-updates) Nov 18 17:53:42 localhost systemd[1]: Starting Login Service... Nov 18 17:53:42 localhost systemd[1]: Starting Save/Restore Sound Card State... Nov 18 17:53:43 localhost systemd[1]: Starting Clean php session files... Nov 18 17:53:43 localhost systemd[1]: Started System Logging Service. Nov 18 17:53:43 localhost systemd[1]: Started rng-tools.service. Nov 18 17:53:43 localhost systemd[1]: Started Resets System Activity Data Collector. Nov 18 17:53:43 localhost wpa_supplicant[576]: Successfully initialized wpa_supplicant Nov 18 17:53:43 localhost sensors[591]: axp20x_usb-isa-0000 Nov 18 17:53:43 localhost sensors[591]: Adapter: ISA adapter Nov 18 17:53:43 localhost sensors[591]: in0: +0.02 V (min = +4.00 V) Nov 18 17:53:43 localhost sensors[591]: curr1: +0.00 A (max = +0.90 A) Nov 18 17:53:43 localhost sensors[591]: axp20x_battery-isa-0000 Nov 18 17:53:43 localhost sensors[591]: Adapter: ISA adapter Nov 18 17:53:43 localhost sensors[591]: in0: +0.00 V Nov 18 17:53:43 localhost sensors[591]: curr1: +0.00 A Nov 18 17:53:43 localhost systemd[1]: Started Save/Restore Sound Card State. Nov 18 17:53:43 localhost systemd[1]: Started Initialize hardware monitoring sensors. Nov 18 17:53:43 localhost systemd[1]: Reached target Sound Card. Nov 18 17:53:43 localhost systemd[1]: Started WPA supplicant. Nov 18 17:53:43 localhost systemd[1]: Started Login Service. Nov 18 17:53:43 localhost NetworkManager[578]: <info> [1605718423.9751] NetworkManager (version 1.14.6) is starting... (for the first time) Nov 18 17:53:43 localhost NetworkManager[578]: <info> [1605718423.9903] Read config: /etc/NetworkManager/NetworkManager.conf (lib: no-mac-addr-change.conf) (etc: 10-override-wifi-random-mac-disable.conf, 20-override-wifi-powersave-disable.conf) Nov 18 17:53:44 localhost NetworkManager[578]: <info> [1605718424.0143] wifi-nl80211: (wlan0): using nl80211 for WiFi device control Nov 18 17:53:44 localhost loadcpufreq[562]: Loading cpufreq kernel modules...done (none). Nov 18 17:53:44 localhost systemd[1]: Started LSB: Load kernel modules needed to enable cpufreq scaling. Nov 18 17:53:44 localhost NetworkManager[578]: <info> [1605718424.2061] bus-manager: acquired D-Bus service "org.freedesktop.NetworkManager" Nov 18 17:53:44 localhost systemd[1]: Starting LSB: set CPUFreq kernel parameters... Nov 18 17:53:44 localhost NetworkManager[578]: <info> [1605718424.2278] manager[0xfdc010]: monitoring kernel firmware directory '/lib/firmware'. Nov 18 17:53:44 localhost NetworkManager[578]: <info> [1605718424.2354] monitoring ifupdown state file '/run/network/ifstate'. Nov 18 17:53:44 localhost systemd[1]: Started Network Manager. Nov 18 17:53:44 localhost systemd[1]: Reached target Network. Nov 18 17:53:44 localhost systemd[1]: Condition check resulted in fast remote file copy program daemon being skipped. Nov 18 17:53:44 localhost systemd[1]: Started Unattended Upgrades Shutdown. Nov 18 17:53:44 localhost systemd[1]: Starting Permit User Sessions... Nov 18 17:53:44 localhost systemd[1]: Starting chrony, an NTP client/server... Nov 18 17:53:44 localhost dbus-daemon[568]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.3' (uid=0 pid=578 comm="/usr/sbin/NetworkManager --no-daemon ") Nov 18 17:53:44 localhost systemd[1]: Starting FHEM Home Automation...
-
Zram was enable at the first problem. I have zram now enable again, and will see what comes
-
Can a swap partition to be the solution?
-
Spoiler
I see a lot of Ram use
Nov 11 00:32:51 localhost kernel: [454623.580814] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/system.slice/fhem.service,task=perl,pid=9922,uid=1000 Nov 11 00:32:52 localhost kernel: [454624.358596] oom_reaper: reaped process 9922 (perl), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB Nov 11 00:33:48 localhost kernel: [454680.730475] perl invoked oom-killer: gfp_mask=0x400dc2(GFP_KERNEL_ACCOUNT|__GFP_HIGHMEM|__GFP_ZERO), order=0, oom_score_adj=0 Nov 11 00:33:48 localhost kernel: [454680.730496] CPU: 1 PID: 10072 Comm: perl Tainted: G C E 5.8.16-sunxi #20.08.14 Nov 11 00:33:48 localhost kernel: [454680.730500] Hardware name: Allwinner sun7i (A20) Family Nov 11 00:33:48 localhost kernel: [454680.730537] [<c010d6cd>] (unwind_backtrace) from [<c0109a7d>] (show_stack+0x11/0x14) Nov 11 00:33:48 localhost kernel: [454680.730555] [<c0109a7d>] (show_stack) from [<c056e1c9>] (dump_stack+0x75/0x84) Nov 11 00:33:48 localhost kernel: [454680.730572] [<c056e1c9>] (dump_stack) from [<c020d70b>] (dump_header+0x43/0x16a) Nov 11 00:33:48 localhost kernel: [454680.730587] [<c020d70b>] (dump_header) from [<c020ce73>] (oom_kill_process+0x123/0x12c) Nov 11 00:33:48 localhost kernel: [454680.730597] [<c020ce73>] (oom_kill_process) from [<c020d59f>] (out_of_memory+0x19b/0x260) Nov 11 00:33:48 localhost kernel: [454680.730613] [<c020d59f>] (out_of_memory) from [<c0243c63>] (__alloc_pages_nodemask+0x913/0xc40) Nov 11 00:33:48 localhost kernel: [454680.730627] [<c0243c63>] (__alloc_pages_nodemask) from [<c0230273>] (__pte_alloc+0x1f/0x118) Nov 11 00:33:48 localhost kernel: [454680.730639] [<c0230273>] (__pte_alloc) from [<c0230d7d>] (copy_page_range+0x455/0x554) Nov 11 00:33:48 localhost kernel: [454680.730655] [<c0230d7d>] (copy_page_range) from [<c011949b>] (dup_mm+0x21f/0x340) Nov 11 00:33:48 localhost kernel: [454680.730667] [<c011949b>] (dup_mm) from [<c011a759>] (copy_process+0xf75/0x1218) Nov 11 00:33:48 localhost kernel: [454680.730679] [<c011a759>] (copy_process) from [<c011ab5f>] (_do_fork+0x63/0x344) Nov 11 00:33:48 