paolobasile

I have a problem with my Opi z+, it is assumed that its maximum frequency is 1200 Mhz, but it does not rise from 816 Mhz. I use a Raspberry charger, of 3000 mha. I changed the governor to performance but it does not go up to 816 Mhz. I use Armbian, based on ubuntu 18.04

I have removed and inserted the card 100 times, but it still fails. It is a pity, but I give for lost the OPZ.

Ok, i checkout this. Howerver this id my nand. https://drive.google.com/file/d/1AhQo-vYapDZu5aBkQ0_543CJ93U61mmB/view?usp=drivesdk

I've only been able to start an Ubuntu distribution, of all the ones I've tried, a version manipulated and prepared by Orange pi. In it, from the command console I could see the status of the nand memory.

I have used both versions but none works. The image message appears but stays black. It is important to say that if I do not introduce any SD card, the board starts Android (from emmc memory) How can I format that memory completely? I think it's the problem I can use an ubuntu version that works from the orange page

I have tried with 3 different cards, all of them samsung, with the versions of ubuntu and debian and with 3 chargers that work with 3 raspberrys pi 3 The problem does not seem to be voltage or intensity

I use this adapter. https://www.amazon.es/gp/product/B01DDFFOYK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

I download the image of this page, unzip the image and use rufus to burn it in a Samsung SD 32 GB evo. I use power supply of 3000 mah https://www.armbian.com/orange-pi-zero-2-h5/ It always fails, and it starts a reboot and kernel panic cycle What image i need use?