odin

Members
  • Content Count

    19
  • Joined

  • Last visited

About odin

  • Rank
    Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Are you talking about new aml models or current aml models already released?
  2. @balbes150 is their any reason the beelink-gt1.dtb is missing from the dev build? also under armbian-config (using the g200 dtb) I can only set the max speed to 1000mhz, I thought the s912 soc could do 1500.... (edit ok I had to rm /etc/default/cpufrequtils to reset it, seems to be a glitch in armbian-config ?)
  3. Hi everyone I got the box pretty much setup nicely now, using the wifi fix above it fixes the wifi (though I had to set the wlan0 MTU to 1200 or ssh would freeze up not a big deal), is it possible to get bluetooth working too,? or not possible, I noticed if I used the g200 dtb the Bluetooth icon wouldn't show but if I use the beelink gt1 dtb I get the bt icon but when I click on it it disappears and doesn't work..... I rarely use BT so not a bug deal.. Also I was wondering about video acceleration for the s912 I keep going through threads but can't find useful info, the Test.mp4 vi
  4. I tried installing the firmware from the pkg manager but still get the same error
  5. I am getting this error for wifi anyideas? [ 10.999555] ath10k_sdio mmc2:0001:1: Failed to find firmware-N.bin (N between 2 and 6) from ath10k/QCA9377/hw1.0: -2 [ 10.999564] ath10k_sdio mmc2:0001:1: could not fetch firmware files (-2)
  6. thanks, it will be interesting if we can get this to boot Edit: I tried the vim2 uboot + the VIM2_Ubuntu-gnome-focal_Linux-5.7-rc7_arm64_SD-USB_V0.9-20200530.7z and the system did boot, besides for being somewhat slow, I have a wierd ghosting effect for the mouse cursor and somehow need to get wifi working, I would rather run armbian though..... but at least I got something booted Edit2: Ok somehow ( i dont know how), armbian started booting using the vim2 uboot , however I cannot get hdmi audio working and also the in-built wifi is not working (I think it has a
  7. thanks I tried it but no hdmi output, here is what the serial console log shows. GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:800;NAND:82;SD:0;READ:0;0.0;CHK:0; no sdio debug board detected TE: 1645927 BL2 Built : 19:41:49, Jun 20 2016. gxl ge299011 - xiaobo.gu@droid05 set vdd cpu_a to 1120 mv set vdd cpu_b to 1050 mv set vddee to 1000 mv Board ID = 1 CPU clk: 1200MHz DDR3 chl: Rank0+1 @ 912MHz - PASS DQS-corr enabled DDR scramble enabled Rank0: 1024MB(auto)-2T-13 Rank1: 1024MB(auto)-2T-13 DataBus test pass! AddrBus test pass! Load fip header from SD, src: 0x0000c200, de
  8. ok I hooked a serial console up and this is just what it shows (standard startup) 1. Normal Boot (no hdmi signal, no logo, just blue light) GXM:BL1:dc8b51:76f1a5;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:800;NAND:82;SD:800;USB:8;LOOP:1;EMMC:800;NAND:82;SD:800;USB:8;LOOP:2;EMMC:800;NAND:82;SD:800;USB:8;LOOP:3;EMMC:800;NAND:82;SD:800;USB:8;LOOP:4;EMMC:800;NAND:82;SD:800;USB:8;LOOP:5;EMMC:800;NAND:82;SD:800;USB:8;LOOP:6;EMMC:800;NAND:82;SD:800;USB:8;LOOP:7;EMMC:800;NAND:82;SD:800;USB:8;LOOP:8;EMMC:800;NAND:82;SD:800;USB:8;LOOP:9;EMMC:800;NAND:82;SD:800;USB:8;LOOP:A;EMMC:800;NAND:82;SD:800;USB:8;L
  9. Before I throw this device away I want to make sure I tried everything, The emmc / storage is completely shot, I tried the USB_Burning_Tool to restore the firmware but quickly fails at formating step, I tried the sdcard Burn_Card_Maker which did succed in booting, but quickly fails when showing the Upgrading screen. with nothing plugged in it doesn't show the amlogic logo or any hdmi signal, holding the reset button doesnt do anything either. so my question is can I boot anything with the aml_sdc_burn.UBOOT, I flashed the armbian image and added the aml_sdc_burn.UB
  10. @balbes150 sorry to bother you again, I tried all methods, the internal memory emmc chip is dead/fried, as far as I can tell the rest of the hardware still works, and it boots up in service mode like you said, but I was only able to get sdcard twrp img and the upgrade sdcard to boot (using Burn_Card_Maker), so is it possible to boot armbian from service mode similar to how the others work?, the internal emmc seems to be completely fried., the usb ports don't activate unless booting from the upgrade or twrp img, so it might have to boot through the tf-slot , then to the usb port if possibl
  11. Thanks, though I am completely lost, I can boot external twrp from a sdcard in the tf-slot (well freezes but trys to boot) and the upgrade program, does armbian only boot from usb slots or can it boot from the tf card reader slot too? since that's what I am trying to do, I don't know how to erase the emmc, I tried bot windows and linux burn tools and completely fails writing partitions.
  12. @balbes150 I am hoping you can help me out with this, I have a H96 Pro 2/16 (cz-s32-v2.2) s912 , and I think the EMMC died , I tried USB_Burning_tool to restore the stock image and it failed at formating , when I plug it into the tv I get no amlogic logo and no hdmi signal, however if I boot using the sdcard upgrade method (upgrade.img and uboot) (only in the tf reader) it shows the little robot with upgrading, but it quickly fails withing a few seconds....so yeah I think emmc is shot. But since this can boot off the tfreader slot I was hoping to use armbian, I tried ev
  13. @balbes150 do you have plans to add the qca9377 driver + other modules to some of the other distros like opensuse ?
  14. Thanks koakh, works great for my h96 pro+ wifi (qca9377), now it works on bootup. - also if anyone has any ideas on my next problem let me know, I am using Armbian_5.41_S9xxx_Ubuntu_xenial_3.14.29_mate_20180307.img (mali6), and overall it works great, is it possible to get hardware accelerated video to work or videos to play better fullscreen, I tried several software smplayer, vlc, xine (a little better then others),mpv and all are pretty laggy (unwatchable), window mode they play ok , kodi crashes the display.