localhost kernel: [454680.730692] [<c011ab5f>] (_do_fork) from [<c011b07f>] (sys_clone+0x5b/0x74) Nov 11 00:33:48 localhost kernel: [454680.730704] [<c011b07f>] (sys_clone) from [<c0100061>] (ret_fast_syscall+0x1/0x62) Nov 11 00:33:48 localhost kernel: [454680.730710] Exception stack(0xed05ffa8 to 0xed05fff0) Nov 11 00:33:48 localhost kernel: [454680.730720] ffa0: b6f69078 b6f694d0 01200011 00000000 00000000 00000000 Nov 11 00:33:48 localhost kernel: [454680.730730] ffc0: b6f69078 b6f694d0 00000000 00000078 00000000 00000000 b6f69010 00000001 Nov 11 00:33:48 localhost kernel: [454680.730737] ffe0: 00000078 bea008d8 b6e15253 b6db7746 Nov 11 00:33:48 localhost kernel: [454680.730742] Mem-Info: Nov 11 00:33:48 localhost kernel: [454680.730761] active_anon:459843 inactive_anon:5141 isolated_anon:0 Nov 11 00:33:48 localhost kernel: [454680.730761] active_file:268 inactive_file:308 isolated_file:32 Nov 11 00:33:48 localhost kernel: [454680.730761] unevictable:4 dirty:0 writeback:0 Nov 11 00:33:48 localhost kernel: [454680.730761] slab_reclaimable:3671 slab_unreclaimable:7421 Nov 11 00:33:48 localhost kernel: [454680.730761] mapped:1636 shmem:5228 pagetables:4752 bounce:0 Nov 11 00:33:48 localhost kernel: [454680.730761] free:21875 free_pcp:0 free_cma:10211 Nov 11 00:33:48 localhost kernel: [454680.730774] Node 0 active_anon:1839372kB inactive_anon:20564kB active_file:1072kB inactive_file:1232kB unevictable:16kB isolated(anon):0kB isolated(file):128kB mapped:6544kB dirty:0kB writeback:0kB shmem:20912kB writeback_tmp:0kB all_unreclaimable? no Nov 11 00:33:48 localhost kernel: [454680.730793] Normal free:83348kB min:3436kB low:4292kB high:5148kB reserved_highatomic:0KB active_anon:571240kB inactive_anon:5144kB active_file:120kB inactive_file:560kB unevictable:0kB writepending:0kB present:786432kB managed:749504kB mlocked:0kB kernel_stack:1168kB pagetables:5592kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:40844kB Nov 11 00:33:48 localhost kernel: [454680.730795] lowmem_reserve[]: 0 10216 0 Nov 11 00:33:48 localhost kernel: [454680.730816] HighMem free:4152kB min:5840kB low:7360kB high:8880kB reserved_highatomic:0KB active_anon:1268132kB inactive_anon:15420kB active_file:1000kB inactive_file:1232kB unevictable:16kB writepending:0kB present:1307648kB managed:1307648kB mlocked:16kB kernel_stack:0kB pagetables:13416kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB Nov 11 00:33:48 localhost kernel: [454680.730818] lowmem_reserve[]: 0 0 0 Nov 11 00:33:48 localhost kernel: [454680.730825] Normal: 855*4kB (UMEC) 416*8kB (UMEC) 669*16kB (UMEC) 283*32kB (MEC) 145*64kB (UMEC) 46*128kB (UMEC) 20*256kB (UMEC) 11*512kB (UEC) 4*1024kB (UC) 1*2048kB (E) 6*4096kB (C) = 83148kB Nov 11 00:33:48 localhost kernel: [454680.730864] HighMem: 875*4kB (UM) 123*8kB (UM) 1*16kB (U) 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 4500kB Nov 11 00:33:48 localhost kernel: [454680.730891] 5810 total pagecache pages Nov 11 00:33:48 localhost kernel: [454680.730897] 0 pages in swap cache Nov 11 00:33:48 localhost kernel: [454680.730901] Swap cache stats: add 0, delete 0, find 0/0 Nov 11 00:33:48 localhost kernel: [454680.730904] Free swap = 0kB Nov 11 00:33:48 localhost kernel: [454680.730907] Total swap = 0kB Nov 11 00:33:48 localhost kernel: [454680.730910] 523520 pages RAM Nov 11 00:33:48 localhost kernel: [454680.730913] 326912 pages HighMem/MovableOnly Nov 11 00:33:48 localhost kernel: [454680.730916] 9232 pages reserved Nov 11 00:33:48 localhost kernel: [454680.730919] 24576 pages cma reserved Nov 11 00:33:48 localhost kernel: [454680.730923] Tasks state (memory values in pages): Nov 11 00:33:48 localhost kernel: [454680.730926] [ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name Nov 11 00:33:48 localhost kernel: [454680.730954] [ 247] 0 247 8052 869 63488 0 0 systemd-journal Nov 11 00:33:48 localhost kernel: [454680.730963] [ 279] 0 279 4114 155 18432 0 -1000 systemd-udevd Nov 11 00:33:48 localhost kernel: [454680.730975] [ 391] 0 391 1812 767 14336 0 0 haveged Nov 11 00:33:48 localhost kernel: [454680.730984] [ 392] 108 392 1344 80 14336 0 0 rpcbind Nov 11 00:33:48 localhost kernel: [454680.730993] [ 443] 0 443 742 50 12288 0 0 alsactl Nov 11 00:33:48 localhost kernel: [454680.731003] [ 454] 104 454 1386 152 14336 0 -900 dbus-daemon Nov 11 00:33:48 localhost kernel: [454680.731011] [ 463] 0 463 6796 34 18432 0 0 rngd Nov 11 00:33:48 localhost kernel: [454680.731019] [ 468] 0 468 2243 176 16384 0 0 wpa_supplicant Nov 11 00:33:48 localhost kernel: [454680.731028] [ 473] 0 473 2658 166 20480 0 0 systemd-logind Nov 11 00:33:48 localhost kernel: [454680.731036] [ 480] 0 480 6117 230 24576 0 0 rsyslogd Nov 11 00:33:48 localhost kernel: [454680.731044] [ 483] 0 483 5687 1234 28672 0 0 networkd-dispat Nov 11 00:33:48 localhost kernel: [454680.731052] [ 490] 0 490 1914 51 16384 0 0 cron Nov 11 00:33:48 localhost kernel: [454680.731061] [ 491] 0 491 17360 476 47104 0 0 NetworkManager Nov 11 00:33:48 localhost kernel: [454680.731069] [ 596] 0 596 8819 1266 36864 0 0 unattended-upgr Nov 11 00:33:48 localhost kernel: [454680.731077] [ 604] 0 604 2537 68 12288 0 0 hmland Nov 11 00:33:48 localhost kernel: [454680.731085] [ 628] 0 628 2220 137 18432 0 -1000 sshd Nov 11 00:33:48 localhost kernel: [454680.731094] [ 638] 105 638 2753 65 12288 0 0 chronyd Nov 11 00:33:48 localhost kernel: [454680.731103] [ 643] 105 643 806 59 12288 0 0 chronyd Nov 11 00:33:48 localhost kernel: [454680.731112] [ 706] 0 706 49871 1598 55296 0 0 apache2 Nov 11 