Jump to content

pista

Members
  • Posts

    24
  • Joined

  • Last visited

Everything posted by pista

  1. @jock Ok, got it. Yes, the issue with S905 where ROM is using sector 0 of eMMC doesn't affect SD booting. It is a problem only when you are trying to boot from eMMC.
  2. @jock @hexdump So, it didn't work for me. I've inserted both primary and backup GPT at the end of the eMMC: # xxd -a -g 0 emmc_gpt.bin 00000000: 00000000000000000000000000000000 ................ ----------------- * MBR 000001c0: 0200ee27e9be01000000ffdfea000000 ...'............ 000001d0: 00000000000000000000000000000000 ................ 000001e0: 00000000000000000000000000000000 ................ 000001f0: 000000000000000000000000000055aa ..............U. ----------------- 00000200: 4546492050415254000001005c000000 EFI PART....\... ----------------- 00000210: cc7a5ba1000000000100000000000000 .z[............. PRIMARY HEADER 00000220: ffdfea00000000002200000000000000 ........"....... 00000230: dedfea0000000000f0aa3b318995fc43 ..........;1...C 00000240: 9a17bc786b4c16fe0200000000000000 ...xkL.......... 00000250: 8000000080000000b6d57abf00000000 ..........z..... 00000260: 00000000000000000000000000000000 ................ * ----------------- 00000400: af3dc60f838472478e793d69d8477de4 .=....rG.y=i.G}. ----------------- 00000410: 596f0b4087be074b856fc934c732f8e6 Yo.@...K.o.4.2.. PRIMARY ENTRIES 00000420: 00a02b0000000000ffdf310000000000 ..+.......1..... 00000430: 00000000000000004c0069006e007500 ........L.i.n.u. 00000440: 78002000660069006c00650073007900 x. .f.i.l.e.s.y. 00000450: 7300740065006d000000000000000000 s.t.e.m......... 00000460: 00000000000000000000000000000000 ................ 00000470: 00000000000000000000000000000000 ................ 00000480: af3dc60f838472478e793d69d8477de4 .=....rG.y=i.G}. 00000490: 23c888f98a92884c93efa31ce6df24a9 #......L......$. 000004a0: 00e0310000000000dedfea0000000000 ..1............. 000004b0: 00000000000000004c0069006e007500 ........L.i.n.u. 000004c0: 78002000660069006c00650073007900 x. .f.i.l.e.s.y. 000004d0: 7300740065006d000000000000000000 s.t.e.m......... 000004e0: 00000000000000000000000000000000 ................ * ----------------- 00004400: af3dc60f838472478e793d69d8477de4 .=....rG.y=i.G}. ----------------- 00004410: 596f0b4087be074b856fc934c732f8e6 Yo.@...K.o.4.2.. BACKUP ENTRIES 00004420: 00a02b0000000000ffdf310000000000 ..+.......1..... 00004430: 00000000000000004c0069006e007500 ........L.i.n.u. 00004440: 78002000660069006c00650073007900 x. .f.i.l.e.s.y. 00004450: 7300740065006d000000000000000000 s.t.e.m......... 00004460: 00000000000000000000000000000000 ................ 00004470: 00000000000000000000000000000000 ................ 00004480: af3dc60f838472478e793d69d8477de4 .=....rG.y=i.G}. 00004490: 23c888f98a92884c93efa31ce6df24a9 #......L......$. 000044a0: 00e0310000000000dedfea0000000000 ..1............. 000044b0: 00000000000000004c0069006e007500 ........L.i.n.u. 000044c0: 78002000660069006c00650073007900 x. .f.i.l.e.s.y. 000044d0: 7300740065006d000000000000000000 s.t.e.m......... 000044e0: 00000000000000000000000000000000 ................ * ----------------- 00008400: 4546492050415254000001005c000000 EFI PART....\... ----------------- 00008410: e68b23ae00000000ffdfea0000000000 ..#............. BACKUP HEADER 00008420: 01000000000000002200000000000000 ........"....... 00008430: dedfea0000000000f0aa3b318995fc43 ..........;1...C 00008440: 9a17bc786b4c16fedfdfea0000000000 ...xkL.......... 00008450: 8000000080000000b6d57abf00000000 ..........z..... 00008460: 00000000000000000000000000000000 ................ * 000085f0: 00000000000000000000000000000000 ................ ----------------- and set CONFIG_EFI_PARTITION_ENTRIES_OFF to the offset of the Primary Entries. In mainline u-boot I tested: => mmc dev 2 switch to partitions #0, OK mmc2(part 0) is current device => mmc part ## Unknown partition table type 0 => part list mmc 2 ## Unknown partition table type 0 => gpt verify mmc 2 No partition list provided - only basic check GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 gpt_verify_headers: *** ERROR: Invalid GPT *** Verify GPT: error! => gpt guid mmc 2 GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 find_valid_gpt: *** ERROR: Invalid GPT *** find_valid_gpt: *** Using Backup GPT *** 313baaf0-9589-43fc-9a17-bc786b4c16fe success! Note, that the last command reads the GUID from the Backup GPT, but none of the other commands work. I have to say, I'm puzzled by the GPT implementation in u-boot. I would have expected it to work the same as linux kernel - with kernel cmd line Linux uses the backup GPT wo problems. It looks like if u-boot can't find a valid Primary GPT, it doesn't use the Backup even it is aware of it. So, without having u-boot working with only the Backup GPT I can't even attempt to replace the AML u-boot with mainline. This is because the boot ROM is looking for the boot loader in sector 0, so no regular GPT (or MBR) can be created. @jock are you saying that you didn't have this problem regarding both ROM and part. table using the same location on the disk?
  3. @jock This is a good find! Kernel (using 'gpt' cmd line param) is happy with a backup GPT table at the end of the eMMC. So, this could be a solution for u-boot. Still the problem is the Amlogic u-boot which AFAIK doesn't have gpt support, so would need to re-build it, and then somehow properly reinstall. Probably easier would be then just replace it with the mainline u-boot. But I'll give it a try... see if can get at least the chainloaded u-boot recognize the GPT.
  4. @hexdump No errors, just info that no valid part table found: U-Boot 2020.07-dirty (Oct 18 2021 - 02:27:09 +0200) hexdump-gxbb ... => mmc dev 2 switch to partitions #0, OK mmc2(part 0) is current device => mmc part ## Unknown partition table type 0 The 'gpt verify' fails too: => gpt verify mmc 2 No partition list provided - only basic check GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 gpt_verify_headers: *** ERROR: Invalid GPT *** Verify GPT: error! Observe gpt_verify_headers: int gpt_verify_headers(struct blk_desc *dev_desc, gpt_header *gpt_head, gpt_entry **gpt_pte) { /* * This function validates AND * fills in the GPT header and PTE */ if (is_gpt_valid(dev_desc, GPT_PRIMARY_PARTITION_TABLE_LBA, gpt_head, gpt_pte) != 1) { printf("%s: *** ERROR: Invalid GPT ***\n", // <-- this is the error I got __func__); return -1; } /* Free pte before allocating again */ free(*gpt_pte); if (is_gpt_valid(dev_desc, (dev_desc->lba - 1), // <-- Here it is checking the Backup GPT header gpt_head, gpt_pte) != 1) { printf("%s: *** ERROR: Invalid Backup GPT ***\n", __func__); return -1; } return 0; } So, this method doesn't even check the Backup GPT header if Primary is invalid (or missing in my case). I think as-is u-boot won't work with only the Backup GPT present. Sure, it could be patched, but this would require more coding then I'm willing to do. I do coding for living, and this exercise to get Armbian running from eMMC was kind of a distraction from work lol. Let's say I get this part working, then I would need to recompile/patch the original AML u-boot too - if I'm going to stick with the 'chainloading' design. The hard part would be integrate the recompiled AML u-boot into the original firmware, so I can burn it. The other option would be just try and use the mainline u-boot (no chainloading). Would be an interesting project, but a long shot. I think I'm just going to use the 'mmc read' method. Maybe I'll get back to this in future. Thanks for you assistance, I've enjoyed working with you.
  5. @hexdump i've enabled GPT in mailine u-boot,and I got 'gpt' command now, but it still doesn't see the partition: U-Boot 2020.07-dirty (Oct 18 2021 - 02:27:09 +0200) hexdump-gxbb ... => mmc dev 2 switch to partitions #0, OK mmc2(part 0) is current device => mmc part ## Unknown partition table type 0 The 'gpt verify' fails too: => gpt verify mmc 2 No partition list provided - only basic check GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645 gpt_verify_headers: *** ERROR: Invalid GPT *** Verify GPT: error! I've checked the source code, and as far as I can tell, u-boot is only checking the primary GPT: int gpt_verify_headers(struct blk_desc *dev_desc, gpt_header *gpt_head, gpt_entry **gpt_pte) { /* * This function validates AND * fills in the GPT header and PTE */ if (is_gpt_valid(dev_desc, GPT_PRIMARY_PARTITION_TABLE_LBA, gpt_head, gpt_pte) != 1) { printf("%s: *** ERROR: Invalid GPT ***\n", __func__); return -1; } ... I couldn't even find definition for the backup GPT. Strange that it is working for you.
