• Content Count

  • Joined

  • Last visited

About ginkrust

  • Rank

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. ginkrust

    ARMBIAN for Amlogic S905 and S905X (ver 5.44 =<)

    I was confused, my box doesn't have 9082xs it needs ssv6051 drivers which armbian @balbes150 supports after installing all relevant firmware deb files, i see in dmesg *** sta_cfg_set, /usr/lib/firmware/ssv6051/ssv6051-wifi.cfg *** [ 80.459198] ERROR: filp_open I looked for the file, is in /lib/firmware instead my quick fix ln -s /lib/firmware /usr/lib/firmware now wifi works. Using Armbian_5.41_S9xxx_Debian_stretch_3.14.29_server_20180305.img.xz device: s905w based x96 mini with ssv6051
  2. ginkrust

    ARMBIAN for Amlogic S905 and S905X (ver 5.44 =<)

    thanks @balbes150 do you plan to add 9082xs driver to khadas-3.14 branch? Many new devices now with S905W + 9082xs based wifi i can help test and donate device if you want
  3. ginkrust

    ARMBIAN for Amlogic S905 and S905X (ver 5.44 =<)

    @deranger can I ask you for directions on which dtb file for that? I have the 1/8 variant of an s905w with wifi only working on a LE build. tried many dtb files.
  4. ginkrust

    ARMBIAN for Amlogic S905 and S905X (ver 5.44 =<)

    @balbes150 thank you amazing work. Your armbian 3.14.29 works very well on s905w (x96 mini 1GB/8GB), only wifi no luck. I followed tutorial, tried various dtb files, modprobe both wifi_dummy and dhd and couldn't get wifi to work. nothing showsup on iwconfig from my research chip is bad binary only wifi 9082xs/ssv6200 and your image doesn't support this yet (please tell me if wrong!) tried LE 3.14.29 kernel version and wifi work on LE, so searching github i found what commit added support I am confused how to add support to your image. Maybe you support already I just don't know how to enable. Maybe I need to recompile kernel with prebuilt ko file and change configuration I copied the modules from LE, modeprobe works! dmesg say: SSV6XXX_SDIO sdio:0001:1: vendor = 0x3030 device = 0x3030 but then fails to initialize the device, modprobe tainted I think the other changes to the kernel config are needed. I tried to recompile the kernel but failed at first steps if I have to recompile the kernel, what branch should i use for armbian or 3.14? I found instructions in post but seems old (different branches now). any link or direction will help many thanks