00:33:48 localhost kernel: [454680.731120] [ 757] 33 757 49881 1015 47104 0 0 apache2 Nov 11 00:33:48 localhost kernel: [454680.731129] [ 759] 33 759 49881 1015 47104 0 0 apache2 Nov 11 00:33:48 localhost kernel: [454680.731138] [ 762] 33 762 49881 1015 47104 0 0 apache2 Nov 11 00:33:48 localhost kernel: [454680.731147] [ 763] 33 763 49881 1015 47104 0 0 apache2 Nov 11 00:33:48 localhost kernel: [454680.731155] [ 764] 33 764 49877 996 47104 0 0 apache2 Nov 11 00:33:48 localhost kernel: [454680.731163] [ 806] 0 806 8986 159 26624 0 0 polkitd Nov 11 00:33:48 localhost kernel: [454680.731171] [ 973] 0 973 1560 212 14336 0 0 dhclient Nov 11 00:33:48 localhost kernel: [454680.731180] [ 1032] 0 1032 959 20 12288 0 0 agetty Nov 11 00:33:48 localhost kernel: [454680.731189] [ 1034] 0 1034 1620 23 14336 0 0 agetty Nov 11 00:33:48 localhost kernel: [454680.731197] [ 1062] 0 1062 1374 64 12288 0 0 oscam.armel Nov 11 00:33:48 localhost kernel: [454680.731206] [ 1064] 0 1064 6627 344 22528 0 0 oscam.armel Nov 11 00:33:48 localhost kernel: [454680.731214] [ 1078] 0 1078 482 59 8192 0 0 osemu.armel
free -h total used free shared buff/cache available Mem: 2,0Gi 1,8Gi 130Mi 7,0Mi 86Mi 149Mi Swap: 0B 0B 0B
-
Am 5.11.2020 um 20:58 schrieb lampra:
It seems to me that this service is "eating" your memory.
If you can live without it, you could stop it for some days as a test. Though I am not an expert.
Now a few days everything run's fine, and now the Problem is back
The last messages in "messages" are this
Nov 11 00:33:48 localhost kernel: [454680.731222] [ 19841] 1000 19841 453513 438156 1810432 0 0 perl Nov 11 00:33:48 localhost kernel: [454680.731231] [ 19933] 1000 19933 40085 4942 178176 0 0 node /usr/local Nov 11 00:33:48 localhost kernel: [454680.731240] [ 20030] 1000 20030 2722 127 20480 0 0 ssh Nov 11 00:33:48 localhost kernel: [454680.731255] [ 10072] 1000 10072 453404 437922 1810432 0 0 perl Nov 11 00:33:48 localhost kernel: [454680.731263] [ 10095] 1000 10095 453513 438041 1810432 0 0 perl Nov 11 00:33:48 localhost kernel: [454680.731272] [ 10100] 1000 10100 453513 438041 1808384 0 0 perl Nov 11 00:33:48 localhost kernel: [454680.731277] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/system.slice/fhem.service,task=perl,pid=19841,uid=1000 Nov 11 00:33:49 localhost kernel: [454681.241335] oom_reaper: reaped process 19841 (perl), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB Nov 11 04:17:35 localhost rsyslogd: action '*' treated as ':omusrmsg:*' - please use ':omusrmsg:*' syntax instead, '*' will not be supported in the future [v8.1901.0 try https://www.rsyslog.com/e/2184 ] Nov 11 04:17:35 localhost rsyslogd: imuxsock: Acquired UNIX socket '/run/systemd/journal/syslog' (fd 3) from systemd. [v8.1901.0] Nov 11 04:17:35 localhost rsyslogd: [origin software="rsyslogd" swVersion="8.1901.0" x-pid="473" x-info="https://www.rsyslog.com"] start Nov 11 04:17:35 localhost rsyslogd: action 'action-10-builtin:ompipe' suspended (module 'builtin:ompipe'), retry 0. There should be messages before this one giving the reason for suspension. [v8.1901.0 try https://www.rsyslog.com/e/2007 ] Nov 11 04:17:35 localhost rsyslogd: action 'action-10-builtin:ompipe' suspended (module 'builtin:ompipe'), next retry is Wed Nov 11 04:18:05 2020, retry nbr 0. There should be messages before this one giving the reason for suspension. [v8.1901.0 try https://www.rsyslog.com/e/2007 ]and in sylog
Nov 11 00:33:48 localhost kernel: [454680.731277] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/system.slice/fhem.service,task=perl,pid=19841,uid=1000 Nov 11 00:33:48 localhost kernel: [454680.731359] Out of memory: Killed process 19841 (perl) total-vm:1814052kB, anon-rss:1752172kB, file-rss:452kB, shmem-rss:0kB, UID:1000 pgtables:1768kB oom_score_adj:0 Nov 11 00:33:49 localhost kernel: [454681.241335] oom_reaper: reaped process 19841 (perl), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB Nov 11 00:33:49 localhost systemd[1]: fhem.service: Main process exited, code=killed, status=9/KILL Nov 11 00:33:58 localhost systemd[1]: fhem.service: Failed with result 'signal'. Nov 11 00:33:59 localhost systemd[1]: fhem.service: Service RestartSec=100ms expired, scheduling restart. Nov 11 00:33:59 localhost systemd[1]: fhem.service: Scheduled restart job, restart counter is at 9. Nov 11 00:33:59 localhost systemd[1]: Stopped FHEM Home Automation. Nov 11 00:33:59 localhost systemd[1]: Starting FHEM Home Automation... Nov 11 00:34:00 localhost systemd[1]: Started FHEM Home Automation. Nov 11 00:34:29 localhost hmland[604]: usb-transfer took more than 100ms (134ms), this may lead to timing problems! Nov 11 00:34:38 localhost hmland[604]: usb-transfer took more than 100ms (131ms), this may lead to timing problems! Nov 11 00:35:01 localhost CRON[10325]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1) Nov 11 04:17:35 localhost fake-hwclock[235]: Current system time: 2020-11-11 03:17:28 Nov 11 04:17:35 localhost fake-hwclock[235]: fake-hwclock saved clock information is in the past: 2020-11-01 13:48:10 Nov 11 04:17:35 localhost fake-hwclock[235]: To set system time to this saved clock anyway, use "force" Nov 11 04:17:35 localhost systemd-remount-fs[245]: mount: /etc/fstab: parse error at line 3 -- ignoredFhem shout can be the problem i will post it in the Fhem Forum
-
Hi,
no i can't live without this, then over fhem i use my Home Automatic, it must run ever
-
Now, i have for 4 Days no Problem, and then today is the problem back, i don't no whats that....