  6. @hexdump thanks for the resources. Rebuilding the mainline uboot is not a problem, I already did it once using your instructions in the readme. But I'm not sure I will be able to rebuild the original AML uboot - which would need to have GPT support too.
  7. @hexdump I've tested today the GPT scenario. I created a file, partitioned with 'gdisk', then I extracted the backup GPT records (last 33 LBA) and inserted at the end of the eMMC. After I rebooted linux recognized the 2 new partitions (/dev/mmcblk1p1 and p2). I created FAT on p1 and put a file there. Neither the AML uboot, nor the mainline uboot recognized the partition table. E.g.: on mailnine uboot: // EMMC: => mmc list mmc@70000: 0 mmc@72000: 1 (SD) mmc@74000: 2 (eMMC) => fatls mmc 2:1 ** No partition table - mmc 2 ** // SD works... => fatls mmc 1:1 dtb/ extlinux/ 709 aml_autoscript 0 aml_autoscript.zip 1536 armbian_first_run.txt.template 38518 boot.bmp 158 boot.ini 216810 config-5.9.0-arm-64 174 emmc_autoscript 9842151 initrd.img-5.9.0-arm-64 537 s905_autoscript 5794743 system.map-5.9.0-arm-64 609247 u-boot-s905 740080 u-boot-s905x2-s922 650183 u-boot-s905x-s912 9842215 uinitrd 28078592 zimage lost.dir/ android/ 521171 u-boot.ext .android_secure/ 0 .wipe_record 17 file(s), 5 dir(s) For you chromebook, did you compile uboot with some extra options enabled to get GPT backup working?
  8. @usual user thanks, that is an interesting article you linked.
  9. @usual user I run the test: [1] eMMC before change: # xxd -a -g 1 -l 512 /dev/mmcblk1 00000000: 1a e6 31 39 74 02 1f 27 93 be e3 cd 29 12 1b 71 ..19t..'....)..q 00000010: 40 41 4d 4c f0 bf 00 00 40 00 01 00 00 00 00 00 @AML....@....... 00000020: 00 00 00 00 40 00 00 00 00 02 00 00 60 00 00 00 ....@.......`... 00000030: 00 00 00 00 40 02 00 00 b0 0d 00 00 90 bf 00 00 ....@........... 00000040: 00 00 00 00 f0 0f 00 00 00 b0 00 00 00 00 00 00 ................ 00000050: fe 26 6e ba 84 e6 69 fc 6b 79 97 2c 0c 8a b3 15 .&n...i.ky.,.... 00000060: 13 70 39 86 a3 e4 b1 78 22 b4 9b b3 cf 65 88 9c .p9....x"....e.. 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ * 000001f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [2] write 0x55 0xaa to the last 2 bytes of 1st sector: echo -n -e '\x55\xaa' | dd if=/dev/stdin of=/dev/mmcblk1 bs=1 seek=$((512-2)) count=2 conv=notrunc [3] eMMC after change: # xxd -a -g 1 -l 512 /dev/mmcblk1 00000000: 1a e6 31 39 74 02 1f 27 93 be e3 cd 29 12 1b 71 ..19t..'....)..q 00000010: 40 41 4d 4c f0 bf 00 00 40 00 01 00 00 00 00 00 @AML....@....... 00000020: 00 00 00 00 40 00 00 00 00 02 00 00 60 00 00 00 ....@.......`... 00000030: 00 00 00 00 40 02 00 00 b0 0d 00 00 90 bf 00 00 ....@........... 00000040: 00 00 00 00 f0 0f 00 00 00 b0 00 00 00 00 00 00 ................ 00000050: fe 26 6e ba 84 e6 69 fc 6b 79 97 2c 0c 8a b3 15 .&n...i.ky.,.... 00000060: 13 70 39 86 a3 e4 b1 78 22 b4 9b b3 cf 65 88 9c .p9....x"....e.. 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ * 000001f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa ..............U. [4] serial terminal: ~$ sudo -i root@buffy:~# stty -F /dev/ttyUSB0 cs8 -parenb cstopb crtscts root@buffy:~# picocom -b 115200 -d 8 -y n -p 1 -f n /dev/ttyUSB0 [5] reboot, and the serial shows: GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0; EMMC:0;READ:0;CHK:17A;SD:0;READ:0;CHK:F3;USB:8;LOOP:1; EMMC:0;READ:0;CHK:17A;SD:0;READ:0;CHK:F3;USB:8;LOOP:2; EMMC:0;READ:0;CHK:17A;SD:0;READ:0;CHK:F3;USB:8;LOOP:3; EMMC:0;READ:0;CHK:17A;SD:0;READ:0;CHK:F3;USB:8;LOOP:4; EMMC:0;READ:0;CHK:17A;SD:0;READ:0;CHK:F3;USB:8;...
  10. @usual user > AFAIS you have inserted a populated partition table. Yes, that was my intention. > Maybe the boot firmware now changes the boot flow I doubt it does. AFAIK: the ROM uses secure-boot using 3 pieces BL1 (is in ROM), BL2 (in 1st sector on emmc), and BL3 is the u-boot. BL2 is also signed. With s905 Amlogic doesn't use regular partitions (e.g: 'mmc part' will give you "no partitions found", and 'fatload' etc. commands won't work either). Amlogic does maintain some kind of partition table. Based on the u-boot messages: mmc read lba=0x12000, blocks=0x2 mmc read lba=0x12002, blocks=0x2 mmc_read_partition_tbl: mmc read partition OK! eMMC/TSD partition table have been checked OK! gxb_p200_v1#mmc read 0x1200000 0x12000 0x400 gxb_p200_v1#md.b 0x1200000 0x400 01200000: 4d 50 54 00 30 31 2e 30 30 2e 30 30 00 00 00 00 MPT.01.00.00.... 01200010: 0e 00 00 00 ca 70 f2 de 62 6f 6f 74 6c 6f 61 64 .....p..bootload 01200020: 65 72 00 00 00 00 00 00 00 00 40 00 00 00 00 00 er........@..... 01200030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 01200040: 72 65 73 65 72 76 65 64 00 00 00 00 00 00 00 00 reserved........ 01200050: 00 00 00 04 00 00 00 00 00 00 40 02 00 00 00 00 ..........@..... 01200060: 00 00 00 00 00 00 00 00 63 61 63 68 65 00 00 00 ........cache... 01200070: 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00 00 ........... .... 01200080: 00 00 c0 06 00 00 00 00 02 00 00 00 00 00 00 00 ................ 01200090: 65 6e 76 00 00 00 00 00 00 00 00 00 00 00 00 00 env............. 012000a0: 00 00 80 00 00 00 00 00 00 00 40 27 00 00 00 00 ..........@'.... 012000b0: 00 00 00 00 00 00 00 00 6c 6f 67 6f 00 00 00 00 ........logo.... 012000c0: 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 00 ................ 012000d0: 00 00 40 28 00 00 00 00 01 00 00 00 00 00 00 00 ..@(............ 012000e0: 72 65 63 6f 76 65 72 79 00 00 00 00 00 00 00 00 recovery........ 012000f0: 00 00 00 02 00 00 00 00 00 00 c0 2a 00 00 00 00 ...........*.... ... Amlogic made modifications to u-boot (they even have their own commands 'amlmmc' to read/write the emmc. So, I don't think they would or could modify the boot flow. > just add the boot signature "55AA" to the last two bytes of the sector OK, I will try.
  11. @hexdump I'm using this one: https://github.com/natinusala/linux-amlogic-toolkit I've tried two others, but only this one worked. (Has the script updated). Yes, I have to ground the emmc clock pin while powering up. You will need to add a line to /etc/udev/rules.d: SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="1b8e", ATTR{idProduct}=="c003", MODE:="0666", SYMLINK+="worldcup". Plugin OTG USB, Short the pin, power-up, remove the short, and lsusb will show a new Amlogic device. 1st time you need to let the tool unpack your firmware, after this just exec the 'flash' script. Here is the last part of the dbg log I still have on my screen: Writing system partition Command -> /home/pista/amlburn/linux-amlogic-toolkit-master/bin/aml-linux-usb-burn/tools/update 2>/dev/null partition system /home/pista/amlburn/linux-amlogic-toolkit-master/output/image/system.PARTITION - Results --------------------------------------------------- [update]sparse format detected file size is 0x3e01502c AmlUsbTplCmd = download store system sparse 0x3e01502c rettemp = 1 buffer = download store system sparse 0x3e01502c AmlUsbReadStatus retusb = 1 Downloading.... [update]Cost time 80Sec [update]Transfer size 0x3e01502cB(992MB) AmlUsbBulkCmd[download get_status] [update]mwrite success ------------------------------------------------------------- [OK] Done
  12. @hexdump Yes, I've learned about this option from your post in an other thread. Also people from the NXP processor forum mentioned this. It was the one option I didn't try. I guess it would be worth... shouldn't be much work and there is no chance to brick again. @TonyMac32 has git of the old Amlogic u-boot, and I see the gpt command does exist in this version, but it is not available on my TV box, so the question is whether GPT support is enabled. I probably try it later today...
