HI,
i just want to report my experience with Armbian_5.03_Orangepione_Debian_jessie_3.4.110 image. i had a very strange behavior, not consistent at all when using tthe DVI script.bin file (i have erased symbolic link /boot/script.bin that pointed to /boot/bin/orangepione.bin and replaced it with a new one pointing to orangepione_hdmi2dvi.bin). i'm also using a passive hdmi to dvi adapted in a LG LCD with DVI-D input.
i have 5 boards, all of them orange pi one, and i tested in 3 of them, with this result:
1) first one, booted successfully, and showed the console, i could actually used it, but cfinteractive, used 100% of the cpu, oscilating the load between 2.0 and 3.0, with a notorious lag at tipping. i shutdown the device with shutdown -h now. unplugged and reviewed the .bin file to see if dvfs config was the one for the overpowered board. it was. i tried to boot again, but i had no image.
2) i tried with a second board, same SD card. this showed a picture, but then i saw a message that the third core halted 22s. then black screen and i never saw an image.
3) third board, it boot, show the console, with glitches, then suddenly image dissapear, and never saw the image again.
i tested several times with new images, tested the 3 boards again too with the default hdmi image, and had no troubles at all. no load, no temperature.
when it was on DVI mode, the temp was 33c, when was in hdmi mode, was in 40c. with a base temp of 29.3c/30c
so, if someone wants me to do some other kind of testing, i'm willing to help in anyway i can. i will try tomorrow to set up the SSH connection to the board, so i could get the console stream, see logs and execute code in the meantime is plugged into the monitor with no image.