Laut syslog müßte hier der Abstürzt gekommen sein
Nov 5 11:45:02 localhost CRON[5051]: (root) CMD (/usr/lib/armbian/armbian-truncate-logs) Nov 5 11:48:35 localhost rngd[464]: stats: bits received from HRNG source: 2840064 Nov 5 11:48:35 localhost rngd[464]: stats: bits sent to kernel pool: 2792288 Nov 5 11:48:35 localhost rngd[464]: stats: entropy added to kernel pool: 2792288 Nov 5 11:48:35 localhost rngd[464]: stats: FIPS 140-2 successes: 142 Nov 5 11:48:35 localhost rngd[464]: stats: FIPS 140-2 failures: 0 Nov 5 11:48:35 localhost rngd[464]: stats: FIPS 140-2(2001-10-10) Monobit: 0 Nov 5 11:48:35 localhost rngd[464]: stats: FIPS 140-2(2001-10-10) Poker: 0 Nov 5 11:48:35 localhost rngd[464]: stats: FIPS 140-2(2001-10-10) Runs: 0 Nov 5 11:48:35 localhost rngd[464]: stats: FIPS 140-2(2001-10-10) Long run: 0 Nov 5 11:48:35 localhost rngd[464]: stats: FIPS 140-2(2001-10-10) Continuous run: 0 Nov 5 11:48:35 localhost rngd[464]: stats: HRNG source speed: (min=71.436; avg=109.711; max=190.735)Mibits/s Nov 5 11:48:35 localhost rngd[464]: stats: FIPS tests speed: (min=955.400; avg=6361.504; max=11003.521)Kibits/s Nov 5 11:48:35 localhost rngd[464]: stats: Lowest ready-buffers level: 2 Nov 5 11:48:35 localhost rngd[464]: stats: Entropy starvations: 0 Nov 5 11:48:35 localhost rngd[464]: stats: Time spent starving for entropy: (min=0; avg=0.000; max=0)us Nov 5 11:55:01 localhost CRON[6705]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)In message ist der letzte eintrag deutlich früher
Nov 5 06:01:02 localhost kernel: [313958.471867] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/system.slice/fhem.service,task=perl,pid=14478,uid=1000 Nov 5 06:01:03 localhost kernel: [313959.142637] oom_reaper: reaped process 14478 (perl), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB -
Going Down is farther a problem.
systemctl stop armbian-ramlog.service systemctl disable armbian-ramlog.service systemctl stop armbian-zram-config.service systemctl disable armbian-zram-config.servicedont't the solution for me....
The logs shows now this
Syslog, at 08:21 AM the Log shows a lot of Massages,, because of the Message Log ist this the time of the restart.
Spoilerdmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.8.16-sunxi (root@xeon) (arm-none-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #20.08.14 SMP Tue Oct 20 22:15:32 CEST 2020 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=50c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Cubietech Cubietruck [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x4a000000, size 96 MiB [ 0.000000] OF: reserved mem: initialized node default-pool, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfcfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfcfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfcfffff] [ 0.000000] On node 0 totalpages: 523520 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 326912 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 20 pages/cpu s50444 r8192 d23284 u81920 [ 0.000000] pcpu-alloc: s50444 r8192 d23284 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521792 [ 0.000000] Kernel command line: root=UUID=19cf2f1d-1a31-4890-bc04-a2f1c4e4e021 rootwait rootfstype=ext4 console=ttyS0,115200 console=tty1 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=ba110a34-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] allocated 2098176 bytes of page_ext [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 1948168K/2094080K available (9216K kernel code, 1028K rwdata, 3240K rodata, 1024K init, 328K bss, 47608K reserved, 98304K cma-reserved, 1307648K highmem) [ 0.000000] random: get_random_u32 called from __kmem_cache_create+0x2f/0x368 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 39966 entries in 79 pages [ 0.000000] ftrace: allocated 79 pages with 5 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000018] Switching to timer-based delay loop, resolution 41ns [ 0.000556] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000894] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns [ 0.001257] Console: colour dummy device 80x30 [ 0.001274] printk: console [tty1] enabled [ 0.001339] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.001352] pid_max: default: 32768 minimum: 301 [ 0.001596] LSM: Security Framework initializing [ 0.001660] Yama: becoming mindful. [ 0.001857] AppArmor: AppArmor initialized [ 0.001948] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001962] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003167] CPU: Testing write buffer coherency: ok [ 0.003620] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004457] Setting up static identity map for 0x40100000 - 0x40100054 [ 0.004617] rcu: Hierarchical SRCU implementation. [ 0.008432] smp: Bringing up secondary CPUs ... [ 0.019352] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.019533] smp: Brought up 1 node, 2 CPUs [ 0.019543] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.019547] CPU: All CPU(s) started in HYP mode. [ 0.019550] CPU: Virtualization extensions available. [ 0.020889] devtmpfs: initialized [ 0.031068] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 0.031577] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.031621] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.035816] xor: measuring software checksum speed [ 0.075368] arm4regs : 1136.000 MB/sec [ 0.115418] 8regs : 791.000 MB/sec [ 0.155472] 32regs : 747.000 MB/sec [ 0.195534] neon : 1150.000 MB/sec [ 0.195538] xor: using function: neon (1150.000 MB/sec) [ 0.195634] pinctrl core: initialized pinctrl subsystem [ 0.196303] thermal_sys: Registered thermal governor 'fair_share' [ 0.196309] thermal_sys: Registered thermal governor 'bang_bang' [ 0.196315] thermal_sys: Registered thermal governor 'step_wise' [ 0.197333] NET: Registered protocol family 16 [ 0.199274] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.199913] audit: initializing netlink subsys (disabled) [ 0.200251] audit: type=2000 audit(0.192:1): state=initialized audit_enabled=0 res=1 [ 0.200900] cpuidle: using governor ladder [ 0.200930] cpuidle: using governor menu [ 0.201502] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.201508] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.228846] cryptd: max_cpu_qlen set to 1000 [ 0.300159] raid6: neonx8 gen() 699 MB/s [ 0.368276] raid6: neonx8 xor() 526 MB/s [ 