  13. @hexdump I didn't touch the bootloader, it is the original from the TV box. I only inserted the 72 bytes at the end of the 1st block (which was originally empty). It seems it is not possible to change the 1st block at all, even if you just modify the empty space. My guess is that when ROM is checking whether emmc has a valid BL it reads the whole 512 bytes (instead of just the length of BL) and does some CRC, or other validation, so even changing a single 00 byte will cause ROM to reject the bootloader. I even tried twice just to make sure I didn't make a mistake, I bricked both times. (Thankfully the Linux version of the AML USB burning tool is working very well). P.S.: yes it didn't start, I got that string from ROM (starting with "BL1" repeating in a loop.
  14. @hexdump @usual user OK, it doesn't work. I bricked the box twice It is strange, because it should work, but doesn't. I've created a file with 2 partitions (boot, root): fallocate -l 200M tst.img fdisk ... // file systems not really needed for this... kpartx -a -v tst.img mkfs.vfat -n BOOT /dev/mapper/loop0p1 mkfs.ext4 /dev/mapper/loop0p2 e2label /dev/mapper/loop0p2 ROOT kpartx -d disk.image xxd -a -g 1 -l 512 tst.img 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ * 000001b0: 00 00 00 00 00 00 00 00 2d bd 6b 1f 00 00 80 8a ........-.k..... 000001c0: 09 82 0b 88 13 b5 00 00 20 00 00 80 0c 00 00 88 ........ ....... 000001d0: 14 b5 83 27 e9 be 00 80 2c 00 00 60 be 00 00 00 ...'....,..`.... 000001e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 000001f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa ..............U. // extract last 72 bytes of the 1 sector dd if=tst.img of=tbl.img bs=1 skip=440 count=72 xxd -a -g 1 tbl.img 00000000: 2d bd 6b 1f 00 00 80 8a 09 82 0b 88 13 b5 00 00 -.k............. 00000010: 20 00 00 80 0c 00 00 88 14 b5 83 27 e9 be 00 80 ..........'.... 00000020: 2c 00 00 60 be 00 00 00 00 00 00 00 00 00 00 00 ,..`............ 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000040: 00 00 00 00 00 00 55 aa ......U. // write to the end of the 1st sector on eMMC dd if=tbl.img of=/dev/mmcblk1 bs=1 seek=440 count=72 conv=notrunc xxd -a -g 1 -l 512 /dev/mmcblk1 00000000: 1a e6 31 39 74 02 1f 27 93 be e3 cd 29 12 1b 71 ..19t..'....)..q 00000010: 40 41 4d 4c f0 bf 00 00 40 00 01 00 00 00 00 00 @AML....@....... 00000020: 00 00 00 00 40 00 00 00 00 02 00 00 60 00 00 00 ....@.......`... 00000030: 00 00 00 00 40 02 00 00 b0 0d 00 00 90 bf 00 00 ....@........... 00000040: 00 00 00 00 f0 0f 00 00 00 b0 00 00 00 00 00 00 ................ 00000050: fe 26 6e ba 84 e6 69 fc 6b 79 97 2c 0c 8a b3 15 .&n...i.ky.,.... 00000060: 13 70 39 86 a3 e4 b1 78 22 b4 9b b3 cf 65 88 9c .p9....x"....e.. 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ * 000001b0: 00 00 00 00 00 00 00 00 2d bd 6b 1f 00 00 80 8a ........-.k..... 000001c0: 09 82 0b 88 13 b5 00 00 20 00 00 80 0c 00 00 88 ........ ....... 000001d0: 14 b5 83 27 e9 be 00 80 2c 00 00 60 be 00 00 00 ...'....,..`.... 000001e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 000001f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa ..............U. Hex dump shows BL2 is still intact, and tbl.img has been written to a place which was originally empty. So, unless I'm missing something it looks like ROM is doing some extra checking that the 1st sector has not been tampered with, or something. Well, it was a nice idea. I guess I use my method, it is more complex, but it works.
  15. @usual user Thank you for the info!
  16. @hexdump I'm now intrigued... I was about to put the PCB back to the box, but I think I will do some experiments over the weekend. I do see that eMMC has BL2 (or is it BL3) at the beginning of the 1st block - total 111 bytes. Then nothing until 4096: root@arm-64:~# hexdump -C -n $((4096+64)) /dev/mmcblk1 00000000 1a e6 31 39 74 02 1f 27 93 be e3 cd 29 12 1b 71 |..19t..'....)..q| 00000010 40 41 4d 4c f0 bf 00 00 40 00 01 00 00 00 00 00 |@AML....@.......| 00000020 00 00 00 00 40 00 00 00 00 02 00 00 60 00 00 00 |....@.......`...| 00000030 00 00 00 00 40 02 00 00 b0 0d 00 00 90 bf 00 00 |....@...........| 00000040 00 00 00 00 f0 0f 00 00 00 b0 00 00 00 00 00 00 |................| 00000050 fe 26 6e ba 84 e6 69 fc 6b 79 97 2c 0c 8a b3 15 |.&n...i.ky.,....| 00000060 13 70 39 86 a3 e4 b1 78 22 b4 9b b3 cf 65 88 9c |.p9....x"....e..| 00000070 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 00001000 02 00 00 14 08 b2 00 d9 f4 03 00 aa f5 03 01 aa |................| 00001010 a0 00 38 d5 11 22 00 94 a0 02 00 b4 20 bf 04 10 |..8.."...... ...| 00001020 00 c0 18 d5 00 10 38 d5 00 00 74 b2 00 10 18 d5 |......8...t.....| 00001030 df 3f 03 d5 e0 01 00 58 01 02 00 58 6c 22 00 94 |.?.....X...Xl"..| 00001040 So... [updated based on info from Mr. usual user] 0 100 200 300 400 500 600 |-----|-----|-----|-----|-----|-----| | | | | 112 (BL2) 440 512 (72 bytes) 0x70 0x1B8 0x1FF It looks like the problem with S905 is not that the part. table overwrites the bootloader, but that the partitioning software (fdisk) wipes the space before the part. table (446 bytes). In theory it should be possible to just create the partitions and then restore the 1st 400 bytes. I think I'll try on mounted disk-image first.
  17. @hexdump sorry, I didn't realize how much time has passed since we talked, lol. It is about Amologix S905. As you know the ROM in this SOC looks for bootloader at the 1st sector of the eMMC, so it is not possible to create regular partitions since the part. table would overwrite the bootloader. The result is that u-boot commands like 'fatload' won't work. Which prevented me from installing Armbian into eMMC. E.g.: the chainloaded u-boot will report: U-Boot 2020.07-dirty (Oct 24 2020 - 21:14:30 +0200) hexdump-gxbb ... switch to partitions #0, OK mmc2 is current device ** No partition table - mmc 2 ** I resolved this by dedicating 2 areas at the end of eMMC: 200MB 'boot', and the rest (~6GB) as 'root'. I exposed these to Linux using kernel command line parameter: 'blkdevparts=mmcblk1:209715200@1463812096(boot),-@1673528320(root)'. In Linux I copied the root directory tree to /dev/mmcblk1p2. I left /dev/mmcblk1p1 (the boot "partition") without file system, and copied (dd) uboot (the mailine uboot), kernel, ramdisk, and dtb there at the predefined block positions, e.g: 'dd if=zImage of=/dev/mmcblk1p2 bs=512 seek=2859008 count=54841'. In Amlogic u-boot instead of fatload I used 'mmc read' to load all files, e.g.: to load the kernel: 'mmc read 0x08080000 0x2BA3FC 0xD639'. In the chainloaded Mainline u-boot I used 'booti 0x08080000 0x13000000 0x08008000' as 'bootcmd' to start the system. With this setup I can now boot from eMMC. Thanks for you assistance; your comments on the subject in various threads on the forum were very helpful.
  18. OK, never mind I found these: CONFIG_ENV_IS_NOWHERE=y # CONFIG_ENV_IS_IN_EEPROM is not set # CONFIG_ENV_IS_IN_FAT is not set # CONFIG_ENV_IS_IN_EXT4 is not set # CONFIG_ENV_IS_IN_FLASH is not set # CONFIG_ENV_IS_IN_MMC is not set # CONFIG_ENV_IS_IN_NAND is not set # CONFIG_ENV_IS_IN_NVRAM is not set # CONFIG_ENV_IS_IN_ONENAND is not set # CONFIG_ENV_IS_IN_REMOTE is not set + "bootenv_addr_r=0x01080000\0" \ + "preboot=usb start; " \ + "mmc dev 1; " \ + "setenv stdin usbkbd; " \ + "for target in 1 2;do " \ + "for prefix in / /boot/;do " \ + "if test -e mmc ${target}:1 ${prefix}uEnv.txt;then " \ + "load mmc ${target}:1 ${bootenv_addr_r} ${prefix}uEnv.txt; " \ + "env import -t ${bootenv_addr_r} ${filesize}; " \ + "fi; " \ + "done; " \ + "done\0" \
  19. Hello @hexdump It took some time but I've managed to install into emmc. Currently I can run manually from the chainloaded u-boot's prompt. I will post a summary, but basically I'm using 'mmc read' instead of 'load/fatload' to load kernel, ramdisk, and dtb. The issue I run into is that in the mainline u-boot I don't have the 'saveenv' command. I've checked the u-boot config, and CONFIG_CMD_SAVEENV=y is defined. Do you by chance know why the command is not available? I've built u-boot using your instructions from https://github.com/hexdump0815/u-boot-misc/blob/master/readme.gxb
  20. Thanks @hexdump! I'll let you know... Pista
  21. Hello @hexdump Just a quick question. Your gxb-u-boot.bin.gz ( from https://github.com/hexdump0815/u-boot-misc/releases/tag/200718-01 ) it should have USB support, right? Does it also have USB storage support? I'm asking because the legacy u-boot recognized the USB storage device and loaded u-boot.ext (your u-boot with USB), but this one reported that no USB storage device found. (I'm trying to boot from a USB drive and have root also on the drive, instead booting from SD and having root in emmc.)
  22. Hello @hexdump Thank you for the reply. Indeed, looks like it couldn't even find dtb: "vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters"; it is interesting I'm even able to boot. As for bricking the box, I already did it a few times and had to short the chip + reinstall Android. This is partly a learning exercise for me, so not a huge deal even if I kill her for good I tested booting from SD, having root FS in emmc, and it works fine. I'll keep experimenting a little more, and then decide whether I go back to kernel 3.14 (which works OK for booting with legacy U-BOOT from emmc), or I use SD with new kernel for booting. Pista
  23. Hello Armbian team. 1st I would like to thank everyone for your great work. I've been using a Minix TV box with Armbian 5.41 (kernel 3.14) for many years. Recently I have decide to try Mr. balbes150 build. The system works perfectly from SD, but after installing to emmc the boot process fails to load OS. I would be thankful if someone could point to the right direction. [1] Hardware: Minix Neo U1 ... S905, 2GB RAM / 16GB Flash. Emmc is Toshiba THGBMFG7C1LBAIL (AFAIK same as Samsung KLMAG2GEND-B031). [2] Software: Armbian_20.10_Arm-64_bullseye_current_5.9.0.img.xz Using DTB meson-gxbb-vega-s95-meta.dtb Here is my extlinux.conf: LABEL Armbian LINUX /zImage INITRD /uInitrd FDT /dtb/amlogic/meson-gxbb-vega-s95-meta.dtb APPEND root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 To install I run the install-aml-s905-emmc.sh. The only change I made is to replace u-boot.ext in /boot on SD, and the one installed in emmc (/dev/mmcblk1p1) with the one from Mr. hexdump which has serial support enabled, so I could capture the u-boot process info. Both versions - the one in distro from Mr. balbes150, and the one from Mr. hexdump are the same but the later has the serial enabled. Both version produce the same error. [3] The problem: Booting from SD has no problems. The process uses the original Amlogic U-Boot "2015". During booting from EMMC the Amlogic U-BOOT correctly transitions to the new U-BOOT "2020", but that one fails to load the rest of the system,. This where I need some help. Here is the serial log og a good boot from SD: Boot from SD: -------------- exit_reason:0x06 set vddee to 0x03e8mv Enter ddr resume pub training time: 2630 ddr resume done store restore gp0 pll cfg15 3b0d000 cfg15 63b0d000 GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0; no sdio debug board detected TE: 71706 BL2 Built : 12:06:06, Jun 13 2016. gxb g176ecdb - laiyin.mo@droid12-sz set vcck to 1100 mv set vddee to 1000 mv Board ID = 1 CPU clk: 1536MHz DDR chl: Rank0+1 same @ 792MHz DDR0: 1024MB(auto)-2T-11 DataBus test pass! AddrBus test pass! -s Load fip header from eMMC, src: 0x0000c000, des: 0x01400000, size: 0x00004000 New fip structure! Load bl30 from eMMC, src: 0x00010000, des: 0x01000000, size: 0x0000d460 Sending bl30......................................................OK. Run bl30... Load bl31 from eMMC, src: 0x00020000, des: 0x1010[0000, size: 0x00013140 Image: gxb_v1.1.3134-b387442 2016-06-16 14:48:44 yun.cai@droid06] OPS=0x13 d4 13 d6 d1 28 0 66 3 d 34 7f 3b [0.15Load bl33 from eMMC, src: 0x00034000, des: 0x01000000, size: 0x0006af00 8213 Inits done] secure task start! high task start! low task start! NOTICE: BL3-1: v1.0(debug):c813a61 NOTICE: BL3-1: Built : 14:47:05, Jun 16 2016 INFO: BL3-1: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader ERROR: Error initializing runtime service opteed_fast INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address = 0x1000000 INFO: BL3-1: Next image spsr = 0x3c9 U-Boot 2015.01-00018-g6c5824b-dirty (Oct 12 2017 - 18:36:33) DRAM: 1 GiB Relocation Offset is: 36f3b000 register usb cfg[1][0] = 0000000037f96ac0 register usb cfg[0][1] = 0000000037f96ae0 register usb cfg[2][0] = 0000000037f96b00 vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters vpu: clk_level = 7 vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300) MMC: SDIO Port C: 0, SDIO Port B: 1 emmc/sd response timeout, cmd8, status=0x3ff2800 emmc/sd response timeout, cmd55, status=0x3ff2800 [mmc_startup] mmc refix success [mmc_init] mmc init success In: serial Out: serial Err: serial reboot_mode=watchdog_reboot hpd_state=1 [1080p60hz] is invalid for cvbs. set hdmitx VIC = 16 config HPLL = 2970 HPLL: 0xc800023d config HPLL done j = 4 vid_clk_div = 1 hdmitx phy setting done hdmitx: set enc for VIC: 16 enc_vpu_bridge_reset[1162] rx version is 1.4 or below div=10 Net: Meson_Ethernet Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** libfdt fdt_check_header(): FDT_ERR_BADMAGIC [OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters [OSD]fb_addr for logo: 0x3d800000 [OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters [OSD]fb_addr for logo: 0x3d800000 [CANVAS]addr=0x3d800000 width=5760, height=2160 Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** There is no valid bmp file at the given address Hit Enter or space or Ctrl+C key to stop autoboot -- : 0 Device: SDIO Port C Manufacturer ID: 11 OEM: 100 Name: 016G7 Tran Speed: 52000000 Rd Block Len: 512 MMC version 5.0 High Capacity: Yes Capacity: 14.7 GiB mmc clock: 40000000 Bus Width: 8-bit DDR reading s905_autoscript 537 bytes read in 2 ms (261.7 KiB/s) ## Executing script at 01020000 start amlogic old u-boot ## Error: "bootfromsd" not defined reading boot_android ** Unable to read file boot_android ** ** Bad device usb 0 ** reading u-boot.ext 609247 bytes read in 11 ms (52.8 MiB/s) ## Starting application at 0x01000000 ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.9.0-arm-64 (root@vbox) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #20.10 SMP PREEMPT Wed Oct 14 12:04:42 MSK 2020 [ 0.000000] Machine model: Tronsmart Vega S95 Pro [ 0.000000] efi: UEFI not found. [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader! [ 0.000000] Reserved memory: created CMA memory pool at 0x000000002b400000, size 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000001000000-0x000000003f934fff] [ 