0.436409] raid6: neonx4 gen() 752 MB/s [ 0.504541] raid6: neonx4 xor() 571 MB/s [ 0.572678] raid6: neonx2 gen() 827 MB/s [ 0.640803] raid6: neonx2 xor() 590 MB/s [ 0.708956] raid6: neonx1 gen() 738 MB/s [ 0.777072] raid6: neonx1 xor() 511 MB/s [ 0.845203] raid6: int32x8 gen() 273 MB/s [ 0.913368] raid6: int32x8 xor() 160 MB/s [ 0.981494] raid6: int32x4 gen() 322 MB/s [ 1.049667] raid6: int32x4 xor() 186 MB/s [ 1.117787] raid6: int32x2 gen() 361 MB/s [ 1.185899] raid6: int32x2 xor() 192 MB/s [ 1.254091] raid6: int32x1 gen() 364 MB/s [ 1.322202] raid6: int32x1 xor() 173 MB/s [ 1.322206] raid6: using algorithm neonx2 gen() 827 MB/s [ 1.322209] raid6: .... xor() 590 MB/s, rmw enabled [ 1.322214] raid6: using neon recovery algorithm [ 1.324241] iommu: Default domain type: Translated [ 1.324699] SCSI subsystem initialized [ 1.325099] libata version 3.00 loaded. [ 1.325368] usbcore: registered new interface driver usbfs [ 1.325429] usbcore: registered new interface driver hub [ 1.325503] usbcore: registered new device driver usb [ 1.325610] mc: Linux media interface: v0.10 [ 1.325643] videodev: Linux video capture interface: v2.00 [ 1.325804] pps_core: LinuxPPS API ver. 1 registered [ 1.325809] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.325826] PTP clock support registered [ 1.326649] Advanced Linux Sound Architecture Driver Initialized. [ 1.327433] NetLabel: Initializing [ 1.327442] NetLabel: domain hash size = 128 [ 1.327445] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.327529] NetLabel: unlabeled traffic allowed by default [ 1.328307] clocksource: Switched to clocksource arch_sys_counter [ 1.434293] VFS: Disk quotas dquot_6.6.0 [ 1.434404] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.435098] AppArmor: AppArmor Filesystem Enabled [ 1.436134] simple-framebuffer bfd00000.framebuffer: framebuffer at 0xbfd00000, 0x300000 bytes, mapped to 0x(ptrval) [ 1.436150] simple-framebuffer bfd00000.framebuffer: format=x8r8g8b8, mode=1024x768x32, linelength=4096 [ 1.437253] Console: switching to colour frame buffer device 128x48 [ 1.451346] simple-framebuffer bfd00000.framebuffer: fb0: simplefb registered! [ 1.460561] NET: Registered protocol family 2 [ 1.461475] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.461531] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.461643] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.461766] TCP: Hash tables configured (established 8192 bind 8192) [ 1.461949] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.462025] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.462365] NET: Registered protocol family 1 [ 1.462889] Trying to unpack rootfs image as initramfs... [ 2.241633] Freeing initrd memory: 9656K [ 2.242422] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 2.242782] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 2.244439] Initialise system trusted keyrings [ 2.244513] Key type blacklist registered [ 2.244852] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 2.250884] zbud: loaded [ 2.252790] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.254038] fuse: init (API version 7.31) [ 2.257492] integrity: Platform Keyring initialized [ 2.375704] Key type asymmetric registered [ 2.375715] Asymmetric key parser 'x509' registered [ 2.375945] bounce: pool size: 64 pages [ 2.376043] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 2.376384] io scheduler mq-deadline registered [ 2.376392] io scheduler kyber registered [ 2.376633] io scheduler bfq registered [ 2.380476] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator [ 2.382498] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 2.395374] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 2.398457] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 2.399049] printk: console [ttyS0] disabled [ 2.399156] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 50, base_baud = 1500000) is a 16550A [ 2.399250] printk: console [ttyS0] enabled [ 2.400473] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 51, base_baud = 1500000) is a 16550A [ 2.400683] serial serial0: tty port ttyS2 registered [ 2.411055] brd: module loaded [ 2.420212] loop: module loaded [ 2.421434] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regulator [ 2.421549] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regulator [ 2.423440] libphy: Fixed MDIO Bus: probed [ 2.424082] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator [ 2.424433] sun7i-dwmac 1c50000.ethernet: IRQ eth_wake_irq not found [ 2.424444] sun7i-dwmac 1c50000.ethernet: IRQ eth_lpi not found [ 2.424574] sun7i-dwmac 1c50000.ethernet: PTP uses main clock [ 2.424585] sun7i-dwmac 1c50000.ethernet: no reset control found [ 2.424619] sun7i-dwmac 1c50000.ethernet: no regulator found [ 2.424972] sun7i-dwmac 1c50000.ethernet: Version ID not available [ 2.424987] sun7i-dwmac 1c50000.ethernet: DWMAC1000 [ 2.424995] sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported [ 2.425004] sun7i-dwmac 1c50000.ethernet: Normal descriptors [ 2.425011] sun7i-dwmac 1c50000.ethernet: Ring mode enabled [ 2.425753] libphy: stmmac: probed [ 2.441010] realtek: module verification failed: signature and/or required key missing - tainting kernel [ 2.450497] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.450531] ehci-platform: EHCI generic platform driver [ 2.451083] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.451109] ohci-platform: OHCI generic platform driver [ 2.452061] usbcore: registered new interface driver usb-storage [ 2.453350] sunxi-rtc 1c20d00.rtc: registered as rtc0 [ 2.453404] sunxi-rtc 1c20d00.rtc: setting system clock to 2020-10-25T08:50:21 UTC (1603615821) [ 2.453606] i2c /dev entries driver [ 2.454931] axp20x-i2c 0-0034: AXP20x variant AXP209 found [ 2.462524] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0 [ 2.471365] ldo1: supplied by regulator-dummy [ 2.471762] ldo2: supplied by regulator-dummy [ 2.472916] ldo3: supplied by regulator-dummy [ 2.473637] ldo4: supplied by regulator-dummy [ 2.473900] ldo5: supplied by regulator-dummy [ 2.474599] dcdc2: supplied by regulator-dummy [ 2.475317] dcdc3: supplied by regulator-dummy [ 2.480538] random: fast init done [ 2.480740] axp20x-i2c 0-0034: Backup (RTC) battery charging is enabled [ 2.480882] axp20x-i2c 0-0034: AXP20X driver loaded [ 2.484940] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 2.485753] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator [ 2.487014] sun4i-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator [ 2.487156] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 2.512822] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB [ 2.516602] ledtrig-cpu: registered to indicate activity on CPUs [ 2.516714] hid: raw HID events driver (C) Jiri Kosina [ 2.516906] usbcore: registered new interface driver usbhid [ 2.516910] usbhid: USB HID core driver [ 2.520564] debugfs: Directory '1c22c00.codec' with parent 'sun4i-codec' already present! [ 2.521977] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok [ 2.525512] Initializing XFRM netlink socket [ 2.526160] NET: Registered protocol family 10 [ 2.562092] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.565293] mmc0: new high speed SDHC card at address e624 [ 2.567115] mmcblk0: mmc0:e624 SU08G 7.40 GiB [ 2.573965] mmcblk0: p1 [ 2.589837] Segment Routing with IPv6 [ 2.589977] NET: Registered protocol family 17 [ 2.590022] NET: Registered protocol family 15 [ 2.590121] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 2.590346] 8021q: 802.1Q VLAN Support v1.8 [ 2.590419] Key type dns_resolver registered [ 2.590909] Registering SWP/SWPB emulation handler [ 2.591315] registered taskstats version 1 [ 2.591325] Loading compiled-in X.509 certificates [ 2.599087] Loaded X.509 cert 'Build time autogenerated kernel key: 1db26793b2098835541128330c1baea0c341ef90' [ 2.599278] zswap: loaded using pool lzo/zbud [ 2.600143] Key type ._fscrypt registered [ 2.600151] Key type .fscrypt registered [ 2.600155] Key type fscrypt-provisioning registered [ 2.606787] Btrfs loaded, crc32c=crc32c-generic [ 2.634898] Key type encrypted registered [ 2.634923] AppArmor: AppArmor sha1 policy hashing enabled [ 2.653439] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regulator [ 2.653553] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regulator [ 2.708352] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 2.708398] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled [ 2.708430] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 2.708445] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc [ 2.709596] scsi host0: ahci-sunxi [ 2.710072] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 37 [ 2.722095] of_cfs_init [ 2.722274] of_cfs_init: OK [ 2.722488] ALSA device list: [ 2.722498] #0: sun4i-codec [ 3.022785] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.024769] ata1.00: supports DRM functions and may not be fully accessible [ 3.024783] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133 [ 3.024791] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32) [ 3.025423] ata1.00: supports DRM functions and may not be fully accessible [ 3.025851] ata1.00: configured for UDMA/133 [ 3.026537] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ: 0 ANSI: 5 [ 3.027495] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.028129] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) [ 3.028202] sd 0:0:0:0: [sda] Write Protect is off [ 3.028212] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.028398] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.030394] sda: sda1 [ 3.031846] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.037379] Freeing unused kernel memory: 1024K [ 3.052600] Run /init as init process [ 3.052612] with arguments: [ 3.052617] /init [ 3.052620] with environment: [ 3.052624] HOME=/ [ 3.052628] TERM=linux [ 3.052631] ubootpart=ba110a34-01 [ 3.052635] ubootsource=mmc [ 3.052638] sunxi_ve_mem_reserve=0 [ 3.052642] sunxi_g2d_mem_reserve=0 [ 3.052645] sunxi_fb_mem_reserve=16 [ 3.052649] cgroup_enable=memory [ 3.053170] process '/usr/bin/sh' started with executable stack [ 3.717088] sunxi-mmc 1c12000.mmc: allocated mmc-pwrseq [ 3.740409] sunxi-mmc 1c12000.mmc: initialized, max. request size: 16384 KB [ 3.770573] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 3.772403] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 3.774154] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 3.781212] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 3.798579] mmc1: new high speed SDIO card at address 0001 [ 4.024149] axp20x-gpio axp20x-gpio: DMA mask not set [ 4.041794] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded [ 4.115532] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set [ 6.376038] random: crng init done [ 6.473990] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) [ 7.325073] systemd[1]: Inserted module 'autofs4' [ 7.402450] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.403321] systemd[1]: Detected architecture arm. [ 7.436001] systemd[1]: Set hostname to <cubietruck>. [ 8.629038] systemd[1]: Listening on udev Kernel Socket. [ 8.630732] systemd[1]: Reached target System Time Synchronized. [ 8.631441] systemd[1]: Reached target Swap. [ 8.638161] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 8.639867] systemd[1]: Listening on udev Control Socket. [ 8.641196] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 8.649860] systemd[1]: Listening on Syslog Socket. [ 9.038777] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 9.125259] RPC: Registered named UNIX socket transport module. [ 9.125267] RPC: Registered udp transport module. [ 9.125270] RPC: Registered tcp transport module. [ 9.125273] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 10.875927] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned. [ 10.888531] cedrus 1c0e000.video-codec: Device registered as /dev/video0 [ 11.127410] sun4i-drm display-engine: bound 1e00000.display-frontend (ops 0xc0a97330) [ 11.127551] sun4i-drm display-engine: bound 1e20000.display-frontend (ops 0xc0a97330) [ 11.128041] sun4i-drm display-engine: bound 1e60000.display-backend (ops 0xc0a96b74) [ 11.128554] sun4i-drm display-engine: bound 1e40000.display-backend (ops 0xc0a96b74) [ 11.129344] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 11.129372] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc0a95600) [ 11.130043] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 11.130065] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xc0a95600) [ 11.132744] sun4i-drm display-engine: bound 1c16000.hdmi (ops sun4i_hdmi_ops [sun4i_drm_hdmi]) [ 11.132767] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 11.132779] checking generic (bfd00000 300000) vs hw (0 ffffffff) [ 