0.000000] NUMA: NODE_DATA [mem 0x3f72b100-0x3f72cfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000001000000-0x000000003f934fff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff] [ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000010200000-0x000000003f934fff] [ 0.000000] Zeroed struct page in unavailable ranges: 203 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000001000000-0x000000003f934fff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 22 pages/cpu s51480 r8192 d30440 u90112 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] CPU features: detected: ARM erratum 843419 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 242832 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 666780K/987348K available (16188K kernel code, 1308K rwdata, 6464K rodata, 3392K init, 927K bss, 58424K reserved, 262144K cma-reserved) [ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x80/0x150 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_meson_gpio: 133 to 8 gpio interrupt mux initialized [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000243] Console: colour dummy device 80x25 [ 0.000570] printk: console [tty0] enabled [ 0.000640] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000656] pid_max: default: 32768 minimum: 301 [ 0.000739] LSM: Security Framework initializing [ 0.000817] AppArmor: AppArmor initialized [ 0.000863] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.000881] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.002078] rcu: Hierarchical SRCU implementation. [ 0.002795] EFI services will not be available. [ 0.002955] smp: Bringing up secondary CPUs ... [ 0.003365] Detected VIPT I-cache on CPU1 [ 0.003417] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.003812] Detected VIPT I-cache on CPU2 [ 0.003839] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.004277] Detected VIPT I-cache on CPU3 [ 0.004296] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.004340] smp: Brought up 1 node, 4 CPUs [ 0.004361] SMP: Total of 4 processors activated. [ 0.004369] CPU features: detected: 32-bit EL0 Support [ 0.004378] CPU features: detected: CRC32 instructions [ 0.012620] CPU: All CPU(s) started at EL2 [ 0.012669] alternatives: patching kernel code [ 0.013518] devtmpfs: initialized [ 0.017907] Registered cp15_barrier emulation handler [ 0.017933] Registered setend emulation handler [ 0.017944] KASLR disabled due to lack of seed [ 0.018167] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.018189] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.024086] xor: measuring software checksum speed [ 0.064108] 8regs : 3037.000 MB/sec [ 0.104134] 32regs : 3486.000 MB/sec [ 0.144166] arm64_neon: 2957.000 MB/sec [ 0.144174] xor: using function: 32regs (3486.000 MB/sec) [ 0.144223] pinctrl core: initialized pinctrl subsystem [ 0.144681] DMI not present or invalid. [ 0.145064] NET: Registered protocol family 16 [ 0.146296] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.146369] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.146450] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.146526] audit: initializing netlink subsys (disabled) [ 0.146655] audit: type=2000 audit(0.144:1): state=initialized audit_enabled=0 res=1 [ 0.147474] thermal_sys: Registered thermal governor 'step_wise' [ 0.147670] cpuidle: using governor ladder [ 0.147697] cpuidle: using governor menu [ 0.147958] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.148029] ASID allocator initialised with 65536 entries [ 0.148587] Serial: AMBA PL011 UART driver [ 0.168526] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.168549] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.168559] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.168568] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.169999] cryptd: max_cpu_qlen set to 1000 [ 0.240277] raid6: neonx8 gen() 2746 MB/s [ 0.308318] raid6: neonx8 xor() 2058 MB/s [ 0.376360] raid6: neonx4 gen() 2812 MB/s [ 0.444408] raid6: neonx4 xor() 2035 MB/s [ 0.512450] raid6: neonx2 gen() 2666 MB/s [ 0.580495] raid6: neonx2 xor() 1894 MB/s [ 0.648543] raid6: neonx1 gen() 2330 MB/s [ 0.716586] raid6: neonx1 xor() 1599 MB/s [ 0.784631] raid6: int64x8 gen() 1908 MB/s [ 0.852694] raid6: int64x8 xor() 1004 MB/s [ 0.920722] raid6: int64x4 gen() 2126 MB/s [ 0.988772] raid6: int64x4 xor() 1073 MB/s [ 1.056819] raid6: int64x2 gen() 1811 MB/s [ 1.124853] raid6: int64x2 xor() 935 MB/s [ 1.192903] raid6: int64x1 gen() 1354 MB/s [ 1.260941] raid6: int64x1 xor() 716 MB/s [ 1.260949] raid6: using algorithm neonx4 gen() 2812 MB/s [ 1.260956] raid6: .... xor() 2035 MB/s, rmw enabled [ 1.260964] raid6: using neon recovery algorithm [ 1.261389] ACPI: Interpreter disabled. [ 1.261809] HDMI_P5V0: supplied by P5V0 [ 1.262590] iommu: Default domain type: Translated [ 1.262775] vgaarb: loaded [ 1.263237] SCSI subsystem initialized [ 1.263544] usbcore: registered new interface driver usbfs [ 1.263577] usbcore: registered new interface driver hub [ 1.263628] usbcore: registered new device driver usb [ 1.263885] pps_core: LinuxPPS API ver. 1 registered [ 1.263894] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.263913] PTP clock support registered [ 1.263943] EDAC MC: Ver: 3.0.0 [ 1.264443] FPGA manager framework [ 1.264509] Advanced Linux Sound Architecture Driver Initialized. [ 1.264937] NetLabel: Initializing [ 1.264946] NetLabel: domain hash size = 128 [ 1.264952] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.264997] NetLabel: unlabeled traffic allowed by default [ 1.265367] clocksource: Switched to clocksource arch_sys_counter [ 1.265556] VFS: Disk quotas dquot_6.6.0 [ 1.265600] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.265680] FS-Cache: Loaded [ 1.266087] AppArmor: AppArmor Filesystem Enabled [ 1.266637] pnp: PnP ACPI: disabled [ 1.270756] NET: Registered protocol family 2 [ 1.271179] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 1.271209] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.271263] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.271362] TCP: Hash tables configured (established 8192 bind 8192) [ 1.271475] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.271504] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.271635] NET: Registered protocol family 1 [ 1.271946] RPC: Registered named UNIX socket transport module. [ 1.271956] RPC: Registered udp transport module. [ 1.271964] RPC: Registered tcp transport module. [ 1.271971] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.271983] NET: Registered protocol family 44 [ 1.271996] PCI: CLS 0 bytes, default 64 [ 1.272152] Trying to unpack rootfs image as initramfs... [ 1.591979] Freeing initrd memory: 9608K [ 1.592768] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 1.594415] Initialise system trusted keyrings [ 1.594547] workingset: timestamp_bits=44 max_order=18 bucket_order=0 [ 1.598396] zbud: loaded [ 1.599443] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.599673] FS-Cache: Netfs 'nfs' registered for caching [ 1.600094] NFS: Registering the id_resolver key type [ 1.600122] Key type id_resolver registered [ 1.600130] Key type id_legacy registered [ 1.600200] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.600211] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.600959] FS-Cache: Netfs 'cifs' registered for caching [ 1.601154] Key type cifs.spnego registered [ 1.601168] Key type cifs.idmap registered [ 1.601180] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.601644] JFS: nTxBlock = 7332, nTxLock = 58658 [ 1.606689] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ 1.607912] ocfs2: Registered cluster interface o2cb [ 1.608036] OCFS2 User DLM kernel interface loaded [ 1.609294] gfs2: GFS2 installed [ 1.638756] NET: Registered protocol family 38 [ 1.638779] Key type asymmetric registered [ 1.638788] Asymmetric key parser 'x509' registered [ 