11.132784] fb0: switching to sun4i-drm-fb from simple [ 11.133449] Console: switching to colour dummy device 80x30 [ 11.134512] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 11.134605] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 11.232700] sun4i-ss 1c15000.crypto-engine: Die ID 0 [ 11.272426] Registered IR keymap rc-empty [ 11.272566] rc rc0: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0 [ 11.297703] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter [ 11.297928] input: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0/input1 [ 11.313429] sunxi-ir 1c21800.ir: initialized sunXi IR driver [ 11.648479] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 11.765253] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.800923] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 [ 11.800998] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 [ 11.801056] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 [ 11.801102] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus [ 11.815956] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.817222] lima 1c40000.gpu: bus rate = 300000000 [ 11.817284] lima 1c40000.gpu: mod rate = 384000000 [ 11.817839] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 11.817851] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 11.818112] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 1 [ 11.834757] axp20x-adc axp20x-adc: DMA mask not set [ 11.995686] asoc-simple-card sound: dit-hifi <-> 1c21000.spdif mapping ok [ 12.005355] ehci-platform 1c14000.usb: EHCI Host Controller [ 12.005396] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 12.021941] ehci-platform 1c14000.usb: irq 33, io mem 0x01c14000 [ 12.036426] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 12.036823] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 12.036833] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.036840] usb usb1: Product: EHCI Host Controller [ 12.036847] usb usb1: Manufacturer: Linux 5.8.16-sunxi ehci_hcd [ 12.036853] usb usb1: SerialNumber: 1c14000.usb [ 12.037783] hub 1-0:1.0: USB hub found [ 12.037886] hub 1-0:1.0: 1 port detected [ 12.039556] ehci-platform 1c1c000.usb: EHCI Host Controller [ 12.039631] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 12.050525] ehci-platform 1c1c000.usb: irq 38, io mem 0x01c1c000 [ 12.064491] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 12.064906] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 12.064918] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.064926] usb usb2: Product: EHCI Host Controller [ 12.064933] usb usb2: Manufacturer: Linux 5.8.16-sunxi ehci_hcd [ 12.064940] usb usb2: SerialNumber: 1c1c000.usb [ 12.065923] hub 2-0:1.0: USB hub found [ 12.066011] hub 2-0:1.0: 1 port detected [ 12.067577] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 12.067983] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 12.068776] ohci-platform 1c14400.usb: irq 34, io mem 0x01c14400 [ 12.119472] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 [ 12.132818] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 [ 12.132833] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.132840] usb usb3: Product: Generic Platform OHCI controller [ 12.132847] usb usb3: Manufacturer: Linux 5.8.16-sunxi ohci_hcd [ 12.132854] usb usb3: SerialNumber: 1c14400.usb [ 12.134319] hub 3-0:1.0: USB hub found [ 12.134422] hub 3-0:1.0: 1 port detected [ 12.135854] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 12.135894] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 12.136197] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43362-sdio.cubietech,cubietruck.txt failed with error -2 [ 12.136209] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43362-sdio.cubietech,cubietruck.txt [ 12.142502] ohci-platform 1c1c400.usb: irq 39, io mem 0x01c1c400 [ 12.216932] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08 [ 12.216947] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.216954] usb usb4: Product: Generic Platform OHCI controller [ 12.216962] usb usb4: Manufacturer: Linux 5.8.16-sunxi ohci_hcd [ 12.216968] usb usb4: SerialNumber: 1c1c400.usb [ 12.220581] hub 4-0:1.0: USB hub found [ 12.220683] hub 4-0:1.0: 1 port detected [ 12.222900] usb_phy_generic usb_phy_generic.0.auto: supply vcc not found, using dummy regulator [ 12.224509] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 12.224549] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5 [ 12.224718] phy id_det change to device [ 12.236800] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08 [ 12.236814] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.236822] usb usb5: Product: MUSB HDRC host driver [ 12.236829] usb usb5: Manufacturer: Linux 5.8.16-sunxi musb-hcd [ 12.236835] usb usb5: SerialNumber: musb-hdrc.1.auto [ 12.237797] hub 5-0:1.0: USB hub found [ 12.237876] hub 5-0:1.0: 1 port detected [ 12.242381] Bluetooth: Core ver 2.22 [ 12.242544] NET: Registered protocol family 31 [ 12.242550] Bluetooth: HCI device and connection manager initialized [ 12.242577] Bluetooth: HCI socket layer initialized [ 12.242588] Bluetooth: L2CAP socket layer initialized [ 12.242620] Bluetooth: SCO socket layer initialized [ 12.350395] Bluetooth: HCI UART driver ver 2.3 [ 12.350409] Bluetooth: HCI UART protocol H4 registered [ 12.350413] Bluetooth: HCI UART protocol BCSP registered [ 12.350500] Bluetooth: HCI UART protocol LL registered [ 12.350506] Bluetooth: HCI UART protocol ATH3K registered [ 12.350556] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 12.350892] Bluetooth: HCI UART protocol Broadcom registered [ 12.351240] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 12.351402] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 12.402228] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 12.545375] cfg80211: failed to load regulatory.db [ 12.557611] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11 [ 12.557626] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 12.557633] usb 2-1: Product: USB 2.0 Hub [ 12.558761] hub 2-1:1.0: USB hub found [ 12.558999] hub 2-1:1.0: 4 ports detected [ 12.708428] usb 3-1: new full-speed USB device number 2 using ohci-platform [ 12.725639] Bluetooth: hci0: BCM: chip id 63 [ 12.728259] Bluetooth: hci0: BCM: features 0x07 [ 12.737401] systemd[1]: Found device /dev/ttyS0. [ 12.752860] Bluetooth: hci0: BCM20702A [ 12.752885] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 12.855159] Bluetooth: hci0: BCM: firmware Patch file not found, tried: [ 12.855170] Bluetooth: hci0: BCM: 'brcm/BCM20702A1.hcd' [ 12.855174] Bluetooth: hci0: BCM: 'brcm/BCM.hcd' [ 12.946662] usb 3-1: New USB device found, idVendor=0403, idProduct=6001, bcdDevice= 6.00 [ 12.946683] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 12.946698] usb 3-1: Product: FT232R USB UART [ 12.946713] usb 3-1: Manufacturer: FTDI [ 12.946727] usb 3-1: SerialNumber: A7031FBC [ 12.964402] usb 2-1.2: new full-speed USB device number 3 using ehci-platform [ 12.978834] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 [ 12.981226] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available [ 12.981928] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d [ 13.102663] usbcore: registered new interface driver usbserial_generic [ 13.102724] usbserial: USB Serial support registered for generic [ 13.143230] usbcore: registered new interface driver ftdi_sio [ 13.143309] usbserial: USB Serial support registered for FTDI USB Serial Device [ 13.143676] ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected [ 13.143879] usb 3-1: Detected FT232RL [ 13.156237] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 13.199247] usb 2-1.2: New USB device found, idVendor=03eb, idProduct=204b, bcdDevice= 0.00 [ 13.199262] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 13.199269] usb 2-1.2: Product: CUL433 [ 13.199276] usb 2-1.2: Manufacturer: busware.de [ 13.224111] systemd[1]: Found device Samsung_SSD_840_EVO_120GB 1. [ 13.420619] usb 2-1.4: new full-speed USB device number 4 using ehci-platform [ 13.579819] systemd[1]: Reached target Bluetooth. [ 13.581276] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 13.581923] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 13.582271] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 13.582687] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 13.583437] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 13.593031] systemd[1]: Mounting /media/Platte... [ 13.604560] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 13.657025] usb 2-1.4: New USB device found, idVendor=1b1f, idProduct=c00f, bcdDevice= 9.67 [ 13.657042] usb 2-1.4: New USB device strings: Mfr=4, Product=14, SerialNumber=36 [ 13.657050] usb 2-1.4: Product: HM-CFG-USB [ 13.657056] usb 2-1.4: Manufacturer: eQ-3 [ 13.657063] usb 2-1.4: SerialNumber: MEQ0232057 [ 13.670576] hid-generic 0003:1B1F:C00F.0001: hiddev0,hidraw0: USB HID v1.10 Device [eQ-3 HM-CFG-USB] on usb-1c1c000.usb-1.4/input0 [ 13.767206] cdc_acm 2-1.2:1.0: ttyACM0: USB ACM device [ 13.769828] usbcore: registered new interface driver cdc_acm [ 13.769837] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 14.131959] EXT4-fs (sda1): recovery complete [ 14.170297] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 14.673749] zram: Added device: zram0 [ 14.679615] zram: Added device: zram1 [ 14.681260] zram: Added device: zram2 [ 14.826848] zram1: detected capacity change from 0 to 1053261824 [ 15.160685] Adding 1028572k swap on /dev/zram1. Priority:5 extents:1 across:1028572k SSFS [ 15.400055] zram0: detected capacity change from 0 to 52428800 [ 15.734235] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard [ 15.734298] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff) [ 18.720742] systemd[1]: systemd-rfkill.service: Succeeded. [ 21.260850] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 21.303781] systemd[1]: Started Armbian memory supported logging. [ 21.314614] systemd[1]: Starting Journal Service... [ 21.747242] systemd[1]: Started Journal Service. [ 21.857114] systemd-journald[525]: Received request to flush runtime journal from PID 1 [ 28.444219] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL) [ 28.447561] sun7i-dwmac 1c50000.ethernet eth0: No Safety Features support found [ 28.447581] sun7i-dwmac 1c50000.ethernet eth0: RX IPC Checksum Offload disabled [ 28.447595] sun7i-dwmac 1c50000.ethernet eth0: No MAC Management Counters available [ 28.447606] sun7i-dwmac 1c50000.ethernet eth0: PTP not supported by HW [ 28.447626] sun7i-dwmac 1c50000.ethernet eth0: configuring for phy/rgmii link mode [ 31.368606] ieee80211 phy0: brcmf_p2p_create_p2pdev: timeout occurred [ 31.368634] ieee80211 phy0: brcmf_cfg80211_add_iface: add iface p2p-dev-wlan0 type 10 failed: err=-5 [ 32.553239] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 32.553290] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 33.768376] vcc3v0: disabling [ 33.768421] vcc5v0: disabling [ 33.768463] usb0-vbus: disabling
The message Log shows the last Log at last day on a similar time
Oct 31 07:19:51 localhost kernel: [52463.375652] [ 32674] 1000 32674 456658 441358 1826816 0 0 perl Oct 31 07:19:51 localhost kernel: [52463.375661] oom-kill:constraint=CONSTRAINT_NONE,nodemask=(null),cpuset=/,mems_allowed=0,global_oom,task_memcg=/system.slice/fhem.service,task=perl,pid=864,uid=1000 Oct 31 07:19:53 localhost kernel: [52464.140558] oom_reaper: reaped process 864 (perl), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB Nov 1 08:21:12 localhost kernel: [ 0.000000] Booting Linux on physical CPU 0x0 Nov 1 08:21:12 localhost kernel: [ 0.000000] Linux version 5.8.16-sunxi (root@xeon) (arm-none-linux-gnueabihf-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #20.08.14 SMP Tue Oct 20 22:15:32 CEST 2020 Nov 1 08:21:12 localhost kernel: [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=50c5387d Nov 1 08:21:12 localhost kernel: [ 0.000000] CPU: div instructions available: patching division code Nov 1 08:21:12 localhost kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Nov 1 08:21:12 localhost kernel: [ 0.000000] OF: fdt: Machine model: Cubietech Cubietruck Nov 1 08:21:12 localhost kernel: [ 0.000000] Memory policy: Data cache writealloc Nov 1 08:21:12 localhost kernel: [ 0.000000] Reserved memory: created CMA memory pool at 0x4a000000, size 96 MiB Nov 1 08:21:12 localhost kernel: [ 0.000000] OF: reserved mem: initialized node default-pool, compatible id shared-dma-pool Nov 1 08:21:12 localhost kernel: [ 0.000000] Zone ranges:I don't know what i can do.....
Can i make a rollback in armbian?
Cubitruck upgrade from Buster to Bookworm
in Beginners
Posted
Thank you, that was the Problem, now the update run finde and after the reboot everything looks good.