1.638796] Asymmetric key parser 'pkcs8' registered [ 1.638832] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.638943] io scheduler mq-deadline registered [ 1.638952] io scheduler kyber registered [ 1.639041] io scheduler bfq registered [ 1.649796] soc soc0: Amlogic Meson GXBB (S905) Revision 1f:c (13:1) Detected [ 1.652917] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 1.654366] Serial: AMBA driver [ 1.654679] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 12, base_baud = 1500000) is a meson_uart [ 1.654794] serial serial0: tty port ttyAML6 registered [ 1.655077] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 15, base_baud = 1500000) is a meson_uart [ 2.723248] printk: console [ttyAML0] enabled [ 2.737247] brd: module loaded [ 2.743064] loop: module loaded [ 2.743720] Loading iSCSI transport class v2.0-870. [ 2.745936] iscsi: registered transport (tcp) [ 2.752547] libphy: Fixed MDIO Bus: probed [ 2.755832] VFIO - User Level meta-driver version: 0.3 [ 2.759842] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.765383] ehci-pci: EHCI PCI platform driver [ 2.769780] ehci-platform: EHCI generic platform driver [ 2.775022] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.781064] ohci-pci: OHCI PCI platform driver [ 2.785472] ohci-platform: OHCI generic platform driver [ 2.790966] usbcore: registered new interface driver usb-storage [ 2.796716] mousedev: PS/2 mouse device common for all mice [ 2.802705] i2c /dev entries driver [ 2.808475] sdhci: Secure Digital Host Controller Interface driver [ 2.811677] sdhci: Copyright(c) Pierre Ossman [ 2.816097] Synopsys Designware Multimedia Card Interface Driver [ 2.826042] meson-gx-mmc d0072000.mmc: Got CD GPIO [ 2.853688] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq [ 2.881014] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.881911] ledtrig-cpu: registered to indicate activity on CPUs [ 2.887410] meson-sm: secure-monitor enabled [ 2.891706] hid: raw HID events driver (C) Jiri Kosina [ 2.894108] mmc0: new high speed SDHC card at address aaaa [ 2.896689] usbcore: registered new interface driver usbhid [ 2.902546] mmcblk0: mmc0:aaaa SC16G 14.8 GiB [ 2.907285] usbhid: USB HID core driver [ 2.916300] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered [ 2.916837] mmcblk0: p1 p2 [ 2.927740] no UART detected at 0x1 [ 2.931337] NET: Registered protocol family 17 [ 2.933081] Key type dns_resolver registered [ 2.937569] registered taskstats version 1 [ 2.941164] Loading compiled-in X.509 certificates [ 2.946021] zswap: loaded using pool lzo/zbud [ 2.950428] Key type ._fscrypt registered [ 2.954192] Key type .fscrypt registered [ 2.958068] Key type fscrypt-provisioning registered [ 2.963580] Btrfs loaded, crc32c=crc32c-generic [ 2.980342] Key type encrypted registered [ 2.980388] AppArmor: AppArmor sha1 policy hashing enabled [ 2.998283] meson-drm d0100000.vpu: Queued 2 outputs on vpu [ 2.998779] meson-drm d0100000.vpu: CVBS Output connector not available [ 3.028822] mmc1: new HS200 MMC card at address 0001 [ 3.029424] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy) [ 3.029516] mmcblk1: mmc1:0001 016G70 14.7 GiB [ 3.038358] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver [ 3.042757] mmcblk1boot0: mmc1:0001 016G70 partition 1 4.00 MiB [ 3.050951] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops) [ 3.056395] mmcblk1boot1: mmc1:0001 016G70 partition 2 4.00 MiB [ 3.063966] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0 [ 3.069502] mmcblk1rpmb: mmc1:0001 016G70 partition 3 4.00 MiB, chardev (241:0) [ 3.085792] mmcblk1: p1 p2 [ 3.150936] random: fast init done [ 3.386060] Console: switching to colour frame buffer device 210x65 [ 3.402543] meson-drm d0100000.vpu: [drm] fb0: mesondrmfb frame buffer device [ 3.410712] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found [ 3.416180] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found [ 3.422427] meson8b-dwmac c9410000.ethernet: PTP uses main clock [ 3.428250] meson8b-dwmac c9410000.ethernet: no reset control found [ 3.435138] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37 [ 3.441548] meson8b-dwmac c9410000.ethernet: DWMAC1000 [ 3.446705] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported [ 3.454120] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported [ 3.461541] meson8b-dwmac c9410000.ethernet: COE Type 2 [ 3.466712] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported [ 3.473704] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported [ 3.480136] meson8b-dwmac c9410000.ethernet: Normal descriptors [ 3.485947] meson8b-dwmac c9410000.ethernet: Ring mode enabled [ 3.491728] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 3.499662] meson8b-dwmac c9410000.ethernet: device MAC address 32:b2:a9:c7:f4:e6 [ 3.507470] libphy: stmmac: probed [ 3.614802] dwc2 c9000000.usb: supply vusb_d not found, using dummy regulator [ 3.616495] dwc2 c9000000.usb: supply vusb_a not found, using dummy regulator [ 3.624723] phy phy-c0000000.phy.0: USB ID detect failed! [ 3.628827] phy phy-c0000000.phy.0: phy poweron failed --> -22 [ 3.634670] ------------[ cut here ]------------ [ 3.639175] WARNING: CPU: 0 PID: 34 at drivers/regulator/core.c:2089 _regulator_put.part.0+0x154/0x160 [ 3.648391] Modules linked in: [ 3.651413] CPU: 0 PID: 34 Comm: kworker/0:1 Not tainted 5.9.0-arm-64 #20.10 [ 3.658396] Hardware name: Tronsmart Vega S95 Pro (DT) [ 3.663494] Workqueue: events deferred_probe_work_func [ 3.668576] pstate: 80000005 (Nzcv daif -PAN -UAO BTYPE=--) [ 3.674095] pc : _regulator_put.part.0+0x154/0x160 [ 3.678838] lr : regulator_put+0x38/0x50 [ 3.682718] sp : ffff80001014bae0 [ 3.685995] x29: ffff80001014bae0 x28: ffff800012a07000 [ 3.691257] x27: ffff80001004bcd8 x26: ffff00003dd528c8 [ 3.696518] x25: ffff800012aeb700 x24: ffff00003ddf2c00 [ 3.701779] x23: 0000000000000008 x22: ffff80001014bbb8 [ 3.707041] x21: ffff00003dd15400 x20: ffff800012ad7150 [ 3.712302] x19: ffff000029e75f00 x18: 0000000000000010 [ 3.717563] x17: 0000000000000001 x16: 0000000000000000 [ 3.722824] x15: 0000000000aaaaaa x14: 0000000000000020 [ 3.728086] x13: 00000000ffffffff x12: ffffffffffffffff [ 3.733347] x11: 0000000000000040 x10: 0000000000000007 [ 3.738608] x9 : 00000000ffffffff x8 : ffffffffffffffe0 [ 3.743869] x7 : ffffffffffffffff x6 : ffffffffffffffff [ 3.749131] x5 : 0000000000000000 x4 : 0000000000000000 [ 3.754392] x3 : ffff800012ad7520 x2 : ffff00003dd15400 [ 3.759653] x1 : 0000000000000000 x0 : 0000000000000001 [ 3.764915] Call trace: [ 3.768099] _regulator_put.part.0+0x154/0x160 [ 3.771730] regulator_put+0x38/0x50 [ 3.775267] regulator_bulk_free+0x38/0x58 [ 3.779321] devm_regulator_bulk_release+0x1c/0x28 [ 3.784065] release_nodes+0x1b0/0x228 [ 3.787773] devres_release_all+0x38/0x60 [ 3.791740] really_probe+0x1d8/0x3b0 [ 3.795363] driver_probe_device+0x58/0xb8 [ 3.799416] __device_attach_driver+0x84/0xc8 [ 3.803730] bus_for_each_drv+0x78/0xc8 [ 3.807524] __device_attach+0xf0/0x150 [ 3.811319] device_initial_probe+0x14/0x20 [ 3.815459] bus_probe_device+0x9c/0xa8 [ 3.819255] deferred_probe_work_func+0x74/0xb0 [ 3.823742] process_one_work+0x1a0/0x328 [ 3.827706] worker_thread+0x1f8/0x420 [ 3.831416] kthread+0x140/0x160 [ 3.834608] ret_from_fork+0x10/0x34 [ 3.838142] ---[ end trace 53dcfd993148bc4f ]--- [ 3.842869] ------------[ cut here ]------------ [ 3.847287] WARNING: CPU: 0 PID: 34 at drivers/regulator/core.c:2089 _regulator_put.part.0+0x154/0x160 [ 3.856511] Modules linked in: [ 3.859534] CPU: 0 PID: 34 Comm: kworker/0:1 Tainted: G W 5.9.0-arm-64 #20.10 [ 3.867897] Hardware name: Tronsmart Vega S95 Pro (DT) [ 3.872990] Workqueue: events deferred_probe_work_func [ 3.878076] pstate: 80000005 (Nzcv daif -PAN -UAO BTYPE=--) [ 3.883597] pc : _regulator_put.part.0+0x154/0x160 [ 3.888340] lr : regulator_put+0x38/0x50 [ 3.892219] sp : ffff80001014bae0 [ 3.895497] x29: ffff80001014bae0 x28: ffff800012a07000 [ 3.900758] x27: ffff80001004bcd8 x26: ffff00003dd528c8 [ 3.906019] x25: ffff800012aeb700 x24: ffff00003ddf2c00 [ 3.911281] x23: 0000000000000008 x22: ffff80001014bbb8 [ 3.916542] x21: ffff00003dd15400 x20: ffff800012ad7150 [ 3.921803] x19: ffff000029e75000 x18: 0000000000000010 [ 3.927064] x17: 0000000000000001 x16: 0000000000000000 [ 3.932325] x15: 0000000000000004 x14: 0000000000000020 [ 3.937587] x13: 0000000000000000 x12: ffff00003f0ada38 [ 3.942848] x11: ffff00003f0ad918 x10: ffff00000733b698 [ 3.948109] x9 : ffff00000733b690 x8 : 0000000000000001 [ 3.953370] x7 : 0000000000000001 x6 : ffff00003f058900 [ 3.958632] x5 : ffff00000732c8f8 x4 : 0000000000000000 [ 3.963893] x3 : ffff800012ad7520 x2 : ffff00003dd15400 [ 3.969154] x1 : 0000000000000000 x0 : 0000000000000001 [ 3.974415] Call trace: [ 3.976971] _regulator_put.part.0+0x154/0x160 [ 3.981231] regulator_put+0x38/0x50 [ 3.984768] regulator_bulk_free+0x38/0x58 [ 3.988822] devm_regulator_bulk_release+0x1c/0x28 [ 3.993565] release_nodes+0x1b0/0x228 [ 3.997274] devres_release_all+0x38/0x60 [ 4.001241] really_probe+0x1d8/0x3b0 [ 4.004863] driver_probe_device+0x58/0xb8 [ 4.008917] __device_attach_driver+0x84/0xc8 [ 4.013231] bus_for_each_drv+0x78/0xc8 [ 4.017025] __device_attach+0xf0/0x150 [ 4.020820] device_initial_probe+0x14/0x20 [ 4.024961] bus_probe_device+0x9c/0xa8 [ 4.028756] deferred_probe_work_func+0x74/0xb0 [ 4.033241] process_one_work+0x1a0/0x328 [ 4.037207] worker_thread+0x1f8/0x420 [ 4.040917] kthread+0x140/0x160 [ 4.044109] ret_from_fork+0x10/0x34 [ 4.047642] ---[ end trace 53dcfd993148bc50 ]--- [ 4.052391] dwc2: probe of c9000000.usb failed with error -22 [ 4.058865] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator [ 4.065085] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator [ 4.129604] dwc2 c9100000.usb: DWC OTG Controller [ 4.132332] dwc2 c9100000.usb: new USB bus registered, assigned bus number 1 [ 4.138380] dwc2 c9100000.usb: irq 39, io mem 0xc9100000 [ 4.143740] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09 [ 4.151807] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.158969] usb usb1: Product: DWC OTG Controller [ 4.163622] usb usb1: Manufacturer: Linux 5.9.0-arm-64 dwc2_hsotg [ 4.169662] usb usb1: SerialNumber: c9100000.usb [ 4.174641] hub 1-0:1.0: USB hub found [ 4.177959] hub 1-0:1.0: 1 port detected [ 4.183835] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq [ 4.214759] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware [ 4.225686] simple-framebuffer 3f935000.framebuffer: framebuffer at 0x3f935000, 0x6baa80 bytes, mapped to 0x(____ptrval____) [ 4.234465] simple-framebuffer 3f935000.framebuffer: format=x8r8g8b8, mode=1680x1050x32, linelength=6720 [ 4.244038] simple-framebuffer 3f935000.framebuffer: fb1: simplefb registered! [ 4.253465] printk: console [netcon0] enabled [ 4.257599] netconsole: network logging started [ 4.261865] ALSA device list: [ 4.262870] mmc2: queuing unknown CIS tuple 0x80 (2 bytes) [ 4.264975] No soundcards found. [ 4.271289] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.280134] mmc2: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.280212] Freeing unused kernel memory: 3392K [ 4.287238] mmc2: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.287943] Run /init as init process [ 4.371901] mmc2: new high speed SDIO card at address 0001 [ 4.577431] usb 1-1: new high-speed USB device number 2 using dwc2 [ 4.790899] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 4.800919] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.807792] usb 1-1: Product: USB2.0 Hub [ 4.812757] hub 1-1:1.0: USB hub found [ 4.816332] hub 1-1:1.0: 4 ports detected [ 5.248354] EXT4-fs (mmcblk0p2): mounted filesystem with writeback data mode. Opts: data=writeback [ 6.128347] systemd[1]: System time before build time, advancing clock. [ 6.233703] NET: Registered protocol family 10 [ 6.265211] Segment Routing with IPv6 [ 6.311618] systemd[1]: systemd 246.2-1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 6.338737] systemd[1]: Detected architecture arm64. [ 6.411481] systemd[1]: Set hostname to <arm-64>. [ 6.952530] systemd[1]: Queued start job for default target Graphical Interface. [ 6.959474] random: systemd: uninitialized urandom read (16 bytes read) [ 6.967577] systemd[1]: Created slice system-getty.slice. [ 6.976499] random: systemd: uninitialized urandom read (16 bytes read) [ 6.982608] systemd[1]: Created slice system-modprobe.slice. [ 6.991717] random: systemd: uninitialized urandom read (16 bytes read) [ 6.997905] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 7.008755] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 7.019089] systemd[1]: Created slice User and Session Slice. [ 7.028025] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped. [ 7.040173] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.052107] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 7.062732] systemd[1]: Reached target Local Encrypted Volumes. [ 7.073296] systemd[1]: Reached target Paths. [ 7.082598] systemd[1]: Reached target Remote File Systems. [ 7.092033] systemd[1]: Reached target Slices. [ 7.101479] systemd[1]: Reached target Swap. [ 7.110943] systemd[1]: Reached target System Time Set. [ 7.120943] systemd[1]: Listening on Syslog Socket. [ 7.130926] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.141888] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 7.153227] systemd[1]: Listening on Journal Audit Socket. [ 7.163596] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.174266] systemd[1]: Listening on Journal Socket. [ 7.184690] systemd[1]: Listening on udev Control Socket. [ 7.194873] systemd[1]: Listening on udev Kernel Socket. [ 7.208111] systemd[1]: Mounting Huge Pages File System... [ 7.221735] systemd[1]: Mounting POSIX Message Queue File System... [ 7.235892] systemd[1]: Mounting Kernel Debug File System... [ 7.246474] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 7.258577] systemd[1]: Starting Restore / save the current clock... [ 7.273114] systemd[1]: Starting Set the console keyboard layout... [ 7.287363] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 7.300527] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. [ 7.312037] systemd[1]: Started Nameserver information manager. [ 7.323459] systemd[1]: Reached target Network (Pre). [ 7.338640] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 7.350066] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 7.364266] systemd[1]: Starting Load Kernel Modules... [ 7.378189] systemd[1]: Starting Remount Root and Kernel File Systems... [ 7.393197] systemd[1]: Starting Coldplug All udev Devices... [ 7.408859] systemd[1]: Mounted Huge Pages File System. [ 7.413986] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=600,errors=remount-ro [ 7.428475] systemd[1]: Mounted POSIX Message Queue File System. [ 7.439127] systemd[1]: Mounted Kernel Debug File System. [ 7.450342] systemd[1]: Finished Restore / save the current clock. [ 7.462559] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 7.479294] systemd[1]: Finished Load Kernel Modules. [ 7.491408] systemd[1]: Finished Remount Root and Kernel File Systems. [ 7.504192] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 7.515752] systemd[1]: Mounting Kernel Configuration File System... [ 7.530618] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 7.538817] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 7.551243] systemd[1]: Starting Load/Save Random Seed... [ 7.565096] systemd[1]: Starting Apply Kernel Variables... [ 7.579180] systemd[1]: Starting Create System Users... [ 7.594236] systemd[1]: Finished Set the console keyboard layout. [ 7.608111] systemd[1]: Mounted Kernel Configuration File System. Armbian 20.10 Bullseye ttyAML0 arm-64 login: root Password: _ ____ __ __ __ _ _ / \ | _ \| \/ | / /_ | || | / _ \ | |_) | |\/| |_____| '_ \| || |_ / ___ \| _ <| | | |_____| (_) |__ _| /_/ \_\_| \_\_| |_| \___/ |_| Welcome to Armbian 20.10 Bullseye with Linux 5.9.0-arm-64 No end-user support: built from trunk & unsupported (bullseye) userspace! System load: 2% Up time: 22 min Memory usage: 11% of 919M IP: 192.168.2.121 192.168.2.251 192.168.2.240 CPU temp: 44°C Usage of /: 11% of 14G [ General system configuration (beta): armbian-config ] root@arm-64:~# shutdown now [ 1384.266963] reboot: Power down INFO: PSCI Affinity Map: INFO: AffInst: Level 0, MPID 0x0, State ON INFO: AffInst: Level 0, MPID 0x1, State ON INFO: AffInst: Level 0, MPID 0x2, State ON INFO: AffInst: Level 0, MPID 0x3, State ON bl31 reboot reason: 0xd bl31 reboot reason: 0xd system cmd 0. bl30 get wakeup sources! process command 00000006 bl30 enter suspend! store restore gp0 pll cpu clk suspend rate 1536000000 suspend_counter: 1 Enter ddr suspend first time suspend process command 00000001 CEC cfg:0x0000 set vddee to 0x0352mv 0891 Here is the log of the failed boot from EMMC: Boot from eMMC: --------------- GXBB:BL1:08dafd:0a8993;FEAT:EDFC318C;POC:3;RCY:0;EMMC:0;READ:0;CHK:0; no sdio debug board detected TE: 83807 BL2 Built : 12:06:06, Jun 13 2016. gxb g176ecdb - laiyin.mo@droid12-sz set vcck to 1100 mv set vddee to 1000 mv Board ID = 1 CPU clk: 1536MHz DDR chl: Rank0+1 same @ 792MHz DDR0: 1024MB(auto)-2T-11 DataBus test pass! AddrBus test pass! -s Load fip header from eMMC, src: 0x0000c000, des: 0x01400000, size: 0x00004000 New fip structure! Load bl30 from eMMC, src: 0x00010000, des: 0x01000000, size: 0x0000d460 Sending bl30......................................................OK. Run bl30... Load bl31 from eMMC, src: 0x00020000, des: 0x1010[000, size: 0x00013140 Image: gxb_v1.1.3134-b387442 2016-06-16 14:48:44 yun.cai@droid06] OPS=0x13 d4 13 d6 d1 28 0 66 3 d 34 7f 3b [0.17Load bl33 from eMMC, src: 0x00034000, des: 0x01000000, size: 0x0006af00 0236 Inits done] secure task start! high task start! low task start! NOTICE: BL3-1: v1.0(debug):c813a61 NOTICE: BL3-1: Built : 14:47:05, Jun 16 2016 INFO: BL3-1: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader ERROR: Error initializing runtime service opteed_fast INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address = 0x1000000 INFO: BL3-1: Next image spsr = 0x3c9 U-Boot 2015.01-00018-g6c5824b-dirty (Oct 12 2017 - 18:36:33) DRAM: 1 GiB Relocation Offset is: 36f3b000 register usb cfg[1][0] = 0000000037f96ac0 register usb cfg[0][1] = 0000000037f96ae0 register usb cfg[2][0] = 0000000037f96b00 vpu: error: vpu: check dts: FDT_ERR_BADMAGIC, load default parameters vpu: clk_level = 7 vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300) MMC: SDIO Port C: 0, SDIO Port B: 1 emmc/sd response timeout, cmd8, status=0x3ff2800 emmc/sd response timeout, cmd55, status=0x3ff2800 [mmc_startup] mmc refix success [mmc_init] mmc init success In: serial Out: serial Err: serial reboot_mode=cold_boot hpd_state=1 [1080p60hz] is invalid for cvbs. set hdmitx VIC = 16 config HPLL = 2970 HPLL: 0xc800023d config HPLL done j = 4 vid_clk_div = 1 hdmitx phy setting done hdmitx: set enc for VIC: 16 enc_vpu_bridge_reset[1162] rx version is 1.4 or below div=10 Net: Meson_Ethernet Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** libfdt fdt_check_header(): FDT_ERR_BADMAGIC [OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters [OSD]fb_addr for logo: 0x3d800000 [OSD]check dts: FDT_ERR_BADMAGIC, load default fb_addr parameters [OSD]fb_addr for logo: 0x3d800000 [CANVAS]addr=0x3d800000 width=5760, height=2160 Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** There is no valid bmp file at the given address Hit Enter or space or Ctrl+C key to stop autoboot -- : 0 Device: SDIO Port C Manufacturer ID: 11 OEM: 100 Name: 016G7 Tran Speed: 52000000 Rd Block Len: 512 MMC version 5.0 High Capacity: Yes Capacity: 14.7 GiB mmc clock: 40000000 Bus Width: 8-bit DDR reading s905_autoscript 537 bytes read in 3 ms (174.8 KiB/s) ## Executing script at 01020000 start amlogic old u-boot ## Error: "bootfromsd" not defined reading boot_android ** Unable to read file boot_android ** ** Bad device usb 0 ** reading u-boot.ext 521171 bytes read in 10 ms (49.7 MiB/s) ## Starting application at 0x01000000 ... U-Boot 2020.07-dirty (Oct 24 2020 - 21:14:30 +0200) hexdump-gxbb Model: hexdump serial u-boot gxbb SoC: Amlogic Meson GXBB (S905) Revision 1f:c (13:1) DRAM: 1 GiB MMC: mmc@70000: 0, mmc@72000: 1, mmc@74000: 2 In: serial@4c0 Out: serial@4c0 Err: serial@4c0 Net: Warning: ethernet@c9410000 (eth0) using random MAC address - 1a:69:e8:d0:6c:88 eth0: ethernet@c9410000 Hit any key to stop autoboot: 0 Card did not respond to voltage select! switch to partitions #0, OK mmc2 is current device ** No partition table - mmc 2 ** Speed: 1000, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 BOOTP broadcast 5 BOOTP broadcast 6 BOOTP broadcast 7 BOOTP broadcast 8 BOOTP broadcast 9 BOOTP broadcast 10 Here is some info about /dev/mmcblk1: root@arm-64:~# fdisk -l /dev/mmcblk1 Disk /dev/mmcblk1: 14.68 GiB, 15758000128 bytes, 30777344 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x8509a0e7 Device Boot Start End Sectors Size Id Type /dev/mmcblk1p1 16384 1196031 1179648 576M b W95 FAT32 /dev/mmcblk1p2 1196032 15235071 14039040 6.7G 83 Linux root@arm-64:~# e2label /dev/mmcblk1p2 ROOT_EMMC root@arm-64:~# ls -1 /dev/mmcblk1* /dev/mmcblk1 /dev/mmcblk1boot0 /dev/mmcblk1boot1 /dev/mmcblk1p1 /dev/mmcblk1p2 /dev/mmcblk1rpmb root@arm-64:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk0 179:0 0 14.8G 0 disk ├─mmcblk0p1 179:1 0 512M 0 part /boot └─mmcblk0p2 179:2 0 14.2G 0 part / mmcblk1 179:32 0 14.7G 0 disk ├─mmcblk1p1 179:33 0 576M 0 part └─mmcblk1p2 179:34 0 6.7G 0 part mmcblk1boot0 179:64 0 4M 1 disk mmcblk1boot1 179:96 0 4M 1 disk zram0 254:0 0 50M 0 disk /var/log zram1 254:1 0 459.9M 0 disk [SWAP] root@arm-64:~# mount /dev/mmcblk1p1 /mnt/p1 root@arm-64:~# ls -l /mnt/p1 total 55808 -rwxr-xr-x 1 root root 1536 Sep 4 20:16 armbian_first_run.txt.template -rwxr-xr-x 1 root root 38518 Sep 4 20:16 boot.bmp -rwxr-xr-x 1 root root 216810 Sep 4 20:16 config-5.9.0-arm-64 drwxr-xr-x 5 root root 4096 Sep 4 20:16 dtb -rwxr-xr-x 1 root root 174 Sep 4 20:16 emmc_autoscript drwxr-xr-x 2 root root 4096 Sep 4 20:16 extlinux -rwxr-xr-x 1 root root 9882610 Sep 4 20:16 initrd.img-5.9.0-arm-64 -rwxr-xr-x 1 root root 537 Sep 4 20:16 s905_autoscript -rwxr-xr-x 1 root root 5794743 Sep 4 20:16 System.map-5.9.0-arm-64 -rwxr-xr-x 1 root root 609247 Sep 4 20:16 u-boot.emmc -rwxr-xr-x 1 root root 609247 Sep 4 20:16 u-boot.ext -rwxr-xr-x 1 root root 609247 Sep 4 20:16 u-boot-s905 -rwxr-xr-x 1 root root 740080 Sep 4 20:16 u-boot-s905x2-s922 -rwxr-xr-x 1 root root 650183 Sep 4 20:16 u-boot-s905x-s912 -rwxr-xr-x 1 root root 9882674 Sep 4 20:16 uInitrd -rwxr-xr-x 1 root root 28078592 Sep 4 20:16 zImage root@arm-64:~# mount /dev/mmcblk1p2 /mnt/p2 root@arm-64:~# ls -l /mnt/p2 total 80 lrwxrwxrwx 1 root root 7 Aug 30 2020 bin -> usr/bin drwxr-xr-x 2 root root 4096 Sep 4 20:17 dev drwxr-xr-x 86 root root 4096 Sep 4 20:18 etc drwxr-xr-x 3 root root 4096 Sep 3 13:24 home lrwxrwxrwx 1 root root 7 Aug 30 2020 lib -> usr/lib drwxr-xr-x 2 root root 4096 Oct 14 2020 lib64 drwx------ 2 root root 16384 Sep 4 20:16 lost+found drwxr-xr-x 2 root root 4096 Sep 4 20:17 media drwxr-xr-x 2 root root 4096 Sep 4 20:17 mnt drwxr-xr-x 2 root root 4096 Aug 30 2020 opt drwxr-xr-x 2 root root 4096 Sep 4 20:17 proc drwx------ 6 root root 4096 Sep 4 20:18 root drwxr-xr-x 2 root root 4096 Sep 4 20:17 run lrwxrwxrwx 1 root root 8 Aug 30 2020 sbin -> usr/sbin drwxrwxr-x 2 root root 4096 Oct 14 2020 selinux drwxr-xr-x 2 root root 4096 Aug 30 2020 srv drwxr-xr-x 2 root root 4096 Sep 4 20:17 sys drwxr-xr-x 2 root root 4096 Sep 4 20:17 tmp drwxr-xr-x 11 root root 4096 Aug 30 2020 usr drwxr-xr-x 12 root root 4096 Oct 14 2020 var I apologize if this is not the correct forum for this. Pls let me know and will move it. Thank you, Pista
×
×
  • Create New...